lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20201201184339.GB553169@google.com>
Date:   Tue, 1 Dec 2020 10:43:39 -0800
From:   sdf@...gle.com
To:     Andrey Ignatov <rdna@...com>
Cc:     Alexei Starovoitov <alexei.starovoitov@...il.com>,
        Network Development <netdev@...r.kernel.org>,
        bpf <bpf@...r.kernel.org>,
        "David S. Miller" <davem@...emloft.net>,
        Alexei Starovoitov <ast@...nel.org>,
        Daniel Borkmann <daniel@...earbox.net>
Subject: Re: [PATCH bpf-next 2/3] bpf: allow bpf_{s,g}etsockopt from cgroup
 bind{4,6} hooks

On 11/30, Andrey Ignatov wrote:
> sdf@...gle.com <sdf@...gle.com> [Mon, 2020-11-30 08:38 -0800]:
> > On 11/29, Andrey Ignatov wrote:
> > > Alexei Starovoitov <alexei.starovoitov@...il.com> [Tue, 2020-11-17  
> 20:05
> > > -0800]:
> > > > On Tue, Nov 17, 2020 at 4:17 PM Stanislav Fomichev <sdf@...gle.com>
> > > wrote:
> > [..]
> > > >
> > > > I think it is ok, but I need to go through the locking paths more.
> > > > Andrey,
> > > > please take a look as well.
> >
> > > Sorry for delay, I was offline for the last two weeks.
> > No worries, I was OOO myself last week, thanks for the feedback!
> >
> > >  From the correctness perspective it looks fine to me.
> >
> > >  From the performance perspective I can think of one relevant  
> scenario.
> > > Quite common use-case in applications is to use bind(2) not before
> > > listen(2) but before connect(2) for client sockets so that connection
> > > can be set up from specific source IP and, optionally, port.
> >
> > > Binding to both IP and port case is not interesting since it's already
> > > slow due to get_port().
> >
> > > But some applications do care about connection setup performance and  
> at
> > > the same time need to set source IP only (no port). In this case they
> > > use IP_BIND_ADDRESS_NO_PORT socket option, what makes bind(2) fast
> > > (we've discussed it with Stanislav earlier in [0]).
> >
> > > I can imagine some pathological case when an application sets up tons  
> of
> > > connections with bind(2) before connect(2) for sockets with
> > > IP_BIND_ADDRESS_NO_PORT enabled (that by itself requires setsockopt(2)
> > > though, i.e. socket lock/unlock) and that another lock/unlock to run
> > > bind hook may add some overhead. Though I do not know how critical  
> that
> > > overhead may be and whether it's worth to benchmark or not (maybe too
> > > much paranoia).
> >
> > > [0] https://lore.kernel.org/bpf/20200505182010.GB55644@rdna-mbp/
> > Even in case of IP_BIND_ADDRESS_NO_PORT, inet[6]_bind() does
> > lock_sock down the line, so it's not like we are switching
> > a lockless path to the one with the lock, right?

> Right, I understand that it's going from one lock/unlock to two (not
> from zero to one), that's what I meant by "another". My point was about
> this one more lock.

> > And in this case, similar to listen, the socket is still uncontended and
> > owned by the userspace. So that extra lock/unlock should be cheap
> > enough to be ignored (spin_lock_bh on the warm cache line).
> >
> > Am I missing something?

> As I mentioned it may come up only in "pathological case" what is
> probably fine to ignore, i.e. I'd rather agree with "cheap enough to be
> ignored" and benchmark would likely confirm it, I just couldn't say that
> for sure w/o numbers so brought this point.

> Given that we both agree that it should be fine to ignore this +1 lock,
> IMO it should be good to go unless someone else has objections.
Thanks, agreed. Do you mind giving it an acked-by so it gets some
attention in the patchwork? ;-)

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