[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20201214091616.13545-21-Sergey.Semin@baikalelectronics.ru>
Date: Mon, 14 Dec 2020 12:16:10 +0300
From: Serge Semin <Sergey.Semin@...kalelectronics.ru>
To: Rob Herring <robh+dt@...nel.org>,
Giuseppe Cavallaro <peppe.cavallaro@...com>,
Alexandre Torgue <alexandre.torgue@...com>,
Jose Abreu <joabreu@...opsys.com>,
"David S. Miller" <davem@...emloft.net>,
Jakub Kicinski <kuba@...nel.org>,
Johan Hovold <johan@...nel.org>,
Maxime Ripard <mripard@...nel.org>,
Joao Pinto <jpinto@...opsys.com>,
Lars Persson <larper@...s.com>,
Maxime Coquelin <mcoquelin.stm32@...il.com>
CC: Serge Semin <Sergey.Semin@...kalelectronics.ru>,
Serge Semin <fancer.lancer@...il.com>,
Alexey Malahov <Alexey.Malahov@...kalelectronics.ru>,
Pavel Parkhomenko <Pavel.Parkhomenko@...kalelectronics.ru>,
Vyacheslav Mitrofanov
<Vyacheslav.Mitrofanov@...kalelectronics.ru>,
<netdev@...r.kernel.org>,
<linux-stm32@...md-mailman.stormreply.com>,
<linux-arm-kernel@...ts.infradead.org>,
<devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>
Subject: [PATCH 20/25] net: stmmac: Add Tx/Rx platform clocks support
Depending on the DW *MAC configuration it can be at least connected to an
external Transmit clock, but in some cases to an external Receive clock
generator. In order to simplify/unify the sub-drivers code and to prevent
having the same clocks named differently add the Tx/Rx clocks support to
the generic STMMAC DT-based platform data initialization method under the
names "tx" and "rx" respectively. The bindings schema has already been
altered in accordance with that.
Signed-off-by: Serge Semin <Sergey.Semin@...kalelectronics.ru>
---
.../ethernet/stmicro/stmmac/stmmac_platform.c | 24 +++++++++++++++++++
include/linux/stmmac.h | 2 ++
2 files changed, 26 insertions(+)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
index 38e8836861c4..943498d57e3a 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
@@ -588,6 +588,24 @@ stmmac_probe_config_dt(struct platform_device *pdev, const char **mac)
clk_prepare_enable(plat->pclk);
+ plat->tx_clk = devm_clk_get_optional(&pdev->dev, "tx");
+ if (IS_ERR(plat->tx_clk)) {
+ rc = PTR_ERR(plat->tx_clk);
+ dev_err_probe(&pdev->dev, rc, "Cannot get Tx clock\n");
+ goto error_tx_clk_get;
+ }
+
+ clk_prepare_enable(plat->tx_clk);
+
+ plat->rx_clk = devm_clk_get_optional(&pdev->dev, "rx");
+ if (IS_ERR(plat->rx_clk)) {
+ rc = PTR_ERR(plat->rx_clk);
+ dev_err_probe(&pdev->dev, rc, "Cannot get Rx clock\n");
+ goto error_rx_clk_get;
+ }
+
+ clk_prepare_enable(plat->rx_clk);
+
/* Fall-back to main clock in case of no PTP ref is passed */
plat->clk_ptp_ref = devm_clk_get_optional(&pdev->dev, "ptp_ref");
if (IS_ERR(plat->clk_ptp_ref)) {
@@ -613,6 +631,10 @@ stmmac_probe_config_dt(struct platform_device *pdev, const char **mac)
return plat;
error_hw_init:
+ clk_disable_unprepare(plat->rx_clk);
+error_rx_clk_get:
+ clk_disable_unprepare(plat->tx_clk);
+error_tx_clk_get:
clk_disable_unprepare(plat->pclk);
error_pclk_get:
clk_disable_unprepare(plat->stmmac_clk);
@@ -634,6 +656,8 @@ stmmac_probe_config_dt(struct platform_device *pdev, const char **mac)
void stmmac_remove_config_dt(struct platform_device *pdev,
struct plat_stmmacenet_data *plat)
{
+ clk_disable_unprepare(plat->rx_clk);
+ clk_disable_unprepare(plat->tx_clk);
clk_disable_unprepare(plat->pclk);
clk_disable_unprepare(plat->stmmac_clk);
of_node_put(plat->phy_node);
diff --git a/include/linux/stmmac.h b/include/linux/stmmac.h
index 628e28903b8b..b75cf13d088c 100644
--- a/include/linux/stmmac.h
+++ b/include/linux/stmmac.h
@@ -185,6 +185,8 @@ struct plat_stmmacenet_data {
void *bsp_priv;
struct clk *stmmac_clk;
struct clk *pclk;
+ struct clk *tx_clk;
+ struct clk *rx_clk;
struct clk *clk_ptp_ref;
unsigned int clk_ptp_rate;
unsigned int clk_ref_rate;
--
2.29.2
Powered by blists - more mailing lists