netdev - [PATCH v2 net-next 0/2] nfc: s3fwrn5: Change I2C interrupt trigger to EDGE

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20201208141012.6033-1-bongsu.jeon@samsung.com>
Date:   Tue,  8 Dec 2020 23:10:10 +0900
From:   Bongsu Jeon <bongsu.jeon2@...il.com>
To:     krzk@...nel.org
Cc:     linux-nfc@...ts.01.org, netdev@...r.kernel.org,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
        Bongsu Jeon <bongsu.jeon@...sung.com>
Subject: [PATCH v2 net-next 0/2] nfc: s3fwrn5: Change I2C interrupt trigger to EDGE_RISING

From: Bongsu Jeon <bongsu.jeon@...sung.com>

For stable Samsung's I2C interrupt handling, I changed the interrupt 
trigger from IRQ_TYPE_LEVEL_HIGH to IRQ_TYPE_EDGE_RISING and removed 
the hard coded interrupt trigger type in the i2c module for the flexible 
control.

1/2 is the changed dt binding for the edge rising trigger.
2/2 is to remove the hard coded interrupt trigger type in the i2c module.

ChangeLog:
 v2:
  2/2
   - remove the hard coded interrupt trigger type.

Bongsu Jeon (2):
  dt-bindings: net: nfc: s3fwrn5: Change I2C interrupt trigger to
    EDGE_RISING
  nfc: s3fwrn5: Remove hard coded interrupt trigger type from the i2c
    module

 .../devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml      | 2 +-
 drivers/nfc/s3fwrn5/i2c.c                                 | 8 +++++++-
 2 files changed, 8 insertions(+), 2 deletions(-)

-- 
2.17.1