netdev - Re: [PATCH net-next v4 2/4] dt-bindings: net: Add Rx/Tx output configuration for 10base T1L

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20201201000201.GA3293113@robh.at.kernel.org>
Date:   Mon, 30 Nov 2020 17:02:01 -0700
From:   Rob Herring <robh@...nel.org>
To:     Dan Murphy <dmurphy@...com>
Cc:     davem@...emloft.net, andrew@...n.ch, f.fainelli@...il.com,
        hkallweit1@...il.com, ciorneiioana@...il.com,
        devicetree@...r.kernel.org, netdev@...r.kernel.org,
        linux-kernel@...r.kernel.org
Subject: Re: [PATCH net-next v4 2/4] dt-bindings: net: Add Rx/Tx output
 configuration for 10base T1L

On Tue, Nov 17, 2020 at 02:15:53PM -0600, Dan Murphy wrote:
> Per the 802.3cg spec the 10base T1L can operate at 2 different
> differential voltages 1v p2p and 2.4v p2p. The abiility of the PHY to

1.1V?

> drive that output is dependent on the PHY's on board power supply.
> This common feature is applicable to all 10base T1L PHYs so this binding
> property belongs in a top level ethernet document.
> 
> Signed-off-by: Dan Murphy <dmurphy@...com>
> ---
>  Documentation/devicetree/bindings/net/ethernet-phy.yaml | 6 ++++++
>  1 file changed, 6 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/net/ethernet-phy.yaml b/Documentation/devicetree/bindings/net/ethernet-phy.yaml
> index 6dd72faebd89..bda1ce51836b 100644
> --- a/Documentation/devicetree/bindings/net/ethernet-phy.yaml
> +++ b/Documentation/devicetree/bindings/net/ethernet-phy.yaml
> @@ -174,6 +174,12 @@ properties:
>        PHY's that have configurable TX internal delays. If this property is
>        present then the PHY applies the TX delay.
>  
> +  max-tx-rx-p2p-microvolt:
> +    description: |

Don't need '|' if no formatting.

> +      Configures the Tx/Rx p2p differential output voltage for 10base-T1L PHYs.
> +    enum: [ 1100, 2400 ]
> +    default: 2400

Aren't you off by 1000?

> +
>  required:
>    - reg
>  
> -- 
> 2.29.2
>