netdev - [PATCH net-next v3] net: mhi: Add raw IP mode support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <1609232694-10858-1-git-send-email-loic.poulain@linaro.org>
Date:   Tue, 29 Dec 2020 10:04:54 +0100
From:   Loic Poulain <loic.poulain@...aro.org>
To:     kuba@...nel.org, davem@...emloft.net
Cc:     netdev@...r.kernel.org, Loic Poulain <loic.poulain@...aro.org>
Subject: [PATCH net-next v3] net: mhi: Add raw IP mode support

MHI net is protocol agnostic, the payload protocol depends on the modem
configuration, which can be either RMNET (IP muxing and aggregation) or
raw IP. This patch adds support for incomming IPv4/IPv6 packets, that
was previously unconditionnaly reported as RMNET packets.

Signed-off-by: Loic Poulain <loic.poulain@...aro.org>
---
 drivers/net/mhi_net.c | 15 +++++++++++++--
 1 file changed, 13 insertions(+), 2 deletions(-)

diff --git a/drivers/net/mhi_net.c b/drivers/net/mhi_net.c
index e3f9c0d..478e78f 100644
--- a/drivers/net/mhi_net.c
+++ b/drivers/net/mhi_net.c
@@ -121,7 +121,7 @@ static const struct net_device_ops mhi_netdev_ops = {
 static void mhi_net_setup(struct net_device *ndev)
 {
 	ndev->header_ops = NULL;  /* No header */
-	ndev->type = ARPHRD_NONE; /* QMAP... */
+	ndev->type = ARPHRD_RAWIP;
 	ndev->hard_header_len = 0;
 	ndev->addr_len = 0;
 	ndev->flags = IFF_POINTOPOINT | IFF_NOARP;
@@ -157,7 +157,18 @@ static void mhi_net_dl_callback(struct mhi_device *mhi_dev,
 		u64_stats_add(&mhi_netdev->stats.rx_bytes, mhi_res->bytes_xferd);
 		u64_stats_update_end(&mhi_netdev->stats.rx_syncp);
 
-		skb->protocol = htons(ETH_P_MAP);
+		switch (skb->data[0] & 0xf0) {
+		case 0x40:
+			skb->protocol = htons(ETH_P_IP);
+			break;
+		case 0x60:
+			skb->protocol = htons(ETH_P_IPV6);
+			break;
+		default:
+			skb->protocol = htons(ETH_P_MAP);
+			break;
+		}
+
 		skb_put(skb, mhi_res->bytes_xferd);
 		netif_rx(skb);
 	}
-- 
2.7.4