netdev - Re: [PATCH v2 net] net: udp: fix Fast/frag0 UDP GRO

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Mon, 9 Nov 2020 19:54:02 +0100
From:   Eric Dumazet <eric.dumazet@...il.com>
To:     Willem de Bruijn <willemdebruijn.kernel@...il.com>,
        Eric Dumazet <eric.dumazet@...il.com>
Cc:     Alexander Lobakin <alobakin@...me>,
        "David S. Miller" <davem@...emloft.net>,
        Jakub Kicinski <kuba@...nel.org>,
        Alexey Kuznetsov <kuznet@....inr.ac.ru>,
        Hideaki YOSHIFUJI <yoshfuji@...ux-ipv6.org>,
        Paolo Abeni <pabeni@...hat.com>,
        Network Development <netdev@...r.kernel.org>,
        linux-kernel <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v2 net] net: udp: fix Fast/frag0 UDP GRO



On 11/9/20 7:28 PM, Willem de Bruijn wrote:
> On Mon, Nov 9, 2020 at 12:37 PM Eric Dumazet <eric.dumazet@...il.com> wrote:
>>
>>
>>
>> On 11/9/20 5:56 PM, Alexander Lobakin wrote:
>>> While testing UDP GSO fraglists forwarding through driver that uses
>>> Fast GRO (via napi_gro_frags()), I was observing lots of out-of-order
>>> iperf packets:
>>>
>>> [ ID] Interval           Transfer     Bitrate         Jitter
>>> [SUM]  0.0-40.0 sec  12106 datagrams received out-of-order
>>>
>>> Simple switch to napi_gro_receive() any other method without frag0
>>> shortcut completely resolved them.
>>>
>>> I've found that UDP GRO uses udp_hdr(skb) in its .gro_receive()
>>> callback. While it's probably OK for non-frag0 paths (when all
>>> headers or even the entire frame are already in skb->data), this
>>> inline points to junk when using Fast GRO (napi_gro_frags() or
>>> napi_gro_receive() with only Ethernet header in skb->data and all
>>> the rest in shinfo->frags) and breaks GRO packet compilation and
>>> the packet flow itself.
>>> To support both modes, skb_gro_header_fast() + skb_gro_header_slow()
>>> are typically used. UDP even has an inline helper that makes use of
>>> them, udp_gro_udphdr(). Use that instead of troublemaking udp_hdr()
>>> to get rid of the out-of-order delivers.
>>>
>>> Present since the introduction of plain UDP GRO in 5.0-rc1.
>>>
>>> Since v1 [1]:
>>>  - added a NULL pointer check for "uh" as suggested by Willem.
>>>
>>> [1] https://lore.kernel.org/netdev/YazU6GEzBdpyZMDMwJirxDX7B4sualpDG68ADZYvJI@cp4-web-034.plabs.ch
>>>
>>> Fixes: e20cf8d3f1f7 ("udp: implement GRO for plain UDP sockets.")
>>> Signed-off-by: Alexander Lobakin <alobakin@...me>
>>> ---
>>>  net/ipv4/udp_offload.c | 7 ++++++-
>>>  1 file changed, 6 insertions(+), 1 deletion(-)
>>>
>>> diff --git a/net/ipv4/udp_offload.c b/net/ipv4/udp_offload.c
>>> index e67a66fbf27b..7f6bd221880a 100644
>>> --- a/net/ipv4/udp_offload.c
>>> +++ b/net/ipv4/udp_offload.c
>>> @@ -366,13 +366,18 @@ static struct sk_buff *udp4_ufo_fragment(struct sk_buff *skb,
>>>  static struct sk_buff *udp_gro_receive_segment(struct list_head *head,
>>>                                              struct sk_buff *skb)
>>>  {
>>> -     struct udphdr *uh = udp_hdr(skb);
>>> +     struct udphdr *uh = udp_gro_udphdr(skb);
>>>       struct sk_buff *pp = NULL;
>>>       struct udphdr *uh2;
>>>       struct sk_buff *p;
>>>       unsigned int ulen;
>>>       int ret = 0;
>>>
>>> +     if (unlikely(!uh)) {
>>
>> How uh could be NULL here ?
>>
>> My understanding is that udp_gro_receive() is called
>> only after udp4_gro_receive() or udp6_gro_receive()
>> validated that udp_gro_udphdr(skb) was not NULL.
> 
> Oh indeed. This has already been checked before.
> 
>>> +             NAPI_GRO_CB(skb)->flush = 1;
>>> +             return NULL;
>>> +     }
>>> +
>>>       /* requires non zero csum, for symmetry with GSO */
>>>       if (!uh->check) {
>>>               NAPI_GRO_CB(skb)->flush = 1;
>>>
>>
>> Why uh2 is left unchanged ?
>>
>>     uh2 = udp_hdr(p);
> 
> Isn't that the same as th2 = tcp_hdr(p) in tcp_gro_receive? no frag0
> optimization to worry about for packets on the list.

My feeling was that tcp_gro_receive() is terminal in the GRO stack.

While UDP could be encapsulated in UDP :)

I guess we do not support this yet.

Years ago we made sure to propagate the current header offset into GRO stack
(when we added SIT/IPIP/GRE support to GRO)
299603e8370a93dd5d8e8d800f0dff1ce2c53d36 ("net-gro: Prepare GRO stack for the upcoming tunneling support")


udp_hdr() is using transport header, which is unique for skb "on the list"