netdev - [PATCH net-next 02/15] mlxsw: reg: Add Router XLT Enable Register

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20201211170413.2269479-3-idosch@idosch.org>
Date:   Fri, 11 Dec 2020 19:04:00 +0200
From:   Ido Schimmel <idosch@...sch.org>
To:     netdev@...r.kernel.org
Cc:     davem@...emloft.net, kuba@...nel.org, jiri@...dia.com,
        mlxsw@...dia.com, Ido Schimmel <idosch@...dia.com>
Subject: [PATCH net-next 02/15] mlxsw: reg: Add Router XLT Enable Register

From: Jiri Pirko <jiri@...dia.com>

The RXLTE enables XLT (eXtended Lookup Table) LPM lookups if a capable
XM is present on the system.

Signed-off-by: Jiri Pirko <jiri@...dia.com>
Signed-off-by: Ido Schimmel <idosch@...dia.com>
---
 drivers/net/ethernet/mellanox/mlxsw/reg.h | 44 +++++++++++++++++++++++
 1 file changed, 44 insertions(+)

diff --git a/drivers/net/ethernet/mellanox/mlxsw/reg.h b/drivers/net/ethernet/mellanox/mlxsw/reg.h
index e7979edadf4c..ebde4fc860e2 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/reg.h
+++ b/drivers/net/ethernet/mellanox/mlxsw/reg.h
@@ -8469,6 +8469,49 @@ mlxsw_reg_rmft2_ipv6_pack(char *payload, bool v, u16 offset, u16 virtual_router,
 	mlxsw_reg_rmft2_sip6_mask_memcpy_to(payload, (void *)&sip6_mask);
 }
 
+/* RXLTE - Router XLT Enable Register
+ * ----------------------------------
+ * The RXLTE enables XLT (eXtended Lookup Table) LPM lookups if a capable
+ * XM is present on the system.
+ */
+
+#define MLXSW_REG_RXLTE_ID 0x8050
+#define MLXSW_REG_RXLTE_LEN 0x0C
+
+MLXSW_REG_DEFINE(rxlte, MLXSW_REG_RXLTE_ID, MLXSW_REG_RXLTE_LEN);
+
+/* reg_rxlte_virtual_router
+ * Virtual router ID associated with the router interface.
+ * Range is 0..cap_max_virtual_routers-1
+ * Access: Index
+ */
+MLXSW_ITEM32(reg, rxlte, virtual_router, 0x00, 0, 16);
+
+enum mlxsw_reg_rxlte_protocol {
+	MLXSW_REG_RXLTE_PROTOCOL_IPV4,
+	MLXSW_REG_RXLTE_PROTOCOL_IPV6,
+};
+
+/* reg_rxlte_protocol
+ * Access: Index
+ */
+MLXSW_ITEM32(reg, rxlte, protocol, 0x04, 0, 4);
+
+/* reg_rxlte_lpm_xlt_en
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, rxlte, lpm_xlt_en, 0x08, 0, 1);
+
+static inline void mlxsw_reg_rxlte_pack(char *payload, u16 virtual_router,
+					enum mlxsw_reg_rxlte_protocol protocol,
+					bool lpm_xlt_en)
+{
+	MLXSW_REG_ZERO(rxlte, payload);
+	mlxsw_reg_rxlte_virtual_router_set(payload, virtual_router);
+	mlxsw_reg_rxlte_protocol_set(payload, protocol);
+	mlxsw_reg_rxlte_lpm_xlt_en_set(payload, lpm_xlt_en);
+}
+
 /* Note that XMDR and XRALXX register positions violate the rule of ordering
  * register definitions by the ID. However, XRALXX pack helpers are
  * using RALXX pack helpers, RALXX registers have higher IDs.
@@ -11754,6 +11797,7 @@ static const struct mlxsw_reg_info *mlxsw_reg_infos[] = {
 	MLXSW_REG(rigr2),
 	MLXSW_REG(recr2),
 	MLXSW_REG(rmft2),
+	MLXSW_REG(rxlte),
 	MLXSW_REG(xmdr),
 	MLXSW_REG(xralta),
 	MLXSW_REG(xralst),
-- 
2.29.2