lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <20201128114555.GA6313@kozik-lap>
Date:   Sat, 28 Nov 2020 12:45:55 +0100
From:   Krzysztof Kozlowski <krzk@...nel.org>
To:     Bongsu Jeon <bongsu.jeon2@...il.com>
Cc:     k.opasiak@...sung.com, linux-nfc@...ts.01.org,
        netdev@...r.kernel.org, linux-kernel@...r.kernel.org,
        Bongsu Jeon <bongsu.jeon@...sung.com>
Subject: Re: [PATCH net-next 3/3] nfc: s3fwrn5: extract the common phy blocks

On Fri, Nov 27, 2020 at 08:09:24AM +0900, Bongsu Jeon wrote:
> On Fri, Nov 27, 2020 at 2:13 AM Krzysztof Kozlowski <krzk@...nel.org> wrote:
> >
> > On Fri, Nov 27, 2020 at 12:33:39AM +0900, bongsu.jeon2@...il.com wrote:
> > > From: Bongsu Jeon <bongsu.jeon@...sung.com>
> > >
> > > Extract the common phy blocks to reuse it.
> > > The UART module will use the common blocks.
> >
> >
> > Hi,
> >
> > Thanks for the patch. Few comments below.
> >
> > > Signed-off-by: Bongsu Jeon <bongsu.jeon@...sung.com>
> > > ---
> > >  drivers/nfc/s3fwrn5/i2c.c        | 111 ++++++++++++---------------------------
> > >  drivers/nfc/s3fwrn5/phy_common.h |  86 ++++++++++++++++++++++++++++++
> > >  2 files changed, 119 insertions(+), 78 deletions(-)
> > >  create mode 100644 drivers/nfc/s3fwrn5/phy_common.h
> > >
> > > diff --git a/drivers/nfc/s3fwrn5/i2c.c b/drivers/nfc/s3fwrn5/i2c.c
> > > index 9a64eea..cd1b2a7 100644
> > > --- a/drivers/nfc/s3fwrn5/i2c.c
> > > +++ b/drivers/nfc/s3fwrn5/i2c.c
> > > @@ -15,75 +15,30 @@
> > >
> > >  #include <net/nfc/nfc.h>
> > >
> > > -#include "s3fwrn5.h"
> > > +#include "phy_common.h"
> > >
> > >  #define S3FWRN5_I2C_DRIVER_NAME "s3fwrn5_i2c"
> > >
> > > -#define S3FWRN5_EN_WAIT_TIME 20
> > > -
> > >  struct s3fwrn5_i2c_phy {
> > > +     struct phy_common common;
> > >       struct i2c_client *i2c_dev;
> > > -     struct nci_dev *ndev;
> > > -
> > > -     int gpio_en;
> > > -     int gpio_fw_wake;
> > > -
> > > -     struct mutex mutex;
> > >
> > > -     enum s3fwrn5_mode mode;
> > >       unsigned int irq_skip:1;
> > >  };
> > >
> > > -static void s3fwrn5_i2c_set_wake(void *phy_id, bool wake)
> > > -{
> > > -     struct s3fwrn5_i2c_phy *phy = phy_id;
> > > -
> > > -     mutex_lock(&phy->mutex);
> > > -     gpio_set_value(phy->gpio_fw_wake, wake);
> > > -     msleep(S3FWRN5_EN_WAIT_TIME);
> > > -     mutex_unlock(&phy->mutex);
> > > -}
> > > -
> > >  static void s3fwrn5_i2c_set_mode(void *phy_id, enum s3fwrn5_mode mode)
> > >  {
> > >       struct s3fwrn5_i2c_phy *phy = phy_id;
> > >
> > > -     mutex_lock(&phy->mutex);
> > > +     mutex_lock(&phy->common.mutex);
> > >
> > > -     if (phy->mode == mode)
> > > +     if (s3fwrn5_phy_power_ctrl(&phy->common, mode) == false)
> > >               goto out;
> > >
> > > -     phy->mode = mode;
