| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20201203102117.8995-8-ceggers@arri.de>
Date: Thu, 3 Dec 2020 11:21:15 +0100
From: Christian Eggers <ceggers@...i.de>
To: Vladimir Oltean <olteanv@...il.com>,
Jakub Kicinski <kuba@...nel.org>, Andrew Lunn <andrew@...n.ch>,
Richard Cochran <richardcochran@...il.com>,
"Rob Herring" <robh+dt@...nel.org>
CC: Vivien Didelot <vivien.didelot@...il.com>,
"David S . Miller" <davem@...emloft.net>,
Kurt Kanzenbach <kurt.kanzenbach@...utronix.de>,
George McCollister <george.mccollister@...il.com>,
Marek Vasut <marex@...x.de>,
Helmut Grohne <helmut.grohne@...enta.de>,
Paul Barker <pbarker@...sulko.com>,
Codrin Ciubotariu <codrin.ciubotariu@...rochip.com>,
Tristram Ha <Tristram.Ha@...rochip.com>,
Woojung Huh <woojung.huh@...rochip.com>,
Microchip Linux Driver Support <UNGLinuxDriver@...rochip.com>,
Christian Eggers <ceggers@...i.de>, <netdev@...r.kernel.org>,
<devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>
Subject: [PATCH net-next v5 7/9] net: dsa: microchip: ksz9477: initial hardware time stamping support
Add control routines required for TX hardware time stamping.
The KSZ9563 only supports one step time stamping
(HWTSTAMP_TX_ONESTEP_P2P), which requires linuxptp-2.0 or later.
Currently, only P2P delay measurement is supported. See patchwork
discussion and comments in ksz9477_ptp_init() for details:
https://patchwork.ozlabs.org/project/netdev/patch/20201019172435.4416-8-ceggers@arri.de/
Signed-off-by: Christian Eggers <ceggers@...i.de>
Reviewed-by: Vladimir Oltean <olteanv@...il.com>
---
Changes in v4:
--------------
- Remove useless case statement
- Reviewed-by: Vladimir Oltean <olteanv@...il.com>
drivers/net/dsa/microchip/ksz9477_main.c | 6 +
drivers/net/dsa/microchip/ksz9477_ptp.c | 186 +++++++++++++++++++++++
drivers/net/dsa/microchip/ksz9477_ptp.h | 21 +++
drivers/net/dsa/microchip/ksz_common.h | 4 +
4 files changed, 217 insertions(+)
diff --git a/drivers/net/dsa/microchip/ksz9477_main.c b/drivers/net/dsa/microchip/ksz9477_main.c
index 2cb33e9beb4c..0ade40bf27c7 100644
--- a/drivers/net/dsa/microchip/ksz9477_main.c
+++ b/drivers/net/dsa/microchip/ksz9477_main.c
@@ -1387,6 +1387,7 @@ static const struct dsa_switch_ops ksz9477_switch_ops = {
.phy_read = ksz9477_phy_read16,
.phy_write = ksz9477_phy_write16,
.phylink_mac_link_down = ksz_mac_link_down,
+ .get_ts_info = ksz9477_ptp_get_ts_info,
.port_enable = ksz_enable_port,
.get_strings = ksz9477_get_strings,
.get_ethtool_stats = ksz_get_ethtool_stats,
@@ -1407,6 +1408,11 @@ static const struct dsa_switch_ops ksz9477_switch_ops = {
.port_mdb_del = ksz9477_port_mdb_del,
.port_mirror_add = ksz9477_port_mirror_add,
.port_mirror_del = ksz9477_port_mirror_del,
