| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20201102231307.13021-2-pmenzel@molgen.mpg.de>
Date: Tue, 3 Nov 2020 00:13:06 +0100
From: Paul Menzel <pmenzel@...gen.mpg.de>
To: Jesse Brandeburg <jesse.brandeburg@...el.com>,
Tony Nguyen <anthony.l.nguyen@...el.com>
Cc: Jeffrey Townsend <jeffrey.townsend@...switch.com>,
"David S . Miller" <davem@...emloft.net>,
Jakub Kicinski <kuba@...nel.org>,
intel-wired-lan@...ts.osuosl.org, netdev@...r.kernel.org,
linux-kernel@...r.kernel.org,
John W Linville <linville@...driver.com>,
Paul Menzel <pmenzel@...gen.mpg.de>
Subject: [PATCH 1/2] ethernet: igb: Support PHY BCM5461S
From: Jeffrey Townsend <jeffrey.townsend@...switch.com>
The BCM5461S PHY is used in switches.
The patch is taken from Open Network Linux, and it was added there as
patch
packages/base/any/kernels/3.16+deb8/patches/driver-support-intel-igb-bcm5461X-phy.patch
in ONL commit f32316c63c (Support the BCM54616 and BCM5461S.) [1]. Part
of this commit was already upstreamed in Linux commit eeb0149660 (igb:
support BCM54616 PHY) in 2017.
I applied the forward-ported
packages/base/any/kernels/5.4-lts/patches/0002-driver-support-intel-igb-bcm5461S-phy.patch
added in ONL commit 5ace6bcdb3 (Add 5.4 LTS kernel build.) [2].
[1]: https://github.com/opencomputeproject/OpenNetworkLinux/commit/f32316c63ce3a64de125b7429115c6d45e942bd1
[2]: https://github.com/opencomputeproject/OpenNetworkLinux/commit/5ace6bcdb37cb8065dcd1d4404b3dcb6424f6331
Cc: Jeffrey Townsend <jeffrey.townsend@...switch.com>
Cc: John W Linville <linville@...driver.com>
Signed-off-by: Paul Menzel <pmenzel@...gen.mpg.de>
---
drivers/net/ethernet/intel/igb/e1000_82575.c | 23 +++++-
.../net/ethernet/intel/igb/e1000_defines.h | 1 +
drivers/net/ethernet/intel/igb/e1000_hw.h | 1 +
drivers/net/ethernet/intel/igb/e1000_phy.c | 77 +++++++++++++++++++
drivers/net/ethernet/intel/igb/e1000_phy.h | 2 +
drivers/net/ethernet/intel/igb/igb_main.c | 8 ++
6 files changed, 111 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/intel/igb/e1000_82575.c b/drivers/net/ethernet/intel/igb/e1000_82575.c
index 50863fd87d53..83c14ae689b1 100644
--- a/drivers/net/ethernet/intel/igb/e1000_82575.c
+++ b/drivers/net/ethernet/intel/igb/e1000_82575.c
@@ -308,6 +308,12 @@ static s32 igb_init_phy_params_82575(struct e1000_hw *hw)
phy->ops.set_d3_lplu_state = igb_set_d3_lplu_state_82580;
phy->ops.force_speed_duplex = igb_phy_force_speed_duplex_m88;
break;
+ case BCM5461S_PHY_ID:
+ phy->type = e1000_phy_bcm5461s;
+ phy->ops.check_polarity = NULL;
+ phy->ops.get_cable_length = NULL;
+ phy->ops.force_speed_duplex = igb_phy_force_speed_duplex_82580;
+ break;
case BCM54616_E_PHY_ID:
phy->type = e1000_phy_bcm54616;
break;
@@ -866,6 +872,16 @@ static s32 igb_get_phy_id_82575(struct e1000_hw *hw)
goto out;
}
ret_val = igb_get_phy_id(hw);
+ if (ret_val && hw->mac.type == e1000_i354) {
+ /* we do a special check for bcm5461s phy by setting
+ * the phy->addr to 5 and doing the phy check again. This
+ * call will succeed and retrieve a valid phy id if we have
+ * the bcm5461s phy
+ */
+ phy->addr = 5;
+ phy->type = e1000_phy_bcm5461s;
+ ret_val = igb_get_phy_id(hw);
+ }
goto out;
}