> > > -
> > > -     gpio_set_value(phy->gpio_en, 1);
> > > -     gpio_set_value(phy->gpio_fw_wake, 0);
> > > -     if (mode == S3FWRN5_MODE_FW)
> > > -             gpio_set_value(phy->gpio_fw_wake, 1);
> > > -
> > > -     if (mode != S3FWRN5_MODE_COLD) {
> > > -             msleep(S3FWRN5_EN_WAIT_TIME);
> > > -             gpio_set_value(phy->gpio_en, 0);
> > > -             msleep(S3FWRN5_EN_WAIT_TIME);
> > > -     }
> > > -
> > >       phy->irq_skip = true;
> > >
> > >  out:
> > > -     mutex_unlock(&phy->mutex);
> > > -}
> > > -
> > > -static enum s3fwrn5_mode s3fwrn5_i2c_get_mode(void *phy_id)
> > > -{
> > > -     struct s3fwrn5_i2c_phy *phy = phy_id;
> > > -     enum s3fwrn5_mode mode;
> > > -
> > > -     mutex_lock(&phy->mutex);
> > > -
> > > -     mode = phy->mode;
> > > -
> > > -     mutex_unlock(&phy->mutex);
> > > -
> > > -     return mode;
> > > +     mutex_unlock(&phy->common.mutex);
> > >  }
> > >
> > >  static int s3fwrn5_i2c_write(void *phy_id, struct sk_buff *skb)
> > > @@ -91,7 +46,7 @@ static int s3fwrn5_i2c_write(void *phy_id, struct sk_buff *skb)
> > >       struct s3fwrn5_i2c_phy *phy = phy_id;
> > >       int ret;
> > >
> > > -     mutex_lock(&phy->mutex);
> > > +     mutex_lock(&phy->common.mutex);
> > >
> > >       phy->irq_skip = false;
> > >
> > > @@ -102,7 +57,7 @@ static int s3fwrn5_i2c_write(void *phy_id, struct sk_buff *skb)
> > >               ret  = i2c_master_send(phy->i2c_dev, skb->data, skb->len);
> > >       }
> > >
> > > -     mutex_unlock(&phy->mutex);
> > > +     mutex_unlock(&phy->common.mutex);
> > >
> > >       if (ret < 0)
> > >               return ret;
> > > @@ -114,9 +69,9 @@ static int s3fwrn5_i2c_write(void *phy_id, struct sk_buff *skb)
> > >  }
> > >
> > >  static const struct s3fwrn5_phy_ops i2c_phy_ops = {
> > > -     .set_wake = s3fwrn5_i2c_set_wake,
> > > +     .set_wake = s3fwrn5_phy_set_wake,
> > >       .set_mode = s3fwrn5_i2c_set_mode,
> > > -     .get_mode = s3fwrn5_i2c_get_mode,
> > > +     .get_mode = s3fwrn5_phy_get_mode,
> > >       .write = s3fwrn5_i2c_write,
> > >  };
> > >
> > > @@ -128,7 +83,7 @@ static int s3fwrn5_i2c_read(struct s3fwrn5_i2c_phy *phy)
> > >       char hdr[4];
> > >       int ret;
> > >
> > > -     hdr_size = (phy->mode == S3FWRN5_MODE_NCI) ?
> > > +     hdr_size = (phy->common.mode == S3FWRN5_MODE_NCI) ?
> > >               NCI_CTRL_HDR_SIZE : S3FWRN5_FW_HDR_SIZE;
> > >       ret = i2c_master_recv(phy->i2c_dev, hdr, hdr_size);
> > >       if (ret < 0)
> > > @@ -137,7 +92,7 @@ static int s3fwrn5_i2c_read(struct s3fwrn5_i2c_phy *phy)
> > >       if (ret < hdr_size)
> > >               return -EBADMSG;
> > >
> > > -     data_len = (phy->mode == S3FWRN5_MODE_NCI) ?
> > > +     data_len = (phy->common.mode == S3FWRN5_MODE_NCI) ?