+ .port_hwtstamp_get = ksz9477_ptp_port_hwtstamp_get,
+ .port_hwtstamp_set = ksz9477_ptp_port_hwtstamp_set,
+ .port_txtstamp = NULL,
+ /* never defer rx delivery, tstamping is done via tail tagging */
+ .port_rxtstamp = NULL,
};
static u32 ksz9477_get_port_addr(int port, int offset)
diff --git a/drivers/net/dsa/microchip/ksz9477_ptp.c b/drivers/net/dsa/microchip/ksz9477_ptp.c
index 0ffc4504a290..a1ca1923ec0c 100644
--- a/drivers/net/dsa/microchip/ksz9477_ptp.c
+++ b/drivers/net/dsa/microchip/ksz9477_ptp.c
@@ -218,6 +218,18 @@ static int ksz9477_ptp_enable(struct ptp_clock_info *ptp,
return -EOPNOTSUPP;
}
+static long ksz9477_ptp_do_aux_work(struct ptp_clock_info *ptp)
+{
+ struct ksz_device *dev = container_of(ptp, struct ksz_device, ptp_caps);
+ struct timespec64 ts;
+
+ mutex_lock(&dev->ptp_mutex);
+ _ksz9477_ptp_gettime(dev, &ts);
+ mutex_unlock(&dev->ptp_mutex);
+
+ return HZ; /* reschedule in 1 second */
+}
+
static int ksz9477_ptp_start_clock(struct ksz_device *dev)
{
u16 data;
@@ -257,6 +269,54 @@ static int ksz9477_ptp_stop_clock(struct ksz_device *dev)
return ksz_write16(dev, REG_PTP_CLK_CTRL, data);
}
+/* device attributes */
+
+enum ksz9477_ptp_tcmode {
+ KSZ9477_PTP_TCMODE_E2E,
+ KSZ9477_PTP_TCMODE_P2P,
+};
+
+static int ksz9477_ptp_tcmode_set(struct ksz_device *dev,
+ enum ksz9477_ptp_tcmode tcmode)
+{
+ u16 data;
+ int ret;
+
+ ret = ksz_read16(dev, REG_PTP_MSG_CONF1, &data);
+ if (ret)
+ return ret;
+
+ if (tcmode == KSZ9477_PTP_TCMODE_P2P)
+ data |= PTP_TC_P2P;
+ else
+ data &= ~PTP_TC_P2P;
+
+ return ksz_write16(dev, REG_PTP_MSG_CONF1, data);
+}
+
+enum ksz9477_ptp_ocmode {
+ KSZ9477_PTP_OCMODE_SLAVE,
+ KSZ9477_PTP_OCMODE_MASTER,
+};
+
+static int ksz9477_ptp_ocmode_set(struct ksz_device *dev,
+ enum ksz9477_ptp_ocmode ocmode)
+{
+ u16 data;
+ int ret;
+
+ ret = ksz_read16(dev, REG_PTP_MSG_CONF1, &data);
+ if (ret)
+ return ret;
+
+ if (ocmode == KSZ9477_PTP_OCMODE_MASTER)
+ data |= PTP_MASTER;
+ else
+ data &= ~PTP_MASTER;
+
+ return ksz_write16(dev, REG_PTP_MSG_CONF1, data);
+}
+
int ksz9477_ptp_init(struct ksz_device *dev)
{
int ret;
@@ -282,6 +342,7 @@ int ksz9477_ptp_init(struct ksz_device *dev)
dev->ptp_caps.gettime64 = ksz9477_ptp_gettime;
dev->ptp_caps.settime64 = ksz9477_ptp_settime;
dev->ptp_caps.enable = ksz9477_ptp_enable;
+ dev->ptp_caps.do_aux_work = ksz9477_ptp_do_aux_work;
/* Start hardware counter (will overflow after 136 years) */
ret = ksz9477_ptp_start_clock(dev);
@@ -294,8 +355,31 @@ int ksz9477_ptp_init(struct ksz_device *dev)
goto error_stop_clock;
}
+ /* Currently, only P2P delay measurement is supported. Setting ocmode
+ * to slave will work independently of actually being master or slave.
