lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:   Mon, 4 Jan 2021 14:16:38 +0100
From:   Steen Hegelund <steen.hegelund@...rochip.com>
To:     Leon Romanovsky <leon@...nel.org>
CC:     Kishon Vijay Abraham I <kishon@...com>,
        Vinod Koul <vkoul@...nel.org>,
        <linux-arm-kernel@...ts.infradead.org>,
        Alexandre Belloni <alexandre.belloni@...tlin.com>,
        Lars Povlsen <lars.povlsen@...rochip.com>,
        Bjarni Jonasson <bjarni.jonasson@...rochip.com>,
        Microchip UNG Driver List <UNGLinuxDriver@...rochip.com>,
        <netdev@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
        Andrew Lunn <andrew@...n.ch>
Subject: Re: [PATCH v11 3/4] phy: Add Sparx5 ethernet serdes PHY driver

Hi Leon,


On Mon, 2021-01-04 at 14:15 +0200, Leon Romanovsky wrote:
> 
> <...>
> 
> > +struct sparx5_sd10g28_args {
> > +     bool                 skip_cmu_cfg; /* Enable/disable CMU cfg
> > */
> > +     bool                 no_pwrcycle;  /* Omit initial power-
> > cycle */
> > +     bool                 txinvert;     /* Enable inversion of
> > output data */
> > +     bool                 rxinvert;     /* Enable inversion of
> > input data */
> > +     bool                 txmargin;     /* Set output level to 
> > half/full */
> > +     u16                  txswing;      /* Set output level */
> > +     bool                 mute;         /* Mute Output Buffer */
> > +     bool                 is_6g;
> > +     bool                 reg_rst;
> > +};
> 
> All those bools in structs can be squeezed into one u8, just use
> bitfields, e.g. "u8 a:1;".

Got you.

> 
> Also I strongly advise do not do vertical alignment, it will cause to
> too many churn later when this code will be updated.

So just a single space between the type and the name and the comment is
preferable?

> 
> > +
> 
> <...>
> 
> > +static inline void __iomem *sdx5_addr(void __iomem *base[],
> > +                                   int id, int tinst, int tcnt,
> > +                                   int gbase, int ginst,
> > +                                   int gcnt, int gwidth,
> > +                                   int raddr, int rinst,
> > +                                   int rcnt, int rwidth)
> > +{
> > +#if defined(CONFIG_DEBUG_KERNEL)
> > +     WARN_ON((tinst) >= tcnt);
> > +     WARN_ON((ginst) >= gcnt);
> > +     WARN_ON((rinst) >= rcnt);
> > +#endif
> 
> Please don't put "#if defined(CONFIG_DEBUG_KERNEL)", print WARN_ON().

OK, I will drop the #if and keep the WARN_ON...

> 
> Thanks

Thank you for your comments.

BR
Steen

Powered by blists - more mailing lists