[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20201204024638.31351-5-qiangqing.zhang@nxp.com>
Date: Fri, 4 Dec 2020 10:46:37 +0800
From: Joakim Zhang <qiangqing.zhang@....com>
To: peppe.cavallaro@...com, alexandre.torgue@...com,
joabreu@...opsys.com, davem@...emloft.net, kuba@...nel.org
Cc: netdev@...r.kernel.org, linux-imx@....com
Subject: [PATCH V2 4/5] net: stmmac: delete the eee_ctrl_timer after napi disabled
From: Fugang Duan <fugang.duan@....com>
There have chance to re-enable the eee_ctrl_timer and fire the timer
in napi callback after delete the timer in .stmmac_release(), which
introduces to access eee registers in the timer function after clocks
are disabled then causes system hang. Found this issue when do
suspend/resume and reboot stress test.
It is safe to delete the timer after napi disabled and disable lpi mode.
Fixes: d765955d2ae0b ("stmmac: add the Energy Efficient Ethernet support")
Signed-off-by: Fugang Duan <fugang.duan@....com>
Signed-off-by: Joakim Zhang <qiangqing.zhang@....com>
---
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 13 ++++++++++---
1 file changed, 10 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 53c5d77eba57..03c6995d276a 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -2938,9 +2938,6 @@ static int stmmac_release(struct net_device *dev)
struct stmmac_priv *priv = netdev_priv(dev);
u32 chan;
- if (priv->eee_enabled)
- del_timer_sync(&priv->eee_ctrl_timer);
-
if (device_may_wakeup(priv->device))
phylink_speed_down(priv->phylink, false);
/* Stop and disconnect the PHY */
@@ -2959,6 +2956,11 @@ static int stmmac_release(struct net_device *dev)
if (priv->lpi_irq > 0)
free_irq(priv->lpi_irq, dev);
+ if (priv->eee_enabled) {
+ priv->tx_path_in_lpi_mode = false;
+ del_timer_sync(&priv->eee_ctrl_timer);
+ }
+
/* Stop TX/RX DMA and clear the descriptors */
stmmac_stop_all_dma(priv);
@@ -5185,6 +5187,11 @@ int stmmac_suspend(struct device *dev)
for (chan = 0; chan < priv->plat->tx_queues_to_use; chan++)
hrtimer_cancel(&priv->tx_queue[chan].txtimer);
+ if (priv->eee_enabled) {
+ priv->tx_path_in_lpi_mode = false;
+ del_timer_sync(&priv->eee_ctrl_timer);
+ }
+
/* Stop TX/RX DMA */
stmmac_stop_all_dma(priv);
--
2.17.1
Powered by blists - more mailing lists