| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20201209072934.1272819-15-saeed@kernel.org>
Date: Tue, 8 Dec 2020 23:29:34 -0800
From: saeed@...nel.org
To: "David S. Miller" <davem@...emloft.net>,
Jakub Kicinski <kuba@...nel.org>,
Jason Gunthorpe <jgg@...dia.com>
Cc: Leon Romanovsky <leonro@...dia.com>, netdev@...r.kernel.org,
linux-rdma@...r.kernel.org, David Ahern <dsahern@...nel.org>,
Jacob Keller <jacob.e.keller@...el.com>,
Sridhar Samudrala <sridhar.samudrala@...el.com>,
david.m.ertman@...el.com, dan.j.williams@...el.com,
kiran.patil@...el.com, gregkh@...uxfoundation.org,
Parav Pandit <parav@...dia.com>,
Saeed Mahameed <saeedm@...dia.com>
Subject: [PATCH net-next v2 14/14] net/mlx5: Add devlink subfunction port documentation
From: Parav Pandit <parav@...dia.com>
Add documentation for subfunction management using devlink
port.
Signed-off-by: Parav Pandit <parav@...dia.com>
Signed-off-by: Saeed Mahameed <saeedm@...dia.com>
---
Changelog:
v1->v2:
- new patch
---
.../device_drivers/ethernet/mellanox/mlx5.rst | 204 ++++++++++++++++++
1 file changed, 204 insertions(+)
diff --git a/Documentation/networking/device_drivers/ethernet/mellanox/mlx5.rst b/Documentation/networking/device_drivers/ethernet/mellanox/mlx5.rst
index a5eb22793bb9..07e38c044355 100644
--- a/Documentation/networking/device_drivers/ethernet/mellanox/mlx5.rst
+++ b/Documentation/networking/device_drivers/ethernet/mellanox/mlx5.rst
@@ -12,6 +12,8 @@ Contents
- `Enabling the driver and kconfig options`_
- `Devlink info`_
- `Devlink parameters`_
+- `mlx5 subfunction`_
+- `mlx5 port function`_
- `Devlink health reporters`_
- `mlx5 tracepoints`_
@@ -181,6 +183,208 @@ User command examples:
values:
cmode driverinit value true
+mlx5 subfunction
+================
+mlx5 supports subfunctions management using devlink port (see :ref:`Documentation/networking/devlink/devlink-port.rst <devlink_port>`) interface.
+
+A Subfunction has its own function capabilities and its own resources. This
+means a subfunction has its own dedicated queues(txq, rxq, cq, eq). These queues
+are neither shared nor stealed from the parent PCI function.
+
+When subfunction is RDMA capable, it has its own QP1, GID table and rdma
+resources neither shared nor stealed from the parent PCI function.
+
+A subfunction has dedicated window in PCI BAR space that is not shared
+with ther other subfunctions or parent PCI function. This ensures that all
+class devices of the subfunction accesses only assigned PCI BAR space.
+
+A Subfunction supports eswitch representation through which it supports tc
+offloads. User must configure eswitch to send/receive packets from/to
+subfunction port.
+
+Subfunctions share PCI level resources such as PCI MSI-X IRQs with
+ther other subfunctions and/or with its parent PCI function.
+
+Example mlx5 software, system and device view::
+
+ _______
+ | admin |
+ | user |----------
+ |_______| |
+ | |
+ ____|____ __|______ _________________
+ | | | | | |
+ | devlink | | tc tool | | user |
+ | tool | |_________| | applications |
+ |_________| | |_________________|
+ | | | |
+ | | | | Userspace
+ +---------|-------------|-------------------|----------|--------------------+
+ | | +----------+ +----------+ Kernel
+ | | | netdev | | rdma dev |
+ | | +----------+ +----------+
+ (devlink port add/del | ^ ^
+ port function set) | | |
+ | | +---------------|
+ _____|___ | | _______|_______
+ | | | | | mlx5 class |
+ | devlink | +------------+ | | drivers |
+ | kernel | | rep netdev | | |(mlx5_core,ib) |
+ |_________| +------------+ | |_______________|
+ | | | ^
+ (devlink ops) | | (probe/remove)
+ _________|________ | | ____|________
+ | subfunction | | +---------------+ | subfunction |
+ | management driver|----- | subfunction |---| driver |
+ | (mlx5_core) | | auxiliary dev | | (mlx5_core) |
+ |__________________| +---------------+ |_____________|
+ | ^
+ (sf add/del, vhca events) |
+ | (device add/del)
+ _____|____ ____|________
+ | | | subfunction |
+ | PCI NIC |---- activate/deactive events---->| host driver |
+ |__________| | (mlx5_core) |
+ |_____________|
+
+Subfunction is created using devlink port interface.
+
+- Change device to switchdev mode::
+
+ $ devlink dev eswitch set pci/0000:06:00.0 mode switchdev
+
+- Add a devlink port of subfunction flaovur::
+
+ $ devlink port add pci/0000:06:00.0 flavour pcisf pfnum 0 sfnum 88
+
+- Show a devlink port of the subfunction::
+
+ $ devlink port show pci/0000:06:00.0/32768
+ pci/0000:06:00.0/32768: type eth netdev enp6s0pf0sf88 flavour pcisf pfnum 0 sfnum 88
+ function:
+ hw_addr 00:00:00:00:00:00
+
+- Delete a devlink port of subfunction after use::
+
+ $ devlink port del pci/0000:06:00.0 flavour pcisf pfnum 0 sfnum 88
+
+mlx5 port function
+==================
+mlx5 driver provides mechanism to setup PCI VF/SF port function
+attributes in unified way for smartnic and non-smartnic NICs.
