netdev - Re: [PATCH v2 2/2] net: dsa: qca: ar9331: export stats64

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Wed, 2 Dec 2020 14:51:03 +0100
From:   Oleksij Rempel <o.rempel@...gutronix.de>
To:     Vladimir Oltean <olteanv@...il.com>
Cc:     Andrew Lunn <andrew@...n.ch>,
        Florian Fainelli <f.fainelli@...il.com>,
        netdev@...r.kernel.org, Russell King <linux@...linux.org.uk>,
        "David S. Miller" <davem@...emloft.net>,
        Pengutronix Kernel Team <kernel@...gutronix.de>,
        Jakub Kicinski <kuba@...nel.org>, linux-mips@...r.kernel.org,
        Vivien Didelot <vivien.didelot@...il.com>,
        linux-kernel@...r.kernel.org
Subject: Re: [PATCH v2 2/2] net: dsa: qca: ar9331: export stats64

On Wed, Dec 02, 2020 at 03:04:38PM +0200, Vladimir Oltean wrote:
> On Wed, Dec 02, 2020 at 01:07:12PM +0100, Oleksij Rempel wrote:
> > Add stats support for the ar9331 switch.
> > 
> > Signed-off-by: Oleksij Rempel <o.rempel@...gutronix.de>
> > ---
> >  /* Warning: switch reset will reset last AR9331_SW_MDIO_PHY_MODE_PAGE request
> > @@ -422,6 +527,7 @@ static void ar9331_sw_phylink_mac_link_down(struct dsa_switch *ds, int port,
> >  					    phy_interface_t interface)
> >  {
> >  	struct ar9331_sw_priv *priv = (struct ar9331_sw_priv *)ds->priv;
> > +	struct ar9331_sw_port *p = &priv->port[port];
> >  	struct regmap *regmap = priv->regmap;
> >  	int ret;
> >  
> > @@ -429,6 +535,8 @@ static void ar9331_sw_phylink_mac_link_down(struct dsa_switch *ds, int port,
> >  				 AR9331_SW_PORT_STATUS_MAC_MASK, 0);
> >  	if (ret)
> >  		dev_err_ratelimited(priv->dev, "%s: %i\n", __func__, ret);
> > +
> > +	cancel_delayed_work_sync(&p->mib_read);
> 
> Is this sufficient? Do you get a guaranteed .phylink_mac_link_down event
> on unbind? How do you ensure you don't race with the stats worker there?

Currently it works, but you are right, i'll better do this on remove as
well.

> > +static void ar9331_stats_update(struct ar9331_sw_port *port,
> > +				struct rtnl_link_stats64 *stats)
> > +{
> > +	struct ar9331_sw_stats *s = &port->stats;
> > +
> > +	stats->rx_packets = s->rxbroad + s->rxmulti + s->rx64byte +
> > +		s->rx128byte + s->rx256byte + s->rx512byte + s->rx1024byte +
> > +		s->rx1518byte + s->rxmaxbyte;
> > +	stats->tx_packets = s->txbroad + s->txmulti + s->tx64byte +
> > +		s->tx128byte + s->tx256byte + s->tx512byte + s->tx1024byte +
> > +		s->tx1518byte + s->txmaxbyte;
> > +	stats->rx_bytes = s->rxgoodbyte;
> > +	stats->tx_bytes = s->txbyte;
> > +	stats->rx_errors = s->rxfcserr + s->rxalignerr + s->rxrunt +
> > +		s->rxfragment + s->rxoverflow;
> > +	stats->tx_errors = s->txoversize;
> > +	stats->multicast = s->rxmulti;
> > +	stats->collisions = s->txcollision;
> > +	stats->rx_length_errors = s->rxrunt * s->rxfragment + s->rxtoolong;
> 
> Multiplication? Is this right?

no. fixed.

> > +	stats->rx_crc_errors = s->rxfcserr + s->rxalignerr + s->rxfragment;
> > +	stats->rx_frame_errors = s->rxalignerr;
> > +	stats->rx_missed_errors = s->rxoverflow;
> > +	stats->tx_aborted_errors = s->txabortcol;
> > +	stats->tx_fifo_errors = s->txunderrun;
> > +	stats->tx_window_errors = s->txlatecol;
> > +	stats->rx_nohandler = s->filtered;
> > +}
> > +
> > +static void ar9331_do_stats_poll(struct work_struct *work)
> > +{
> > +
> 
> Could you remove this empty line.

fixed

Thank you!

Regards,
Oleksij
-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |