netdev - [PATCH] IPv6: Set SIT tunnel hard_header

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <20201103104133.GA1573211@tws>
Date:   Tue, 3 Nov 2020 11:41:33 +0100
From:   Oliver Herms <oliver.peter.herms@...il.com>
To:     netdev@...r.kernel.org
Cc:     davem@...emloft.net, kuznet@....inr.ac.ru, yoshfuji@...ux-ipv6.org,
        kuba@...nel.org
Subject: [PATCH] IPv6: Set SIT tunnel hard_header_len to zero

Due to the legacy usage of hard_header_len for SIT tunnels while
already using infrastructure from net/ipv4/ip_tunnel.c the
calculation of the path MTU in tnl_update_pmtu is incorrect.
This leads to unnecessary creation of MTU exceptions for any
flow going over a SIT tunnel.

As SIT tunnels do not have a header themsevles other than their
transport (L3, L2) headers we're leaving hard_header_len set to zero
as tnl_update_pmtu is already taking care of the transport headers
sizes.

This will also help avoiding unnecessary IPv6 GC runs and spinlock
contention seen when using SIT tunnels and for more than
net.ipv6.route.gc_thresh flows.

Fixes: c54419321455 ("GRE: Refactor GRE tunneling code.")
Signed-off-by: Oliver Herms <oliver.peter.herms@...il.com>
---
 net/ipv6/sit.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/net/ipv6/sit.c b/net/ipv6/sit.c
index 5e2c34c0ac97..5e7983cb6154 100644
--- a/net/ipv6/sit.c
+++ b/net/ipv6/sit.c
@@ -1128,7 +1128,6 @@ static void ipip6_tunnel_bind_dev(struct net_device *dev)
 	if (tdev && !netif_is_l3_master(tdev)) {
 		int t_hlen = tunnel->hlen + sizeof(struct iphdr);

-		dev->hard_header_len = tdev->hard_header_len + sizeof(struct iphdr);
 		dev->mtu = tdev->mtu - t_hlen;
 		if (dev->mtu < IPV6_MIN_MTU)
 			dev->mtu = IPV6_MIN_MTU;
@@ -1426,7 +1425,6 @@ static void ipip6_tunnel_setup(struct net_device *dev)
 	dev->priv_destructor	= ipip6_dev_free;

 	dev->type		= ARPHRD_SIT;
-	dev->hard_header_len	= LL_MAX_HEADER + t_hlen;
 	dev->mtu		= ETH_DATA_LEN - t_hlen;
 	dev->min_mtu		= IPV6_MIN_MTU;
 	dev->max_mtu		= IP6_MAX_MTU - t_hlen;
-- 
2.25.1