lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite for Android: free password hash cracker in your pocket
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20201107153139.3552-2-andrea.mayer@uniroma2.it>
Date:   Sat,  7 Nov 2020 16:31:35 +0100
From:   Andrea Mayer <andrea.mayer@...roma2.it>
To:     "David S. Miller" <davem@...emloft.net>,
        David Ahern <dsahern@...nel.org>,
        Alexey Kuznetsov <kuznet@....inr.ac.ru>,
        Hideaki YOSHIFUJI <yoshfuji@...ux-ipv6.org>,
        Jakub Kicinski <kuba@...nel.org>,
        Shuah Khan <shuah@...nel.org>,
        Shrijeet Mukherjee <shrijeet@...il.com>,
        Alexei Starovoitov <ast@...nel.org>,
        Daniel Borkmann <daniel@...earbox.net>,
        Andrii Nakryiko <andrii@...nel.org>,
        Martin KaFai Lau <kafai@...com>,
        Song Liu <songliubraving@...com>, Yonghong Song <yhs@...com>,
        John Fastabend <john.fastabend@...il.com>,
        KP Singh <kpsingh@...omium.org>, netdev@...r.kernel.org,
        linux-kernel@...r.kernel.org, linux-kselftest@...r.kernel.org
Cc:     Stefano Salsano <stefano.salsano@...roma2.it>,
        Paolo Lungaroni <paolo.lungaroni@...t.it>,
        Ahmed Abdelsalam <ahabdels.dev@...il.com>,
        Andrea Mayer <andrea.mayer@...roma2.it>
Subject: [net-next,v2,1/5] vrf: add mac header for tunneled packets when sniffer is attached

Before this patch, a sniffer attached to a VRF used as the receiving
interface of L3 tunneled packets detects them as malformed packets and
it complains about that (i.e.: tcpdump shows bogus packets).

The reason is that a tunneled L3 packet does not carry any L2
information and when the VRF is set as the receiving interface of a
decapsulated L3 packet, no mac header is currently set or valid.
Therefore, the purpose of this patch consists of adding a MAC header to
any packet which is directly received on the VRF interface ONLY IF:

 i) a sniffer is attached on the VRF and ii) the mac header is not set.

In this case, the mac address of the VRF is copied in both the
destination and the source address of the ethernet header. The protocol
type is set either to IPv4 or IPv6, depending on which L3 packet is
received.

Signed-off-by: Andrea Mayer <andrea.mayer@...roma2.it>
---
 drivers/net/vrf.c | 78 +++++++++++++++++++++++++++++++++++++++++++----
 1 file changed, 72 insertions(+), 6 deletions(-)

diff --git a/drivers/net/vrf.c b/drivers/net/vrf.c
index 60c1aadece89..26f2ed02a5c1 100644
--- a/drivers/net/vrf.c
+++ b/drivers/net/vrf.c
@@ -1263,6 +1263,61 @@ static void vrf_ip6_input_dst(struct sk_buff *skb, struct net_device *vrf_dev,
 	skb_dst_set(skb, &rt6->dst);
 }
 
+static int vrf_prepare_mac_header(struct sk_buff *skb,
+				  struct net_device *vrf_dev, u16 proto)
+{
+	struct ethhdr *eth;
+	int err;
+
+	/* in general, we do not know if there is enough space in the head of
+	 * the packet for hosting the mac header.
+	 */
+	err = skb_cow_head(skb, LL_RESERVED_SPACE(vrf_dev));
+	if (unlikely(err))
+		/* no space in the skb head */
+		return -ENOBUFS;
+
+	__skb_push(skb, ETH_HLEN);
+	eth = (struct ethhdr *)skb->data;
+
+	skb_reset_mac_header(skb);
+
+	/* we set the ethernet destination and the source addresses to the
+	 * address of the VRF device.
+	 */
+	ether_addr_copy(eth->h_dest, vrf_dev->dev_addr);
+	ether_addr_copy(eth->h_source, vrf_dev->dev_addr);
+	eth->h_proto = htons(proto);
+
+	/* the destination address of the Ethernet frame corresponds to the
+	 * address set on the VRF interface; therefore, the packet is intended
+	 * to be processed locally.
+	 */
+	skb->protocol = eth->h_proto;
+	skb->pkt_type = PACKET_HOST;
+
+	skb_postpush_rcsum(skb, skb->data, ETH_HLEN);
+
+	skb_pull_inline(skb, ETH_HLEN);
+
+	return 0;
+}
+
+/* prepare and add the mac header to the packet if it was not set previously.
+ * In this way, packet sniffers such as tcpdump can parse the packet correctly.
+ * If the mac header was already set, the original mac header is left
+ * untouched and the function returns immediately.
+ */
+static int vrf_add_mac_header_if_unset(struct sk_buff *skb,
+				       struct net_device *vrf_dev,
+				       u16 proto)
+{
+	if (skb_mac_header_was_set(skb))
+		return 0;
+
+	return vrf_prepare_mac_header(skb, vrf_dev, proto);
+}
+
 static struct sk_buff *vrf_ip6_rcv(struct net_device *vrf_dev,
 				   struct sk_buff *skb)
 {
@@ -1289,9 +1344,15 @@ static struct sk_buff *vrf_ip6_rcv(struct net_device *vrf_dev,
 		skb->skb_iif = vrf_dev->ifindex;
 
 		if (!list_empty(&vrf_dev->ptype_all)) {
-			skb_push(skb, skb->mac_len);
-			dev_queue_xmit_nit(skb, vrf_dev);
-			skb_pull(skb, skb->mac_len);
+			int err;
+
+			err = vrf_add_mac_header_if_unset(skb, vrf_dev,
+							  ETH_P_IPV6);
+			if (likely(!err)) {
+				skb_push(skb, skb->mac_len);
+				dev_queue_xmit_nit(skb, vrf_dev);
+				skb_pull(skb, skb->mac_len);
+			}
 		}
 
 		IP6CB(skb)->flags |= IP6SKB_L3SLAVE;
@@ -1334,9 +1395,14 @@ static struct sk_buff *vrf_ip_rcv(struct net_device *vrf_dev,
 	vrf_rx_stats(vrf_dev, skb->len);
 
 	if (!list_empty(&vrf_dev->ptype_all)) {
-		skb_push(skb, skb->mac_len);
-		dev_queue_xmit_nit(skb, vrf_dev);
-		skb_pull(skb, skb->mac_len);
+		int err;
+
+		err = vrf_add_mac_header_if_unset(skb, vrf_dev, ETH_P_IP);
+		if (likely(!err)) {
+			skb_push(skb, skb->mac_len);
+			dev_queue_xmit_nit(skb, vrf_dev);
+			skb_pull(skb, skb->mac_len);
+		}
 	}
 
 	skb = vrf_rcv_nfhook(NFPROTO_IPV4, NF_INET_PRE_ROUTING, skb, vrf_dev);
-- 
2.20.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