| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAL9ddJcS4oPhvOgsrXD6au0P8MFPBAoHW9TNEOTjMGB_jbwt-g@mail.gmail.com>
Date: Mon, 9 Nov 2020 13:02:43 -0800
From: David Awogbemila <awogbemila@...gle.com>
To: Saeed Mahameed <saeed@...nel.org>
Cc: netdev@...r.kernel.org, Catherine Sullivan <csully@...gle.com>,
Yangchun Fu <yangchun@...gle.com>
Subject: Re: [PATCH 1/4] gve: Add support for raw addressing device option
Actually, I think I'll adopt a helper static inline function - it may
be tidier than a macro.
On Fri, Nov 6, 2020 at 11:41 AM David Awogbemila <awogbemila@...gle.com> wrote:
>
> On Tue, Nov 3, 2020 at 2:43 PM Saeed Mahameed <saeed@...nel.org> wrote:
> >
> > On Tue, 2020-11-03 at 09:46 -0800, David Awogbemila wrote:
> > > From: Catherine Sullivan <csully@...gle.com>
> > >
> > > Add support to describe device for parsing device options. As
> > > the first device option, add raw addressing.
> > >
> > > "Raw Addressing" mode (as opposed to the current "qpl" mode) is an
> > > operational mode which allows the driver avoid bounce buffer copies
> > > which it currently performs using pre-allocated qpls
> > > (queue_page_lists)
> > > when sending and receiving packets.
> > > For egress packets, the provided skb data addresses will be
> > > dma_map'ed and
> > > passed to the device, allowing the NIC can perform DMA directly - the
> > > driver will not have to copy the buffer content into pre-allocated
> > > buffers/qpls (as in qpl mode).
> > > For ingress packets, copies are also eliminated as buffers are handed
> > > to
> > > the networking stack and then recycled or re-allocated as
> > > necessary, avoiding the use of skb_copy_to_linear_data().
> > >
> > > This patch only introduces the option to the driver.
> > > Subsequent patches will add the ingress and egress functionality.
> > >
> > > Reviewed-by: Yangchun Fu <yangchun@...gle.com>
> > > Signed-off-by: Catherine Sullivan <csully@...gle.com>
> > > Signed-off-by: David Awogbemila <awogbemila@...gle.com>
> > > ---
> > > drivers/net/ethernet/google/gve/gve.h | 1 +
> > > drivers/net/ethernet/google/gve/gve_adminq.c | 52
> > > ++++++++++++++++++++
> > > drivers/net/ethernet/google/gve/gve_adminq.h | 15 ++++--
> > > drivers/net/ethernet/google/gve/gve_main.c | 9 ++++
> > > 4 files changed, 73 insertions(+), 4 deletions(-)
> > >
> > > diff --git a/drivers/net/ethernet/google/gve/gve.h
> > > b/drivers/net/ethernet/google/gve/gve.h
> > > index f5c80229ea96..80cdae06ee39 100644
> > > --- a/drivers/net/ethernet/google/gve/gve.h
> > > +++ b/drivers/net/ethernet/google/gve/gve.h
> > > @@ -199,6 +199,7 @@ struct gve_priv {
> > > u64 num_registered_pages; /* num pages registered with NIC */
> > > u32 rx_copybreak; /* copy packets smaller than this */
> > > u16 default_num_queues; /* default num queues to set up */
> > > + bool raw_addressing; /* true if this dev supports raw
> > > addressing */
> > >
> > > struct gve_queue_config tx_cfg;
> > > struct gve_queue_config rx_cfg;
> > > diff --git a/drivers/net/ethernet/google/gve/gve_adminq.c
> > > b/drivers/net/ethernet/google/gve/gve_adminq.c
> > > index 24ae6a28a806..0b7a2653fe33 100644
> > > --- a/drivers/net/ethernet/google/gve/gve_adminq.c
> > > +++ b/drivers/net/ethernet/google/gve/gve_adminq.c
