netdev - [PATCH v2 06/11] net: dsa: microchip: ksz8795: use phy_port

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20201201204506.13473-7-m.grzeschik@pengutronix.de>
Date:   Tue,  1 Dec 2020 21:45:01 +0100
From:   Michael Grzeschik <m.grzeschik@...gutronix.de>
To:     netdev@...r.kernel.org
Cc:     andrew@...n.ch, f.fainelli@...il.com, davem@...emloft.net,
        kernel@...gutronix.de, matthias.schiffer@...tq-group.com,
        woojung.huh@...rochip.com, UNGLinuxDriver@...rochip.com
Subject: [PATCH v2 06/11] net: dsa: microchip: ksz8795: use phy_port_cnt where possible

The driver is currently hard coded to SWITCH_PORT_NUM being
(TOTAL_PORT_NUM - 1) which is limited to 4 user ports for the ksz8795.
The phy_port_cnt is referring to its user ports. The patch removes the
extra define and use the assigned variable phy_port_cnt instead so the
driver can be used on different switches.

Reviewed-by: Florian Fainelli <f.fainelli@...il.com>
Signed-off-by: Michael Grzeschik <m.grzeschik@...gutronix.de>

---
v1:       - based on "[PATCH v4 04/11] net: dsa: microchip: ksz8795: use port_cnt where possible"
          - lore: https://lore.kernel.org/netdev/20200803054442.20089-5-m.grzeschik@pengutronix.de/
v1 -> v2: - being more precise in the patch description about its purpose
---
 drivers/net/dsa/microchip/ksz8795.c     | 20 ++++++++++----------
 drivers/net/dsa/microchip/ksz8795_reg.h |  3 ---
 2 files changed, 10 insertions(+), 13 deletions(-)

diff --git a/drivers/net/dsa/microchip/ksz8795.c b/drivers/net/dsa/microchip/ksz8795.c
index abdfc7f4d70ca..ee8e82dda3142 100644
--- a/drivers/net/dsa/microchip/ksz8795.c
+++ b/drivers/net/dsa/microchip/ksz8795.c
@@ -418,8 +418,8 @@ static void ksz8795_r_vlan_entries(struct ksz_device *dev, u16 addr)
 	int i;
 
 	ksz8795_r_table(dev, TABLE_VLAN, addr, &data);
-	addr *= 4;
-	for (i = 0; i < 4; i++) {
+	addr *= dev->phy_port_cnt;
+	for (i = 0; i < dev->phy_port_cnt; i++) {
 		dev->vlan_cache[addr + i].table[0] = (u16)data;
 		data >>= VLAN_TABLE_S;
 	}
@@ -433,7 +433,7 @@ static void ksz8795_r_vlan_table(struct ksz_device *dev, u16 vid, u16 *vlan)
 	u64 buf;
 
 	data = (u16 *)&buf;
-	addr = vid / 4;
+	addr = vid / dev->phy_port_cnt;
 	index = vid & 3;
 	ksz8795_r_table(dev, TABLE_VLAN, addr, &buf);
 	*vlan = data[index];
@@ -447,7 +447,7 @@ static void ksz8795_w_vlan_table(struct ksz_device *dev, u16 vid, u16 vlan)
 	u64 buf;
 
 	data = (u16 *)&buf;
-	addr = vid / 4;
+	addr = vid / dev->phy_port_cnt;
 	index = vid & 3;
 	ksz8795_r_table(dev, TABLE_VLAN, addr, &buf);
 	data[index] = vlan;
@@ -692,12 +692,12 @@ static void ksz8795_port_stp_state_set(struct dsa_switch *ds, int port,
 	switch (state) {
 	case BR_STATE_DISABLED:
 		data |= PORT_LEARN_DISABLE;
-		if (port < SWITCH_PORT_NUM)
+		if (port < dev->phy_port_cnt)
 			member = 0;
 		break;
 	case BR_STATE_LISTENING:
 		data |= (PORT_RX_ENABLE | PORT_LEARN_DISABLE);
-		if (port < SWITCH_PORT_NUM &&
+		if (port < dev->phy_port_cnt &&
 		    p->stp_state == BR_STATE_DISABLED)
 			member = dev->host_mask | p->vid_member;
 		break;
@@ -721,7 +721,7 @@ static void ksz8795_port_stp_state_set(struct dsa_switch *ds, int port,
 		break;
 	case BR_STATE_BLOCKING:
 		data |= PORT_LEARN_DISABLE;
-		if (port < SWITCH_PORT_NUM &&
+		if (port < dev->phy_port_cnt &&
 		    p->stp_state == BR_STATE_DISABLED)
 			member = dev->host_mask | p->vid_member;
 		break;
@@ -1006,7 +1006,7 @@ static void ksz8795_config_cpu_port(struct dsa_switch *ds)
 	ksz8795_port_setup(dev, dev->cpu_port, true);
 	dev->member = dev->host_mask;
 
-	for (i = 0; i < SWITCH_PORT_NUM; i++) {
+	for (i = 0; i < dev->phy_port_cnt; i++) {
 		p = &dev->ports[i];
 
 		/* Initialize to non-zero so that ksz_cfg_port_member() will
@@ -1017,7 +1017,7 @@ static void ksz8795_config_cpu_port(struct dsa_switch *ds)
 		ksz8795_port_stp_state_set(ds, i, BR_STATE_DISABLED);
 
 		/* Last port may be disabled. */
-		if (i == dev->port_cnt)
+		if (i == dev->phy_port_cnt)
 			break;
 		p->on = 1;
 		p->phy = 1;
@@ -1240,7 +1240,7 @@ static int ksz8795_switch_init(struct ksz_device *dev)
 	dev->mib_cnt = ARRAY_SIZE(mib_names);
 
 	dev->mib_port_cnt = TOTAL_PORT_NUM;
-	dev->phy_port_cnt = SWITCH_PORT_NUM;
+	dev->phy_port_cnt = dev->port_cnt;
 
 	dev->cpu_port = dev->mib_port_cnt - 1;
 	dev->host_mask = BIT(dev->cpu_port);
diff --git a/drivers/net/dsa/microchip/ksz8795_reg.h b/drivers/net/dsa/microchip/ksz8795_reg.h
index c131224850135..6377165a236fd 100644
--- a/drivers/net/dsa/microchip/ksz8795_reg.h
+++ b/drivers/net/dsa/microchip/ksz8795_reg.h
@@ -848,9 +848,6 @@
 
 #define TOTAL_PORT_NUM			5
 
-/* Host port can only be last of them. */
-#define SWITCH_PORT_NUM			(TOTAL_PORT_NUM - 1)
-
 #define KSZ8795_COUNTER_NUM		0x20
 
 /* Common names used by other drivers */
-- 
2.29.2