+ * For E2E delay measurement, switching between master and slave would
+ * be required, as the KSZ devices filters out PTP messages depending on
+ * the ocmode setting:
+ * - in slave mode, DelayReq messages are filtered out
+ * - in master mode, Sync messages are filtered out
+ * Currently (and probably also in future) there is no interface in the
+ * kernel which allows switching between master and slave mode. For
+ * this reason, E2E cannot be supported. See patchwork for full
+ * discussion:
+ * https://patchwork.ozlabs.org/project/netdev/patch/20201019172435.4416-8-ceggers@arri.de/
+ */
+ ksz9477_ptp_tcmode_set(dev, KSZ9477_PTP_TCMODE_P2P);
+ ksz9477_ptp_ocmode_set(dev, KSZ9477_PTP_OCMODE_SLAVE);
+
+ /* Schedule cyclic call of ksz_ptp_do_aux_work() */
+ ret = ptp_schedule_worker(dev->ptp_clock, 0);
+ if (ret)
+ goto error_unregister_clock;
+
return 0;
+error_unregister_clock:
+ ptp_clock_unregister(dev->ptp_clock);
error_stop_clock:
ksz9477_ptp_stop_clock(dev);
return ret;
@@ -306,3 +390,105 @@ void ksz9477_ptp_deinit(struct ksz_device *dev)
ptp_clock_unregister(dev->ptp_clock);
ksz9477_ptp_stop_clock(dev);
}
+
+/* DSA PTP operations */
+
+int ksz9477_ptp_get_ts_info(struct dsa_switch *ds, int port,
+ struct ethtool_ts_info *ts)
+{
+ struct ksz_device *dev = ds->priv;
+
+ ts->so_timestamping = SOF_TIMESTAMPING_TX_HARDWARE |
+ SOF_TIMESTAMPING_RX_HARDWARE |
+ SOF_TIMESTAMPING_RAW_HARDWARE;
+
+ ts->phc_index = ptp_clock_index(dev->ptp_clock);
+
+ ts->tx_types = BIT(HWTSTAMP_TX_OFF) |
+ BIT(HWTSTAMP_TX_ONESTEP_P2P);
+
+ ts->rx_filters = BIT(HWTSTAMP_FILTER_NONE) |
+ BIT(HWTSTAMP_FILTER_PTP_V2_L4_EVENT) |
+ BIT(HWTSTAMP_FILTER_PTP_V2_L2_EVENT) |
+ BIT(HWTSTAMP_FILTER_PTP_V2_EVENT);
+
+ return 0;
+}
+
+static int ksz9477_set_hwtstamp_config(struct ksz_device *dev, int port,
+ struct hwtstamp_config *config)
+{
+ struct ksz_port *prt = &dev->ports[port];
+
+ /* reserved for future extensions */
+ if (config->flags)
+ return -EINVAL;
+
+ switch (config->tx_type) {
+ case HWTSTAMP_TX_OFF:
+ prt->hwts_tx_en = false;
+ break;
+ case HWTSTAMP_TX_ONESTEP_P2P:
+ prt->hwts_tx_en = true;
+ break;
+ default:
+ return -ERANGE;
+ }
+
+ switch (config->rx_filter) {
+ case HWTSTAMP_FILTER_NONE:
+ break;
+ case HWTSTAMP_FILTER_PTP_V2_L4_EVENT:
+ case HWTSTAMP_FILTER_PTP_V2_L4_SYNC:
+ config->rx_filter = HWTSTAMP_FILTER_PTP_V2_L4_EVENT;
+ break;
+ case HWTSTAMP_FILTER_PTP_V2_L2_EVENT:
+ case HWTSTAMP_FILTER_PTP_V2_L2_SYNC:
+ config->rx_filter = HWTSTAMP_FILTER_PTP_V2_L2_EVENT;
+ break;
+ case HWTSTAMP_FILTER_PTP_V2_EVENT:
+ case HWTSTAMP_FILTER_PTP_V2_SYNC:
+ config->rx_filter = HWTSTAMP_FILTER_PTP_V2_EVENT;
+ break;
+ default:
+ config->rx_filter = HWTSTAMP_FILTER_NONE;
+ return -ERANGE;
+ }
+
+ return 0;
+}
+
+int ksz9477_ptp_port_hwtstamp_get(struct dsa_switch *ds, int port,
+ struct ifreq *ifr)
+{
+ struct ksz_device *dev = ds->priv;
+ unsigned long bytes_copied;
+
+ bytes_copied = copy_to_user(ifr->ifr_data,
+ &dev->ports[port].tstamp_config,
+ sizeof(dev->ports[port].tstamp_config));
+