> > > @@ -460,11 +460,14 @@ int gve_adminq_destroy_rx_queues(struct
> > > gve_priv *priv, u32 num_queues)
> > > int gve_adminq_describe_device(struct gve_priv *priv)
> > > {
> > > struct gve_device_descriptor *descriptor;
> > > + struct gve_device_option *dev_opt;
> > > union gve_adminq_command cmd;
> > > dma_addr_t descriptor_bus;
> > > + u16 num_options;
> > > int err = 0;
> > > u8 *mac;
> > > u16 mtu;
> > > + int i;
> > >
> > > memset(&cmd, 0, sizeof(cmd));
> > > descriptor = dma_alloc_coherent(&priv->pdev->dev, PAGE_SIZE,
> > > @@ -518,6 +521,55 @@ int gve_adminq_describe_device(struct gve_priv
> > > *priv)
> > > priv->rx_desc_cnt = priv->rx_pages_per_qpl;
> > > }
> > > priv->default_num_queues = be16_to_cpu(descriptor-
> > > >default_num_queues);
> > > + dev_opt = (void *)(descriptor + 1);
> > > +
> > > + num_options = be16_to_cpu(descriptor->num_device_options);
> > > + for (i = 0; i < num_options; i++) {
> > > + u16 option_length = be16_to_cpu(dev_opt-
> > > >option_length);
> > > + u16 option_id = be16_to_cpu(dev_opt->option_id);
> > > + void *option_end;
> > > +
> > > + option_end = (void *)dev_opt + sizeof(*dev_opt) +
> > > option_length;
> > > + if (option_end > (void *)descriptor +
> > > be16_to_cpu(descriptor->total_length)) {
> > > + dev_err(&priv->dev->dev,
> > > + "options exceed device_descriptor's
> > > total length.\n");
> > > + err = -EINVAL;
> > > + goto free_device_descriptor;
> > > + }
> > > +
> > > + switch (option_id) {
> > > + case GVE_DEV_OPT_ID_RAW_ADDRESSING:
> > > + /* If the length or feature mask doesn't match,
> > > + * continue without enabling the feature.
> > > + */
> > > + if (option_length !=
> > > GVE_DEV_OPT_LEN_RAW_ADDRESSING ||
> > > + dev_opt->feat_mask !=
> > > + cpu_to_be32(GVE_DEV_OPT_FEAT_MASK_RAW_ADDRE
> > > SSING)) {
> > > + dev_warn(&priv->pdev->dev,
> > > + "Raw addressing option
> > > error:\n"
> > > + " Expected: length=%d,
> > > feature_mask=%x.\n"
> > > + " Actual: length=%d,
> > > feature_mask=%x.\n",
> > > + GVE_DEV_OPT_LEN_RAW_ADDRESSING
> > > ,
> > > + cpu_to_be32(GVE_DEV_OPT_FEAT_M
> > > ASK_RAW_ADDRESSING),
> > > + option_length, dev_opt-
> > > >feat_mask);
> > > + priv->raw_addressing = false;
> > > + } else {
> > > + dev_info(&priv->pdev->dev,
> > > + "Raw addressing device option
> > > enabled.\n");
> > > + priv->raw_addressing = true;
> > > + }
> > > + break;
> > > + default:
> > > + /* If we don't recognize the option just
> > > continue
> > > + * without doing anything.
> > > + */
> > > + dev_dbg(&priv->pdev->dev,
> > > + "Unrecognized device option 0x%hx not
> > > enabled.\n",
> > > + option_id);
> > > + break;
> > > + }
> > > + dev_opt = (void *)dev_opt + sizeof(*dev_opt) +
> > > option_length;
> >
> > This was already calculated above, "option_end"
> >
> >
> > Suggestion: you can make an iterator macro to return the next opt
> >
> > next_opt = GET_NEXT_OPT(descriptor, curr_opt);
> >
> > you can make it check boundaries and return null on last iteration or
> > when total length is exceeded, and just use it in a more readable
> > iterator loop.
> >
> Thanks for the suggestion. I will adopt a macro but it'll only return
> NULL if the options exceed the boundary - that way we can distinguish
> between an error (boundary exceeded) and the last option.
Powered by blists - more mailing lists