> > >               ((struct nci_ctrl_hdr *)hdr)->plen :
> > >               ((struct s3fwrn5_fw_header *)hdr)->len;
> > >
> > > @@ -157,24 +112,24 @@ static int s3fwrn5_i2c_read(struct s3fwrn5_i2c_phy *phy)
> > >       }
> > >
> > >  out:
> > > -     return s3fwrn5_recv_frame(phy->ndev, skb, phy->mode);
> > > +     return s3fwrn5_recv_frame(phy->common.ndev, skb, phy->common.mode);
> > >  }
> > >
> > >  static irqreturn_t s3fwrn5_i2c_irq_thread_fn(int irq, void *phy_id)
> > >  {
> > >       struct s3fwrn5_i2c_phy *phy = phy_id;
> > >
> > > -     if (!phy || !phy->ndev) {
> > > +     if (!phy || !phy->common.ndev) {
> > >               WARN_ON_ONCE(1);
> > >               return IRQ_NONE;
> > >       }
> > >
> > > -     mutex_lock(&phy->mutex);
> > > +     mutex_lock(&phy->common.mutex);
> > >
> > >       if (phy->irq_skip)
> > >               goto out;
> > >
> > > -     switch (phy->mode) {
> > > +     switch (phy->common.mode) {
> > >       case S3FWRN5_MODE_NCI:
> > >       case S3FWRN5_MODE_FW:
> > >               s3fwrn5_i2c_read(phy);
> > > @@ -184,7 +139,7 @@ static irqreturn_t s3fwrn5_i2c_irq_thread_fn(int irq, void *phy_id)
> > >       }
> > >
> > >  out:
> > > -     mutex_unlock(&phy->mutex);
> > > +     mutex_unlock(&phy->common.mutex);
> > >
> > >       return IRQ_HANDLED;
> > >  }
> > > @@ -197,19 +152,19 @@ static int s3fwrn5_i2c_parse_dt(struct i2c_client *client)
> > >       if (!np)
> > >               return -ENODEV;
> > >
> > > -     phy->gpio_en = of_get_named_gpio(np, "en-gpios", 0);
> > > -     if (!gpio_is_valid(phy->gpio_en)) {
> > > +     phy->common.gpio_en = of_get_named_gpio(np, "en-gpios", 0);
> > > +     if (!gpio_is_valid(phy->common.gpio_en)) {
> > >               /* Support also deprecated property */
> > > -             phy->gpio_en = of_get_named_gpio(np, "s3fwrn5,en-gpios", 0);
> > > -             if (!gpio_is_valid(phy->gpio_en))
> > > +             phy->common.gpio_en = of_get_named_gpio(np, "s3fwrn5,en-gpios", 0);
> > > +             if (!gpio_is_valid(phy->common.gpio_en))
> > >                       return -ENODEV;
> > >       }
> > >
> > > -     phy->gpio_fw_wake = of_get_named_gpio(np, "wake-gpios", 0);
> > > -     if (!gpio_is_valid(phy->gpio_fw_wake)) {
> > > +     phy->common.gpio_fw_wake = of_get_named_gpio(np, "wake-gpios", 0);
> > > +     if (!gpio_is_valid(phy->common.gpio_fw_wake)) {
> > >               /* Support also deprecated property */
> > > -             phy->gpio_fw_wake = of_get_named_gpio(np, "s3fwrn5,fw-gpios", 0);
> > > -             if (!gpio_is_valid(phy->gpio_fw_wake))
> > > +             phy->common.gpio_fw_wake = of_get_named_gpio(np, "s3fwrn5,fw-gpios", 0);
> >
> > The lines here should wrap at 80 character.