+ return bytes_copied ? -EFAULT : 0;
+}
+
+int ksz9477_ptp_port_hwtstamp_set(struct dsa_switch *ds, int port,
+ struct ifreq *ifr)
+{
+ struct ksz_device *dev = ds->priv;
+ struct hwtstamp_config config;
+ unsigned long bytes_copied;
+ int err;
+
+ if (copy_from_user(&config, ifr->ifr_data, sizeof(config)))
+ return -EFAULT;
+
+ err = ksz9477_set_hwtstamp_config(dev, port, &config);
+ if (err)
+ return err;
+
+ /* Save the chosen configuration to be returned later. */
+ memcpy(&dev->ports[port].tstamp_config, &config, sizeof(config));
+ bytes_copied = copy_to_user(ifr->ifr_data, &config, sizeof(config));
+
+ return bytes_copied ? -EFAULT : 0;
+}
diff --git a/drivers/net/dsa/microchip/ksz9477_ptp.h b/drivers/net/dsa/microchip/ksz9477_ptp.h
index 0076538419fa..b599401812ae 100644
--- a/drivers/net/dsa/microchip/ksz9477_ptp.h
+++ b/drivers/net/dsa/microchip/ksz9477_ptp.h
@@ -10,6 +10,8 @@
#ifndef DRIVERS_NET_DSA_MICROCHIP_KSZ9477_PTP_H_
#define DRIVERS_NET_DSA_MICROCHIP_KSZ9477_PTP_H_
+#include <linux/types.h>
+
#include "ksz_common.h"
#if IS_ENABLED(CONFIG_NET_DSA_MICROCHIP_KSZ9477_PTP)
@@ -17,11 +19,30 @@
int ksz9477_ptp_init(struct ksz_device *dev);
void ksz9477_ptp_deinit(struct ksz_device *dev);
+int ksz9477_ptp_get_ts_info(struct dsa_switch *ds, int port,
+ struct ethtool_ts_info *ts);
+int ksz9477_ptp_port_hwtstamp_get(struct dsa_switch *ds, int port,
+ struct ifreq *ifr);
+int ksz9477_ptp_port_hwtstamp_set(struct dsa_switch *ds, int port,
+ struct ifreq *ifr);
+
#else
static inline int ksz9477_ptp_init(struct ksz_device *dev) { return 0; }
static inline void ksz9477_ptp_deinit(struct ksz_device *dev) {}
+static inline int ksz9477_ptp_get_ts_info(struct dsa_switch *ds, int port,
+ struct ethtool_ts_info *ts)
+{ return -EOPNOTSUPP; }
+
+static inline int ksz9477_ptp_port_hwtstamp_get(struct dsa_switch *ds, int port,
+ struct ifreq *ifr)
+{ return -EOPNOTSUPP; }
+
+static inline int ksz9477_ptp_port_hwtstamp_set(struct dsa_switch *ds, int port,
+ struct ifreq *ifr)
+{ return -EOPNOTSUPP; }
+
#endif
#endif /* DRIVERS_NET_DSA_MICROCHIP_KSZ9477_PTP_H_ */
diff --git a/drivers/net/dsa/microchip/ksz_common.h b/drivers/net/dsa/microchip/ksz_common.h
index f70a45c591d8..e1235d854977 100644
--- a/drivers/net/dsa/microchip/ksz_common.h
+++ b/drivers/net/dsa/microchip/ksz_common.h
@@ -41,6 +41,10 @@ struct ksz_port {
struct ksz_port_mib mib;
phy_interface_t interface;
+#if IS_ENABLED(CONFIG_NET_DSA_MICROCHIP_KSZ9477_PTP)
+ struct hwtstamp_config tstamp_config;
+ bool hwts_tx_en;
+#endif
};
struct ksz_device {
--
Christian Eggers
Embedded software developer
Arnold & Richter Cine Technik GmbH & Co. Betriebs KG
Sitz: Muenchen - Registergericht: Amtsgericht Muenchen - Handelsregisternummer: HRA 57918
Persoenlich haftender Gesellschafter: Arnold & Richter Cine Technik GmbH
Sitz: Muenchen - Registergericht: Amtsgericht Muenchen - Handelsregisternummer: HRB 54477
Geschaeftsfuehrer: Dr. Michael Neuhaeuser; Stephan Schenk; Walter Trauninger; Markus Zeiler
Powered by blists - more mailing lists