netdev - Re: [PATCH v12 5/5] selftest: mhi: Add support to test MHI LOOPBACK channel

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:   Tue, 17 Nov 2020 15:52:25 +0100
From:   Loic Poulain <loic.poulain@...aro.org>
To:     Hemant Kumar <hemantk@...eaurora.org>
Cc:     Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>,
        Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        linux-arm-msm <linux-arm-msm@...r.kernel.org>,
        open list <linux-kernel@...r.kernel.org>,
        Jeffrey Hugo <jhugo@...eaurora.org>,
        Bhaumik Bhatt <bbhatt@...eaurora.org>,
        Network Development <netdev@...r.kernel.org>,
        skhan@...uxfoundation.org
Subject: Re: [PATCH v12 5/5] selftest: mhi: Add support to test MHI LOOPBACK channel

On Mon, 16 Nov 2020 at 23:46, Hemant Kumar <hemantk@...eaurora.org> wrote:
>
> Loopback test opens the MHI device file node and writes
> a data buffer to it. MHI UCI kernel space driver copies
> the data and sends it to MHI uplink (Tx) LOOPBACK channel.
> MHI device loops back the same data to MHI downlink (Rx)
> LOOPBACK channel. This data is read by test application
> and compared against the data sent. Test passes if data
> buffer matches between Tx and Rx. Test application performs
> open(), poll(), write(), read() and close() file operations.
>
> Signed-off-by: Hemant Kumar <hemantk@...eaurora.org>
> ---
>  Documentation/mhi/uci.rst                          |  32 +
>  tools/testing/selftests/Makefile                   |   1 +
>  tools/testing/selftests/drivers/.gitignore         |   1 +
>  tools/testing/selftests/drivers/mhi/Makefile       |   8 +
>  tools/testing/selftests/drivers/mhi/config         |   2 +
>  .../testing/selftests/drivers/mhi/loopback_test.c  | 802 +++++++++++++++++++++
>  6 files changed, 846 insertions(+)
>  create mode 100644 tools/testing/selftests/drivers/mhi/Makefile
>  create mode 100644 tools/testing/selftests/drivers/mhi/config
>  create mode 100644 tools/testing/selftests/drivers/mhi/loopback_test.c
>
> diff --git a/Documentation/mhi/uci.rst b/Documentation/mhi/uci.rst
> index ce8740e..0a04afe 100644
> --- a/Documentation/mhi/uci.rst
> +++ b/Documentation/mhi/uci.rst
> @@ -79,6 +79,38 @@ MHI client driver performs read operation, same data gets looped back to MHI
>  host using LOOPBACK channel 1. LOOPBACK channel is used to verify data path
>  and data integrity between MHI Host and MHI device.
>
> +Loopback Test
> +~~~~~~~~~~~~~
> +
> +Loopback test application is used to verify data integrity between MHI host and
> +MHI device over LOOPBACK channel. This also confirms that basic MHI data path
> +is working properly. Test performs write() to send tx buffer to MHI device file
> +node for LOOPBACK uplink channel. MHI LOOPBACK downlink channel loops back
> +transmit data to MHI Host. Test application receives data in receive buffer as
> +part of read(). It verifies if tx buffer matches rx buffer. Test application
> +performs poll() before making write() and read() system calls. Test passes if
> +match is found.
> +
> +Test is present under tools/testing/selftests/drivers/mhi. It is compiled using
> +following command in same dir:-
> +
> +make loopback_test
> +
> +Test is run using following command arguments:-
> +
> +loopback_test -c <device_node> -b <transmit buffer size> -l <log level> -i
> +<number of iterations>
> +
> +Required argument:
> +-c : loopback chardev node
> +
> +Optional argument:
> +-b : transmit buffer size. If not present 1024 bytes size transmit buffer
> +     is sent.
> +-i : Number of iterations to perform, If not present only one transmit buffer
> +     is sent.
> +-l : Log level. If not present defaults to DBG_LVL_INFO.
> +
>  Other Use Cases
>  ---------------
>
> diff --git a/tools/testing/selftests/Makefile b/tools/testing/selftests/Makefile
> index d9c2835..084bc1e 100644
> --- a/tools/testing/selftests/Makefile
> +++ b/tools/testing/selftests/Makefile
> @@ -10,6 +10,7 @@ TARGETS += core
>  TARGETS += cpufreq
>  TARGETS += cpu-hotplug
>  TARGETS += drivers/dma-buf
> +TARGETS += drivers/mhi
>  TARGETS += efivarfs
>  TARGETS += exec
>  TARGETS += filesystems
> diff --git a/tools/testing/selftests/drivers/.gitignore b/tools/testing/selftests/drivers/.gitignore
> index ca74f2e..e4806d5 100644
> --- a/tools/testing/selftests/drivers/.gitignore
> +++ b/tools/testing/selftests/drivers/.gitignore
> @@ -1,2 +1,3 @@
>  # SPDX-License-Identifier: GPL-2.0-only
>  /dma-buf/udmabuf
> +/mhi/loopback_test
> diff --git a/tools/testing/selftests/drivers/mhi/Makefile b/tools/testing/selftests/drivers/mhi/Makefile
> new file mode 100644
> index 0000000..c06c925
> --- /dev/null
> +++ b/tools/testing/selftests/drivers/mhi/Makefile
> @@ -0,0 +1,8 @@
> +# SPDX-License-Identifier: GPL-2.0-only
> +CFLAGS += -I../../../../../usr/include/ -g -Wall
> +
> +LDLIBS = -lpthread
> +TEST_GEN_PROGS := loopback_test
> +
> +include ../../lib.mk
> +
> diff --git a/tools/testing/selftests/drivers/mhi/config b/tools/testing/selftests/drivers/mhi/config
> new file mode 100644
> index 0000000..471dc92
> --- /dev/null
> +++ b/tools/testing/selftests/drivers/mhi/config
> @@ -0,0 +1,2 @@
> +CONFIG_MHI_BUS=y
> +CONFIG_MHi_UCI=y

CONFIG_MHI_UCI

> diff --git a/tools/testing/selftests/drivers/mhi/loopback_test.c b/tools/testing/selftests/drivers/mhi/loopback_test.c
> new file mode 100644
> index 0000000..99b7712
> --- /dev/null
> +++ b/tools/testing/selftests/drivers/mhi/loopback_test.c
> @@ -0,0 +1,802 @@
> +// SPDX-License-Identifier: GPL-2.0

[...]