[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20201215160352.GJ1781038@piout.net>
Date: Tue, 15 Dec 2020 17:03:52 +0100
From: Alexandre Belloni <alexandre.belloni@...tlin.com>
To: Vladimir Oltean <vladimir.oltean@....com>
Cc: Tobias Waldekranz <tobias@...dekranz.com>,
"David S . Miller" <davem@...emloft.net>,
Jakub Kicinski <kuba@...nel.org>, netdev@...r.kernel.org,
UNGLinuxDriver@...rochip.com, Andrew Lunn <andrew@...n.ch>,
Florian Fainelli <f.fainelli@...il.com>,
Vivien Didelot <vivien.didelot@...il.com>,
Claudiu Manoil <claudiu.manoil@....com>
Subject: Re: [RFC PATCH net-next 06/16] net: mscc: ocelot: use ipv6 in the
aggregation code
On 08/12/2020 14:07:52+0200, Vladimir Oltean wrote:
> IPv6 header information is not currently part of the entropy source for
> the 4-bit aggregation code used for LAG offload, even though it could be.
> The hardware reference manual says about these fields:
>
> ANA::AGGR_CFG.AC_IP6_TCPUDP_PORT_ENA
> Use IPv6 TCP/UDP port when calculating aggregation code. Configure
> identically for all ports. Recommended value is 1.
>
> ANA::AGGR_CFG.AC_IP6_FLOW_LBL_ENA
> Use IPv6 flow label when calculating AC. Configure identically for all
> ports. Recommended value is 1.
>
> Integration with the xmit_hash_policy of the bonding interface is TBD.
>
> Signed-off-by: Vladimir Oltean <vladimir.oltean@....com>
Reviewed-by: Alexandre Belloni <alexandre.belloni@...tlin.com>
> ---
> drivers/net/ethernet/mscc/ocelot.c | 5 ++++-
> 1 file changed, 4 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/net/ethernet/mscc/ocelot.c b/drivers/net/ethernet/mscc/ocelot.c
> index 7a5c534099d3..13e86dd71e5a 100644
> --- a/drivers/net/ethernet/mscc/ocelot.c
> +++ b/drivers/net/ethernet/mscc/ocelot.c
> @@ -1557,7 +1557,10 @@ int ocelot_init(struct ocelot *ocelot)
> ocelot_write(ocelot, ANA_AGGR_CFG_AC_SMAC_ENA |
> ANA_AGGR_CFG_AC_DMAC_ENA |
> ANA_AGGR_CFG_AC_IP4_SIPDIP_ENA |
> - ANA_AGGR_CFG_AC_IP4_TCPUDP_ENA, ANA_AGGR_CFG);
> + ANA_AGGR_CFG_AC_IP4_TCPUDP_ENA |
> + ANA_AGGR_CFG_AC_IP6_FLOW_LBL_ENA |
> + ANA_AGGR_CFG_AC_IP6_TCPUDP_ENA,
> + ANA_AGGR_CFG);
>
> /* Set MAC age time to default value. The entry is aged after
> * 2*AGE_PERIOD
> --
> 2.25.1
>
--
Alexandre Belloni, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
Powered by blists - more mailing lists