| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <MWHPR1001MB23184F3EAFA413E0D1910EC9E8FC0@MWHPR1001MB2318.namprd10.prod.outlook.com>
Date: Mon, 23 Nov 2020 21:40:43 +0000
From: "Ramsay, Lincoln" <Lincoln.Ramsay@...i.com>
To: Jakub Kicinski <kuba@...nel.org>
CC: Florian Westphal <fw@...len.de>,
Igor Russkikh <irusskikh@...vell.com>,
"David S. Miller" <davem@...emloft.net>,
"netdev@...r.kernel.org" <netdev@...r.kernel.org>,
Dmitry Bogdanov <dbogdanov@...vell.com>
Subject: [PATCH net v5] aquantia: Remove the build_skb path
From: Lincoln Ramsay <lincoln.ramsay@...ngear.com>
When performing IPv6 forwarding, there is an expectation that SKBs
will have some headroom. When forwarding a packet from the aquantia
driver, this does not always happen, triggering a kernel warning.
aq_ring.c has this code (edited slightly for brevity):
if (buff->is_eop && buff->len <= AQ_CFG_RX_FRAME_MAX - AQ_SKB_ALIGN) {
skb = build_skb(aq_buf_vaddr(&buff->rxdata), AQ_CFG_RX_FRAME_MAX);
} else {
skb = napi_alloc_skb(napi, AQ_CFG_RX_HDR_SIZE);
There is a significant difference between the SKB produced by these
2 code paths. When napi_alloc_skb creates an SKB, there is a certain
amount of headroom reserved. However, this is not done in the
build_skb codepath.
As the hardware buffer that build_skb is built around does not
handle the presence of the SKB header, this code path is being
removed and the napi_alloc_skb path will always be used. This code
path does have to copy the packet header into the SKB, but it adds
the packet data as a frag.
Fixes: 018423e90bee ("net: ethernet: aquantia: Add ring support code")
Signed-off-by: Lincoln Ramsay <lincoln.ramsay@...ngear.com>
---
.../net/ethernet/aquantia/atlantic/aq_ring.c | 126 ++++++++----------
1 file changed, 52 insertions(+), 74 deletions(-)
diff --git a/drivers/net/ethernet/aquantia/atlantic/aq_ring.c b/drivers/net/ethernet/aquantia/atlantic/aq_ring.c
index 4f913658eea4..24122ccda614 100644
--- a/drivers/net/ethernet/aquantia/atlantic/aq_ring.c
+++ b/drivers/net/ethernet/aquantia/atlantic/aq_ring.c
@@ -413,85 +413,63 @@ int aq_ring_rx_clean(struct aq_ring_s *self,
buff->rxdata.pg_off,
buff->len, DMA_FROM_DEVICE);
- /* for single fragment packets use build_skb() */
- if (buff->is_eop &&
- buff->len <= AQ_CFG_RX_FRAME_MAX - AQ_SKB_ALIGN) {
- skb = build_skb(aq_buf_vaddr(&buff->rxdata),
+ skb = napi_alloc_skb(napi, AQ_CFG_RX_HDR_SIZE);
+ if (unlikely(!skb)) {
+ u64_stats_update_begin(&self->stats.rx.syncp);
+ self->stats.rx.skb_alloc_fails++;
+ u64_stats_update_end(&self->stats.rx.syncp);
+ err = -ENOMEM;
+ goto err_exit;
+ }
+ if (is_ptp_ring)
+ buff->len -=
+ aq_ptp_extract_ts(self->aq_nic, skb,
+ aq_buf_vaddr(&buff->rxdata),
+ buff->len);
+
+ hdr_len = buff->len;
+ if (hdr_len > AQ_CFG_RX_HDR_SIZE)
+ hdr_len = eth_get_headlen(skb->dev,
