netdev - [PATCH 2/4] net: stmmac: start phylink instance before stmmac_hw

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20201202085949.3279-4-qiangqing.zhang@nxp.com>
Date:   Wed,  2 Dec 2020 16:59:47 +0800
From:   Joakim Zhang <qiangqing.zhang@....com>
To:     peppe.cavallaro@...com, alexandre.torgue@...com,
        joabreu@...opsys.com
Cc:     davem@...emloft.net, kuba@...nel.org, netdev@...r.kernel.org,
        linux-imx@....com
Subject: [PATCH 2/4] net: stmmac: start phylink instance before stmmac_hw_setup()

From: Fugang Duan <fugang.duan@....com>

Start phylink instance and resume back the PHY to supply
RX clock to MAC before MAC layer initialization by calling
.stmmac_hw_setup(), since DMA reset depends on the RX clock,
otherwise DMA reset cost maximum timeout value then finally
timeout.

Signed-off-by: Fugang Duan <fugang.duan@....com>
Signed-off-by: Joakim Zhang <qiangqing.zhang@....com>
---
 .../net/ethernet/stmicro/stmmac/stmmac_main.c    | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 8c1ac75901ce..107761ef456a 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -5277,6 +5277,14 @@ int stmmac_resume(struct device *dev)
 			return ret;
 	}
 
+	if (!device_may_wakeup(priv->device) || !priv->plat->pmt) {
+		rtnl_lock();
+		phylink_start(priv->phylink);
+		/* We may have called phylink_speed_down before */
+		phylink_speed_up(priv->phylink);
+		rtnl_unlock();
+	}
+
 	rtnl_lock();
 	mutex_lock(&priv->lock);
 
@@ -5295,14 +5303,6 @@ int stmmac_resume(struct device *dev)
 	mutex_unlock(&priv->lock);
 	rtnl_unlock();
 
-	if (!device_may_wakeup(priv->device) || !priv->plat->pmt) {
-		rtnl_lock();
-		phylink_start(priv->phylink);
-		/* We may have called phylink_speed_down before */
-		phylink_speed_up(priv->phylink);
-		rtnl_unlock();
-	}
-
 	phylink_mac_change(priv->phylink, true);
 
 	netif_device_attach(ndev);
-- 
2.17.1