| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAOKSTBs6F=RWEWOv5OkLd25GsOk1c9Xf8yX6WSy_sKvLmdX86w@mail.gmail.com>
Date: Mon, 2 Nov 2020 13:29:44 -0300
From: Gilberto Nunes <gilberto.nunes32@...il.com>
To: Heiner Kallweit <hkallweit1@...il.com>
Cc: netdev@...r.kernel.org
Subject: Re: Fwd: Problem with r8169 module
>From kernel 5.4
ethtool -d enp1s0f1
RealTek RTL8411 registers:
--------------------------------------------------------
0x00: MAC Address 98:29:a6:e6:e5:6a
0x08: Multicast Address Filter 0xffffffff 0xffffffff
0x10: Dump Tally Counter Command 0xffffe000 0x00000000
0x20: Tx Normal Priority Ring Addr 0xff50b000 0x00000000
0x28: Tx High Priority Ring Addr 0x00000000 0x00000000
0x30: Flash memory read/write 0x00000000
0x34: Early Rx Byte Count 0
0x36: Early Rx Status 0x00
0x37: Command 0x0c
Rx on, Tx on
0x3C: Interrupt Mask 0x003f
LinkChg RxNoBuf TxErr TxOK RxErr RxOK
0x3E: Interrupt Status 0x0000
0x40: Tx Configuration 0x5f800f80
0x44: Rx Configuration 0x0002cf0f
0x48: Timer count 0x00000000
0x4C: Missed packet counter 0x000000
0x50: EEPROM Command 0x10
0x51: Config 0 0x00
0x52: Config 1 0xcf
0x53: Config 2 0x3c
0x54: Config 3 0x60
0x55: Config 4 0x11
0x56: Config 5 0x02
0x58: Timer interrupt 0x00000000
0x5C: Multiple Interrupt Select 0x0000
0x60: PHY access 0x00000000
0x64: TBI control and status 0x12011025
0x68: TBI Autonegotiation advertisement (ANAR) 0xf02c
0x6A: TBI Link partner ability (LPAR) 0x8000
0x6C: PHY status 0xeb
0x84: PM wakeup frame 0 0x00000000 0x00000000
0x8C: PM wakeup frame 1 0x00000000 0x00000000
0x94: PM wakeup frame 2 (low) 0x00000000 0x00000000
0x9C: PM wakeup frame 2 (high) 0x00000000 0x00000000
0xA4: PM wakeup frame 3 (low) 0x00000000 0x00000000
0xAC: PM wakeup frame 3 (high) 0x00000000 0x00000001
0xB4: PM wakeup frame 4 (low) 0x00000000 0xd205cde1
0xBC: PM wakeup frame 4 (high) 0x00000000 0x00000000
0xC4: Wakeup frame 0 CRC 0x0000
0xC6: Wakeup frame 1 CRC 0x0000
0xC8: Wakeup frame 2 CRC 0x0000
0xCA: Wakeup frame 3 CRC 0x0000
0xCC: Wakeup frame 4 CRC 0x0000
0xDA: RX packet maximum size 0x4000
0xE0: C+ Command 0x2060
VLAN de-tagging
RX checksumming
0xE2: Interrupt Mitigation 0x0000
TxTimer: 0
TxPackets: 0
RxTimer: 0
RxPackets: 0
0xE4: Rx Ring Addr 0xff50f000 0x00000000
0xEC: Early Tx threshold 0x27
0xF0: Func Event 0x0000003f
0xF4: Func Event Mask 0x00000000
0xF8: Func Preset State 0x00000003
0xFC: Func Force Event 0x00000000
>From kernel 5.9.3
ethtool -d enp1s0f1
RealTek RTL8411 registers:
--------------------------------------------------------
0x00: MAC Address 98:29:a6:e6:e5:6a
0x08: Multicast Address Filter 0xffffffff 0xffffffff
0x10: Dump Tally Counter Command 0xffffe000 0x00000000
0x20: Tx Normal Priority Ring Addr 0xff582000 0x00000000
0x28: Tx High Priority Ring Addr 0x00000000 0x00000000
0x30: Flash memory read/write 0x00000000
0x34: Early Rx Byte Count 0
0x36: Early Rx Status 0x00
0x37: Command 0x0c
Rx on, Tx on
0x3C: Interrupt Mask 0x003f
LinkChg RxNoBuf TxErr TxOK RxErr RxOK
0x3E: Interrupt Status 0x0000
0x40: Tx Configuration 0x5f800f80
0x44: Rx Configuration 0x0002cf0f
0x48: Timer count 0x00000000
0x4C: Missed packet counter 0x000000
0x50: EEPROM Command 0x10
0x51: Config 0 0x00
0x52: Config 1 0xcf
0x53: Config 2 0x3c
0x54: Config 3 0x60
0x55: Config 4 0x11
0x56: Config 5 0x02
0x58: Timer interrupt 0x00000000
0x5C: Multiple Interrupt Select 0x0000
0x60: PHY access 0x00000000
0x64: TBI control and status 0x12011025
0x68: TBI Autonegotiation advertisement (ANAR) 0xf02c
0x6A: TBI Link partner ability (LPAR) 0x8000
0x6C: PHY status 0xeb
0x84: PM wakeup frame 0 0x00000000 0x00000000
0x8C: PM wakeup frame 1 0x00000000 0x00000000
0x94: PM wakeup frame 2 (low) 0x00000000 0x00000000
0x9C: PM wakeup frame 2 (high) 0x00000000 0x00000000
0xA4: PM wakeup frame 3 (low) 0x00000000 0x00000000
0xAC: PM wakeup frame 3 (high) 0x00000000 0x00000001
0xB4: PM wakeup frame 4 (low) 0x00000000 0xd21a30de
0xBC: PM wakeup frame 4 (high) 0x00000000 0x00000000
0xC4: Wakeup frame 0 CRC 0x0000
0xC6: Wakeup frame 1 CRC 0x0000
0xC8: Wakeup frame 2 CRC 0x0000
0xCA: Wakeup frame 3 CRC 0x0000
0xCC: Wakeup frame 4 CRC 0x0000
0xDA: RX packet maximum size 0x4000
0xE0: C+ Command 0x2060
VLAN de-tagging
RX checksumming
0xE2: Interrupt Mitigation 0x0000
TxTimer: 0
TxPackets: 0
RxTimer: 0
RxPackets: 0
0xE4: Rx Ring Addr 0xff583000 0x00000000
0xEC: Early Tx threshold 0x27
0xF0: Func Event 0x0000003f
0xF4: Func Event Mask 0x00000000
0xF8: Func Preset State 0x00000003
0xFC: Func Force Event 0x00000000
I also noticed this message when ran update-initramfs -k all -u when
installed kernel 5.9.3.
I had made a git clone from linux-firmware and copied this missed
firmware but no change!
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8125b-2.fw for
module r8169
---
Gilberto Nunes Ferreira
Em seg., 2 de nov. de 2020 às 10:40, Heiner Kallweit
<hkallweit1@...il.com> escreveu:
>
> On 02.11.2020 14:20, Gilberto Nunes wrote:
> > Hi
> >
> > ethtool using 5.4
> >
> ethtool doesn't know about the actual speed, because the downshift
> occurs PHY-internally. Please test actual the speed.
> Alternatively provide the output of ethtool -d <if>, the RTL8169
> chip family has an internal register refkecting the actual link speed.
Powered by blists - more mailing lists