lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  PHC 
Open Source and information security mailing list archives
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Date:   Sun, 27 Dec 2020 14:04:01 +0100
From:   Wolfram Sang <>
Cc:     Wolfram Sang <>,,,,,
        Sergei Shtylyov <>
Subject: [PATCH 0/5] v3u: add support for RAVB

Here is the series to enable RAVB on V3U. I took the DTS patches
from the BSP, the rest was developed on mainline tree. Note that only
RAVB0 could be tested because the other ones did not have PHYs attached.

Also, the last patch is a workaround. 'reset-gpios' cannot be obtained
currently which makes the driver fail. The problem is that
pinctrl_ready_for_gpio_range() returns EPROBE-DEFER. I hope Geert has an
idea because I got lost in the GPIO and V3U pinctrl details there. It
seems more of a PFC/CPG/GPIO problem to me.

Without the reset-gpio, the driver binds to avb0 and I can ping the host
successfully. So, I think at least the first three patches are ready.

Let me know your thoughts!

All the best,


Tho Vu (2):
  arm64: dts: renesas: r8a779a0: Add Ethernet-AVB support
  arm64: dts: renesas: falcon: Add Ethernet-AVB support

Wolfram Sang (3):
  dt-bindings: net: renesas,etheravb: Add r8a779a0 support
  clk: renesas: r8a779a0: add clocks for RAVB
  arm64: dts: r8a779a0: WIP disable reset-gpios for AVB

 .../bindings/net/renesas,etheravb.yaml        |   1 +
 .../boot/dts/renesas/r8a779a0-falcon.dts      | 195 +++++++++++++
 arch/arm64/boot/dts/renesas/r8a779a0.dtsi     | 270 ++++++++++++++++++
 drivers/clk/renesas/r8a779a0-cpg-mssr.c       |   6 +
 4 files changed, 472 insertions(+)


Powered by blists - more mailing lists