@@ -1253,6 +1269,9 @@ static s32 igb_get_cfg_done_82575(struct e1000_hw *hw)
(hw->phy.type == e1000_phy_igp_3))
igb_phy_init_script_igp3(hw);
+ if (hw->phy.type == e1000_phy_bcm5461s)
+ igb_phy_init_script_5461s(hw);
+
return 0;
}
@@ -1582,6 +1601,7 @@ static s32 igb_setup_copper_link_82575(struct e1000_hw *hw)
case e1000_i350:
case e1000_i210:
case e1000_i211:
+ case e1000_i354:
phpm_reg = rd32(E1000_82580_PHY_POWER_MGMT);
phpm_reg &= ~E1000_82580_PM_GO_LINKD;
wr32(E1000_82580_PHY_POWER_MGMT, phpm_reg);
@@ -1627,7 +1647,8 @@ static s32 igb_setup_copper_link_82575(struct e1000_hw *hw)
ret_val = igb_copper_link_setup_82580(hw);
break;
case e1000_phy_bcm54616:
- ret_val = 0;
+ break;
+ case e1000_phy_bcm5461s:
break;
default:
ret_val = -E1000_ERR_PHY;
diff --git a/drivers/net/ethernet/intel/igb/e1000_defines.h b/drivers/net/ethernet/intel/igb/e1000_defines.h
index d2e2c50ce257..0561ef6cb29c 100644
--- a/drivers/net/ethernet/intel/igb/e1000_defines.h
+++ b/drivers/net/ethernet/intel/igb/e1000_defines.h
@@ -886,6 +886,7 @@
#define M88E1543_E_PHY_ID 0x01410EA0
#define M88E1512_E_PHY_ID 0x01410DD0
#define BCM54616_E_PHY_ID 0x03625D10
+#define BCM5461S_PHY_ID 0x002060C0
/* M88E1000 Specific Registers */
#define M88E1000_PHY_SPEC_CTRL 0x10 /* PHY Specific Control Register */
diff --git a/drivers/net/ethernet/intel/igb/e1000_hw.h b/drivers/net/ethernet/intel/igb/e1000_hw.h
index 5d87957b2627..a660675d6218 100644
--- a/drivers/net/ethernet/intel/igb/e1000_hw.h
+++ b/drivers/net/ethernet/intel/igb/e1000_hw.h
@@ -110,6 +110,7 @@ enum e1000_phy_type {
e1000_phy_82580,
e1000_phy_i210,
e1000_phy_bcm54616,
+ e1000_phy_bcm5461s,
};
enum e1000_bus_type {
diff --git a/drivers/net/ethernet/intel/igb/e1000_phy.c b/drivers/net/ethernet/intel/igb/e1000_phy.c
index 8c8eb82e6272..4e0b4ba09a00 100644
--- a/drivers/net/ethernet/intel/igb/e1000_phy.c
+++ b/drivers/net/ethernet/intel/igb/e1000_phy.c
@@ -126,6 +126,13 @@ s32 igb_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data)
* Control register. The MAC will take care of interfacing with the
* PHY to retrieve the desired data.
*/
+ if (phy->type == e1000_phy_bcm5461s) {
+ mdic = rd32(E1000_MDICNFG);
+ mdic &= ~E1000_MDICNFG_PHY_MASK;
+ mdic |= (phy->addr << E1000_MDICNFG_PHY_SHIFT);
+ wr32(E1000_MDICNFG, mdic);
+ }
+
mdic = ((offset << E1000_MDIC_REG_SHIFT) |
(phy->addr << E1000_MDIC_PHY_SHIFT) |
(E1000_MDIC_OP_READ));
@@ -182,6 +189,13 @@ s32 igb_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data)
* Control register. The MAC will take care of interfacing with the
* PHY to retrieve the desired data.
*/
+ if (phy->type == e1000_phy_bcm5461s) {
+ mdic = rd32(E1000_MDICNFG);
+ mdic &= ~E1000_MDICNFG_PHY_MASK;
+ mdic |= (phy->addr << E1000_MDICNFG_PHY_SHIFT);
+ wr32(E1000_MDICNFG, mdic);
+ }
+
mdic = (((u32)data) |
(offset << E1000_MDIC_REG_SHIFT) |
(phy->addr << E1000_MDIC_PHY_SHIFT) |
@@ -2628,3 +2642,66 @@ static s32 igb_set_master_slave_mode(struct e1000_hw *hw)
return hw->phy.ops.write_reg(hw, PHY_1000T_CTRL, phy_data);
}
+
+/**
+ * igb_phy_init_script_5461s - Inits the BCM5461S PHY
+ * @hw: pointer to the HW structure
+ *
+ * Initializes a Broadcom Gigabit PHY.