+ aq_buf_vaddr(&buff->rxdata),
+ AQ_CFG_RX_HDR_SIZE);
+
+ memcpy(__skb_put(skb, hdr_len), aq_buf_vaddr(&buff->rxdata),
+ ALIGN(hdr_len, sizeof(long)));
+
+ if (buff->len - hdr_len > 0) {
+ skb_add_rx_frag(skb, 0, buff->rxdata.page,
+ buff->rxdata.pg_off + hdr_len,
+ buff->len - hdr_len,
AQ_CFG_RX_FRAME_MAX);
- if (unlikely(!skb)) {
- u64_stats_update_begin(&self->stats.rx.syncp);
- self->stats.rx.skb_alloc_fails++;
- u64_stats_update_end(&self->stats.rx.syncp);
- err = -ENOMEM;
- goto err_exit;
- }
- if (is_ptp_ring)
- buff->len -=
- aq_ptp_extract_ts(self->aq_nic, skb,
- aq_buf_vaddr(&buff->rxdata),
- buff->len);
- skb_put(skb, buff->len);
page_ref_inc(buff->rxdata.page);
- } else {
- skb = napi_alloc_skb(napi, AQ_CFG_RX_HDR_SIZE);
- if (unlikely(!skb)) {
- u64_stats_update_begin(&self->stats.rx.syncp);
- self->stats.rx.skb_alloc_fails++;
- u64_stats_update_end(&self->stats.rx.syncp);
- err = -ENOMEM;
- goto err_exit;
- }
- if (is_ptp_ring)
- buff->len -=
- aq_ptp_extract_ts(self->aq_nic, skb,
- aq_buf_vaddr(&buff->rxdata),
- buff->len);
-
- hdr_len = buff->len;
- if (hdr_len > AQ_CFG_RX_HDR_SIZE)
- hdr_len = eth_get_headlen(skb->dev,
- aq_buf_vaddr(&buff->rxdata),
- AQ_CFG_RX_HDR_SIZE);
-
- memcpy(__skb_put(skb, hdr_len), aq_buf_vaddr(&buff->rxdata),
- ALIGN(hdr_len, sizeof(long)));
-
- if (buff->len - hdr_len > 0) {
- skb_add_rx_frag(skb, 0, buff->rxdata.page,
- buff->rxdata.pg_off + hdr_len,
- buff->len - hdr_len,
- AQ_CFG_RX_FRAME_MAX);
- page_ref_inc(buff->rxdata.page);
- }
+ }
- if (!buff->is_eop) {
- buff_ = buff;
- i = 1U;
- do {
- next_ = buff_->next,
- buff_ = &self->buff_ring[next_];
+ if (!buff->is_eop) {
+ buff_ = buff;
+ i = 1U;
+ do {
+ next_ = buff_->next;
+ buff_ = &self->buff_ring[next_];
- dma_sync_single_range_for_cpu(
- aq_nic_get_dev(self->aq_nic),
- buff_->rxdata.daddr,
- buff_->rxdata.pg_off,
- buff_->len,
- DMA_FROM_DEVICE);
- skb_add_rx_frag(skb, i++,
- buff_->rxdata.page,
- buff_->rxdata.pg_off,
- buff_->len,
- AQ_CFG_RX_FRAME_MAX);
- page_ref_inc(buff_->rxdata.page);
- buff_->is_cleaned = 1;
-
- buff->is_ip_cso &= buff_->is_ip_cso;
- buff->is_udp_cso &= buff_->is_udp_cso;
- buff->is_tcp_cso &= buff_->is_tcp_cso;
- buff->is_cso_err |= buff_->is_cso_err;
+ dma_sync_single_range_for_cpu(aq_nic_get_dev(self->aq_nic),
+ buff_->rxdata.daddr,
+ buff_->rxdata.pg_off,
+ buff_->len,
+ DMA_FROM_DEVICE);
+ skb_add_rx_frag(skb, i++,
+ buff_->rxdata.page,
+ buff_->rxdata.pg_off,
+ buff_->len,
+ AQ_CFG_RX_FRAME_MAX);
+ page_ref_inc(buff_->rxdata.page);
+ buff_->is_cleaned = 1;
- } while (!buff_->is_eop);
- }
+ buff->is_ip_cso &= buff_->is_ip_cso;
+ buff->is_udp_cso &= buff_->is_udp_cso;
+ buff->is_tcp_cso &= buff_->is_tcp_cso;
+ buff->is_cso_err |= buff_->is_cso_err;
+
+ } while (!buff_->is_eop);
}
if (buff->is_vlan)
--
2.17.1
Powered by blists - more mailing lists