+
+This is supported only when eswitch mode is set to switchdev. Port function
+configuration of the PCI VF/SF is supported through devlink eswitch port.
+
+Port function attributes should be set before PCI VF/SF is enumerated by the
+driver.
+
+MAC address setup
+-----------------
+mlx5 driver provides mechanism to setup the MAC address of the PCI VF/SF.
+
+Configured MAC address of the PCI VF/SF will be used by netdevice and rdma
+device created for the PCI VF/SF.
+
+- Get MAC address of the VF identified by its unique devlink port index::
+
+ $ devlink port show pci/0000:06:00.0/2
+ pci/0000:06:00.0/2: type eth netdev enp6s0pf0vf1 flavour pcivf pfnum 0 vfnum 1
+ function:
+ hw_addr 00:00:00:00:00:00
+
+- Set MAC address of the VF identified by its unique devlink port index::
+
+ $ devlink port function set pci/0000:06:00.0/2 hw_addr 00:11:22:33:44:55
+
+ $ devlink port show pci/0000:06:00.0/2
+ pci/0000:06:00.0/2: type eth netdev enp6s0pf0vf1 flavour pcivf pfnum 0 vfnum 1
+ function:
+ hw_addr 00:11:22:33:44:55
+
+- Get MAC address of the SF identified by its unique devlink port index::
+
+ $ devlink port show pci/0000:06:00.0/32768
+ pci/0000:06:00.0/32768: type eth netdev enp6s0pf0sf88 flavour pcisf pfnum 0 sfnum 88
+ function:
+ hw_addr 00:00:00:00:00:00
+
+- Set MAC address of the VF identified by its unique devlink port index::
+
+ $ devlink port function set pci/0000:06:00.0/32768 hw_addr 00:00:00:00:88:88
+
+ $ devlink port show pci/0000:06:00.0/32768
+ pci/0000:06:00.0/32768: type eth netdev enp6s0pf0sf88 flavour pcivf pfnum 0 sfnum 88
+ function:
+ hw_addr 00:00:00:00:88:88
+
+SF state setup
+--------------
+To use the SF, user must active the SF using SF port function state attribute.
+
+- Get state of the SF identified by its unique devlink port index::
+
+ $ devlink port show ens2f0npf0sf88
+ pci/0000:06:00.0/32768: type eth netdev ens2f0npf0sf88 flavour pcisf controller 0 pfnum 0 sfnum 88 external false splittable false
+ function:
+ hw_addr 00:00:00:00:88:88 state inactive opstate detached
+
+- Activate the function and verify its state is active::
+
+ $ devlink port function set ens2f0npf0sf88 state active
+
+ $ devlink port show ens2f0npf0sf88
+ pci/0000:06:00.0/32768: type eth netdev ens2f0npf0sf88 flavour pcisf controller 0 pfnum 0 sfnum 88 external false splittable false
+ function:
+ hw_addr 00:00:00:00:88:88 state active opstate detached
+
+Upon function activation, PF driver instance gets the event from the device that
+particular SF was activated. It's the cue to put the device on bus, probe it and
+instantiate devlink instance and class specific auxiliary devices for it.
+
+- Show the auxiliary device and port of the subfunction::
+
+ $ devlink dev show
+ devlink dev show auxiliary/mlx5_core.sf.4
+
+ $ devlink port show auxiliary/mlx5_core.sf.4/1
+ auxiliary/mlx5_core.sf.4/1: type eth netdev p0sf88 flavour virtual port 0 splittable false
+
+ $ rdma link show mlx5_0/1
+ link mlx5_0/1 state ACTIVE physical_state LINK_UP netdev p0sf88
+
+ $ rdma dev show
+ 8: rocep6s0f1: node_type ca fw 16.29.0550 node_guid 248a:0703:00b3:d113 sys_image_guid 248a:0703:00b3:d112
+ 13: mlx5_0: node_type ca fw 16.29.0550 node_guid 0000:00ff:fe00:8888 sys_image_guid 248a:0703:00b3:d112
+
+- Subfunction auxilary device and class device hierarchy::
+
+ mlx5_core.sf.4
+ (subfunction auxilary device)
+ /\
+ / \
+ / \
+ / \
+ / \
+ mlx5_core.eth.4 mlx5_core.rdma.4
+ (sf eth aux dev) (sf rdma aux dev)
+ | |
+ | |
+ p0sf88 mlx5_0
+ (sf netdev) (sf rdma device)
+
+Additionally SF port also gets the event when the driver attaches to the
+auxiliary device of the subfunction. This results in changing the operational
+state of the function. This provides visiblity to user to decide when it is
+safe to delete the SF port for graceful termination of the subfunction.
+
+- Show the SF port operational state::
+
+ $ devlink port show ens2f0npf0sf88
+ pci/0000:06:00.0/32768: type eth netdev ens2f0npf0sf88 flavour pcisf controller 0 pfnum 0 sfnum 88 external false splittable false
+ function:
+ hw_addr 00:00:00:00:88:88 state active opstate attached
+
Devlink health reporters
========================
--
2.26.2
Powered by blists - more mailing lists