+ **/
+s32 igb_phy_init_script_5461s(struct e1000_hw *hw)
+{
+ u16 mii_reg_led = 0;
+
+ /* 1. Speed LED (Set the Link LED mode), Shadow 00010, 0x1C.bit2=1 */
+ hw->phy.ops.write_reg(hw, 0x1C, 0x0800);
+ hw->phy.ops.read_reg(hw, 0x1C, &mii_reg_led);
+ mii_reg_led |= 0x0004;
+ hw->phy.ops.write_reg(hw, 0x1C, mii_reg_led | 0x8000);
+
+ /* 2. Active LED (Set the Link LED mode), Shadow 01001, 0x1C.bit4=1, 0x10.bit5=0 */
+ hw->phy.ops.write_reg(hw, 0x1C, 0x2400);
+ hw->phy.ops.read_reg(hw, 0x1C, &mii_reg_led);
+ mii_reg_led |= 0x0010;
+ hw->phy.ops.write_reg(hw, 0x1C, mii_reg_led | 0x8000);
+ hw->phy.ops.read_reg(hw, 0x10, &mii_reg_led);
+ mii_reg_led &= 0xffdf;
+ hw->phy.ops.write_reg(hw, 0x10, mii_reg_led);
+
+ return 0;
+}
+
+/**
+ * igb_get_phy_info_5461s - Retrieve 5461s PHY information
+ * @hw: pointer to the HW structure
+ *
+ * Read PHY status to determine if link is up. If link is up, then
+ * set/determine 10base-T extended distance and polarity correction. Read
+ * PHY port status to determine MDI/MDIx and speed. Based on the speed,
+ * determine on the cable length, local and remote receiver.
+ **/
+s32 igb_get_phy_info_5461s(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val;
+ bool link;
+
+ ret_val = igb_phy_has_link(hw, 1, 0, &link);
+ if (ret_val)
+ goto out;
+
+ if (!link) {
+ ret_val = -E1000_ERR_CONFIG;
+ goto out;
+ }
+
+ phy->polarity_correction = true;
+
+ phy->is_mdix = true;
+ phy->cable_length = E1000_CABLE_LENGTH_UNDEFINED;
+ phy->local_rx = e1000_1000t_rx_status_ok;
+ phy->remote_rx = e1000_1000t_rx_status_ok;
+
+out:
+ return ret_val;
+}
diff --git a/drivers/net/ethernet/intel/igb/e1000_phy.h b/drivers/net/ethernet/intel/igb/e1000_phy.h
index 5894e4b1d0a8..aa888efc05f2 100644
--- a/drivers/net/ethernet/intel/igb/e1000_phy.h
+++ b/drivers/net/ethernet/intel/igb/e1000_phy.h
@@ -41,6 +41,8 @@ s32 igb_phy_has_link(struct e1000_hw *hw, u32 iterations,
void igb_power_up_phy_copper(struct e1000_hw *hw);
void igb_power_down_phy_copper(struct e1000_hw *hw);
s32 igb_phy_init_script_igp3(struct e1000_hw *hw);
+s32 igb_phy_init_script_5461s(struct e1000_hw *hw);
+s32 igb_get_phy_info_5461s(struct e1000_hw *hw);
s32 igb_initialize_M88E1512_phy(struct e1000_hw *hw);
s32 igb_initialize_M88E1543_phy(struct e1000_hw *hw);
s32 igb_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data);
diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index 5fc2c381da55..275fac4cbf63 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -8923,11 +8923,19 @@ static int igb_mii_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
data->phy_id = adapter->hw.phy.addr;
break;
case SIOCGMIIREG:
+ adapter->hw.phy.addr = data->phy_id;
if (igb_read_phy_reg(&adapter->hw, data->reg_num & 0x1F,
&data->val_out))
return -EIO;
break;
case SIOCSMIIREG:
+ if (!capable(CAP_NET_ADMIN))
+ return -EPERM;
+ adapter->hw.phy.addr = data->phy_id;
+ if (igb_write_phy_reg(&adapter->hw, data->reg_num & 0x1F,
+ data->val_in))
+ return -EIO;
+ break;
default:
return -EOPNOTSUPP;
}
--
2.29.1
Powered by blists - more mailing lists