netdev - Re: [PATCH v2] can: m_can: Set device to software init mode before closing

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <4dfa600f-1167-e3c4-c9d5-d177f27cde92@pengutronix.de>
Date:   Wed, 11 Nov 2020 23:33:38 +0100
From:   Marc Kleine-Budde <mkl@...gutronix.de>
To:     Faiz Abbas <faiz_abbas@...com>, linux-kernel@...r.kernel.org,
        netdev@...r.kernel.org, linux-can@...r.kernel.org
Cc:     kuba@...nel.org, davem@...emloft.net, wg@...ndegger.com,
        sriram.dash@...sung.com, dmurphy@...com
Subject: Re: [PATCH v2] can: m_can: Set device to software init mode before
 closing

On 8/25/20 7:54 AM, Faiz Abbas wrote:
> There might be some requests pending in the buffer when the
> interface close sequence occurs. In some devices, these
> pending requests might lead to the module not shutting down
> properly when m_can_clk_stop() is called.
> 
> Therefore, move the device to init state before potentially
> powering it down.
> 
> Signed-off-by: Faiz Abbas <faiz_abbas@...com>

Added to linux-can/testing.

Tnx,
Marc

-- 
Pengutronix e.K.                 | Marc Kleine-Budde           |
Embedded Linux                   | https://www.pengutronix.de  |
Vertretung West/Dortmund         | Phone: +49-231-2826-924     |
Amtsgericht Hildesheim, HRA 2686 | Fax:   +49-5121-206917-5555 |



Download attachment "signature.asc" of type "application/pgp-signature" (489 bytes)