> >
> > > +             if (!gpio_is_valid(phy->common.gpio_fw_wake))
> > >                       return -ENODEV;
> > >       }
> > >
> > > @@ -226,8 +181,8 @@ static int s3fwrn5_i2c_probe(struct i2c_client *client,
> > >       if (!phy)
> > >               return -ENOMEM;
> > >
> > > -     mutex_init(&phy->mutex);
> > > -     phy->mode = S3FWRN5_MODE_COLD;
> > > +     mutex_init(&phy->common.mutex);
> > > +     phy->common.mode = S3FWRN5_MODE_COLD;
> > >       phy->irq_skip = true;
> > >
> > >       phy->i2c_dev = client;
> > > @@ -237,17 +192,17 @@ static int s3fwrn5_i2c_probe(struct i2c_client *client,
> > >       if (ret < 0)
> > >               return ret;
> > >
> > > -     ret = devm_gpio_request_one(&phy->i2c_dev->dev, phy->gpio_en,
> > > -             GPIOF_OUT_INIT_HIGH, "s3fwrn5_en");
> > > +     ret = devm_gpio_request_one(&phy->i2c_dev->dev, phy->common.gpio_en,
> > > +                                 GPIOF_OUT_INIT_HIGH, "s3fwrn5_en");
> > >       if (ret < 0)
> > >               return ret;
> > >
> > > -     ret = devm_gpio_request_one(&phy->i2c_dev->dev, phy->gpio_fw_wake,
> > > -             GPIOF_OUT_INIT_LOW, "s3fwrn5_fw_wake");
> > > +     ret = devm_gpio_request_one(&phy->i2c_dev->dev, phy->common.gpio_fw_wake,
> > > +                                 GPIOF_OUT_INIT_LOW, "s3fwrn5_fw_wake");
> > >       if (ret < 0)
> > >               return ret;
> > >
> > > -     ret = s3fwrn5_probe(&phy->ndev, phy, &phy->i2c_dev->dev, &i2c_phy_ops);
> > > +     ret = s3fwrn5_probe(&phy->common.ndev, phy, &phy->i2c_dev->dev, &i2c_phy_ops);
> >
> > Please wrap the lines.
> >
> > >       if (ret < 0)
> > >               return ret;
> > >
> > > @@ -255,7 +210,7 @@ static int s3fwrn5_i2c_probe(struct i2c_client *client,
> > >               s3fwrn5_i2c_irq_thread_fn, IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
> > >               S3FWRN5_I2C_DRIVER_NAME, phy);
> > >       if (ret)
> > > -             s3fwrn5_remove(phy->ndev);
> > > +             s3fwrn5_remove(phy->common.ndev);
> > >
> > >       return ret;
> > >  }
> > > @@ -264,7 +219,7 @@ static int s3fwrn5_i2c_remove(struct i2c_client *client)
> > >  {
> > >       struct s3fwrn5_i2c_phy *phy = i2c_get_clientdata(client);
> > >
> > > -     s3fwrn5_remove(phy->ndev);
> > > +     s3fwrn5_remove(phy->common.ndev);
> > >
> > >       return 0;
> > >  }
> > > diff --git a/drivers/nfc/s3fwrn5/phy_common.h b/drivers/nfc/s3fwrn5/phy_common.h
> > > new file mode 100644
> > > index 0000000..14f7690
> > > --- /dev/null
> > > +++ b/drivers/nfc/s3fwrn5/phy_common.h
> > > @@ -0,0 +1,86 @@
> > > +/* SPDX-License-Identifier: GPL-2.0-or-later
> > > + *
> > > + * Link Layer for Samsung S3FWRN5 NCI based Driver
> > > + *
> > > + * Copyright (C) 2015 Samsung Electrnoics
> > > + * Robert Baldyga <r.baldyga@...sung.com>
> > > + * Copyright (C) 2020 Samsung Electrnoics
> > > + * Bongsu Jeon <bongsu.jeon@...sung.com>
> > > + */
> > > +
> > > +#ifndef __LOCAL_PHY_COMMON_H
> > > +#define __LOCAL_PHY_COMMON_H
> >
> > Header guard: __NFC_S3FWRN5_PHY_COMMON_H
> >
> > > +
> > > +#include "s3fwrn5.h"
> >
> > This include should not be needed.
> >
> 
> Actually, I included this because of enum s3fwrn5_mode.
> Do you think the following structure is good?
> 
> 0. remove the '#include "s3fwrn5.h" and the common function's
> definition in phy_common.h.
> 1. make phy_common.c that includes the common function's definition
> and "s3fwrn5.h , phy_common.h".
> 2. i2c.c includes "s3fwrn5.h , phy_common.h".

It looks like you already sent v2... I'll skip answering here then.

Best regards,
Krzysztof

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