lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20201207105141.12550-3-qiangqing.zhang@nxp.com>
Date:   Mon,  7 Dec 2020 18:51:38 +0800
From:   Joakim Zhang <qiangqing.zhang@....com>
To:     peppe.cavallaro@...com, alexandre.torgue@...com,
        joabreu@...opsys.com, davem@...emloft.net, kuba@...nel.org
Cc:     netdev@...r.kernel.org, linux-imx@....com
Subject: [PATCH V3 2/5] net: stmmac: start phylink instance before stmmac_hw_setup()

From: Fugang Duan <fugang.duan@....com>

Start phylink instance and resume back the PHY to supply
RX clock to MAC before MAC layer initialization by calling
.stmmac_hw_setup(), since DMA reset depends on the RX clock,
otherwise DMA reset cost maximum timeout value then finally
timeout.

Fixes: 74371272f97f ("net: stmmac: Convert to phylink and remove phylib logic")
Signed-off-by: Fugang Duan <fugang.duan@....com>
Signed-off-by: Joakim Zhang <qiangqing.zhang@....com>
---
 .../net/ethernet/stmicro/stmmac/stmmac_main.c    | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index ba45fe237512..0cef414f1289 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -5247,6 +5247,14 @@ int stmmac_resume(struct device *dev)
 			return ret;
 	}
 
+	if (!device_may_wakeup(priv->device) || !priv->plat->pmt) {
+		rtnl_lock();
+		phylink_start(priv->phylink);
+		/* We may have called phylink_speed_down before */
+		phylink_speed_up(priv->phylink);
+		rtnl_unlock();
+	}
+
 	rtnl_lock();
 	mutex_lock(&priv->lock);
 
@@ -5265,14 +5273,6 @@ int stmmac_resume(struct device *dev)
 	mutex_unlock(&priv->lock);
 	rtnl_unlock();
 
-	if (!device_may_wakeup(priv->device) || !priv->plat->pmt) {
-		rtnl_lock();
-		phylink_start(priv->phylink);
-		/* We may have called phylink_speed_down before */
-		phylink_speed_up(priv->phylink);
-		rtnl_unlock();
-	}
-
 	phylink_mac_change(priv->phylink, true);
 
 	netif_device_attach(ndev);
-- 
2.17.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