[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20201216122903.GD2814589@piout.net>
Date: Wed, 16 Dec 2020 13:29:03 +0100
From: Alexandre Belloni <alexandre.belloni@...tlin.com>
To: Vladimir Oltean <vladimir.oltean@....com>
Cc: Tobias Waldekranz <tobias@...dekranz.com>,
"David S . Miller" <davem@...emloft.net>,
Jakub Kicinski <kuba@...nel.org>, netdev@...r.kernel.org,
UNGLinuxDriver@...rochip.com, Andrew Lunn <andrew@...n.ch>,
Florian Fainelli <f.fainelli@...il.com>,
Vivien Didelot <vivien.didelot@...il.com>,
Claudiu Manoil <claudiu.manoil@....com>
Subject: Re: [RFC PATCH net-next 10/16] net: mscc: ocelot: reapply bridge
forwarding mask on bonding join/leave
On 08/12/2020 14:07:56+0200, Vladimir Oltean wrote:
> Applying the bridge forwarding mask currently is done only on the STP
> state changes for any port. But it depends on both STP state changes,
> and bonding interface state changes. Export the bit that recalculates
> the forwarding mask so that it could be reused, and call it when a port
> starts and stops offloading a bonding interface.
>
> Signed-off-by: Vladimir Oltean <vladimir.oltean@....com>
Reviewed-by: Alexandre Belloni <alexandre.belloni@...tlin.com>
> ---
> drivers/net/ethernet/mscc/ocelot.c | 68 +++++++++++++++++-------------
> 1 file changed, 38 insertions(+), 30 deletions(-)
>
> diff --git a/drivers/net/ethernet/mscc/ocelot.c b/drivers/net/ethernet/mscc/ocelot.c
> index c3c6682e6e79..ee0fcee8e09a 100644
> --- a/drivers/net/ethernet/mscc/ocelot.c
> +++ b/drivers/net/ethernet/mscc/ocelot.c
> @@ -899,11 +899,45 @@ static u32 ocelot_get_bond_mask(struct ocelot *ocelot, struct net_device *bond)
> return bond_mask;
> }
>
> +static void ocelot_apply_bridge_fwd_mask(struct ocelot *ocelot)
> +{
> + int port;
> +
> + /* Apply FWD mask. The loop is needed to add/remove the current port as
> + * a source for the other ports. If the source port is in a bond, then
> + * all the other ports from that bond need to be removed from this
> + * source port's forwarding mask.
> + */
> + for (port = 0; port < ocelot->num_phys_ports; port++) {
> + if (ocelot->bridge_fwd_mask & BIT(port)) {
> + unsigned long mask = ocelot->bridge_fwd_mask & ~BIT(port);
> + int lag;
> +
> + for (lag = 0; lag < ocelot->num_phys_ports; lag++) {
> + unsigned long bond_mask = ocelot->lags[lag];
> +
> + if (!bond_mask)
> + continue;
> +
> + if (bond_mask & BIT(port)) {
> + mask &= ~bond_mask;
> + break;
> + }
> + }
> +
> + ocelot_write_rix(ocelot, mask,
> + ANA_PGID_PGID, PGID_SRC + port);
> + } else {
> + ocelot_write_rix(ocelot, 0,
> + ANA_PGID_PGID, PGID_SRC + port);
> + }
> + }
> +}
> +
> void ocelot_bridge_stp_state_set(struct ocelot *ocelot, int port, u8 state)
> {
> struct ocelot_port *ocelot_port = ocelot->ports[port];
> u32 port_cfg;
> - int p;
>
> if (!(BIT(port) & ocelot->bridge_mask))
> return;
> @@ -927,35 +961,7 @@ void ocelot_bridge_stp_state_set(struct ocelot *ocelot, int port, u8 state)
>
> ocelot_write_gix(ocelot, port_cfg, ANA_PORT_PORT_CFG, port);
>
> - /* Apply FWD mask. The loop is needed to add/remove the current port as
> - * a source for the other ports. If the source port is in a bond, then
> - * all the other ports from that bond need to be removed from this
> - * source port's forwarding mask.
> - */
> - for (p = 0; p < ocelot->num_phys_ports; p++) {
> - if (ocelot->bridge_fwd_mask & BIT(p)) {
> - unsigned long mask = ocelot->bridge_fwd_mask & ~BIT(p);
> - int lag;
> -
> - for (lag = 0; lag < ocelot->num_phys_ports; lag++) {
> - unsigned long bond_mask = ocelot->lags[lag];
> -
> - if (!bond_mask)
> - continue;
> -
> - if (bond_mask & BIT(p)) {
> - mask &= ~bond_mask;
> - break;
> - }
> - }
> -
> - ocelot_write_rix(ocelot, mask,
> - ANA_PGID_PGID, PGID_SRC + p);
> - } else {
> - ocelot_write_rix(ocelot, 0,
> - ANA_PGID_PGID, PGID_SRC + p);
> - }
> - }
> + ocelot_apply_bridge_fwd_mask(ocelot);
> }
> EXPORT_SYMBOL(ocelot_bridge_stp_state_set);
>
> @@ -1315,6 +1321,7 @@ int ocelot_port_lag_join(struct ocelot *ocelot, int port,
> }
>
> ocelot_setup_lag(ocelot, lag);
> + ocelot_apply_bridge_fwd_mask(ocelot);
> ocelot_set_aggr_pgids(ocelot);
>
> return 0;
> @@ -1350,6 +1357,7 @@ void ocelot_port_lag_leave(struct ocelot *ocelot, int port,
> ocelot_write_gix(ocelot, port_cfg | ANA_PORT_PORT_CFG_PORTID_VAL(port),
> ANA_PORT_PORT_CFG, port);
>
> + ocelot_apply_bridge_fwd_mask(ocelot);
> ocelot_set_aggr_pgids(ocelot);
> }
> EXPORT_SYMBOL(ocelot_port_lag_leave);
> --
> 2.25.1
>
--
Alexandre Belloni, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
Powered by blists - more mailing lists