| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20210106120711.630-3-zajec5@gmail.com>
Date: Wed, 6 Jan 2021 13:07:11 +0100
From: Rafał Miłecki <zajec5@...il.com>
To: "David S . Miller" <davem@...emloft.net>,
Jakub Kicinski <kuba@...nel.org>,
Rob Herring <robh+dt@...nel.org>
Cc: Andrew Lunn <andrew@...n.ch>,
Vivien Didelot <vivien.didelot@...il.com>,
Florian Fainelli <f.fainelli@...il.com>,
Vladimir Oltean <olteanv@...il.com>, netdev@...r.kernel.org,
devicetree@...r.kernel.org, bcm-kernel-feedback-list@...adcom.com,
Rafał Miłecki <rafal@...ecki.pl>
Subject: [PATCH net-next 3/3] net: dsa: bcm_sf2: support BCM4908's integrated switch
From: Rafał Miłecki <rafal@...ecki.pl>
BCM4908 family SoCs come with integrated Starfighter 2 switch. Its
registers layout it a mix of BCM7278 and BCM7445. It has 5 integrated
PHYs and 8 ports. It also supports RGMII and SerDes.
Signed-off-by: Rafał Miłecki <rafal@...ecki.pl>
---
drivers/net/dsa/b53/b53_common.c | 14 +++++++++++++
drivers/net/dsa/b53/b53_priv.h | 1 +
drivers/net/dsa/bcm_sf2.c | 36 +++++++++++++++++++++++++++++---
drivers/net/dsa/bcm_sf2_regs.h | 1 +
4 files changed, 49 insertions(+), 3 deletions(-)
diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c
index 288b5a5c3e0d..85dddd87bcfc 100644
--- a/drivers/net/dsa/b53/b53_common.c
+++ b/drivers/net/dsa/b53/b53_common.c
@@ -2459,6 +2459,20 @@ static const struct b53_chip_data b53_switch_chips[] = {
.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
.jumbo_size_reg = B53_JUMBO_MAX_SIZE,
},
+ /* Starfighter 2 */
+ {
+ .chip_id = BCM4908_DEVICE_ID,
+ .dev_name = "BCM4908",
+ .vlans = 4096,
+ .enabled_ports = 0x1bf,
+ .arl_bins = 4,
+ .arl_buckets = 256,
+ .cpu_port = 8, /* TODO: ports 4, 5, 8 */
+ .vta_regs = B53_VTA_REGS,
+ .duplex_reg = B53_DUPLEX_STAT_GE,
+ .jumbo_pm_reg = B53_JUMBO_PORT_MASK,
+ .jumbo_size_reg = B53_JUMBO_MAX_SIZE,
+ },
{
.chip_id = BCM7445_DEVICE_ID,
.dev_name = "BCM7445",
diff --git a/drivers/net/dsa/b53/b53_priv.h b/drivers/net/dsa/b53/b53_priv.h
index 7c67409bb186..6d0c724763c7 100644
--- a/drivers/net/dsa/b53/b53_priv.h
+++ b/drivers/net/dsa/b53/b53_priv.h
@@ -64,6 +64,7 @@ struct b53_io_ops {
#define B53_INVALID_LANE 0xff
enum {
+ BCM4908_DEVICE_ID = 0x4908,
BCM5325_DEVICE_ID = 0x25,
BCM5365_DEVICE_ID = 0x65,
BCM5389_DEVICE_ID = 0x89,
diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c
index 1e9a0adda2d6..afbdbe234518 100644
--- a/drivers/net/dsa/bcm_sf2.c
+++ b/drivers/net/dsa/bcm_sf2.c
@@ -105,7 +105,8 @@ static void bcm_sf2_imp_setup(struct dsa_switch *ds, int port)
b53_brcm_hdr_setup(ds, port);
if (port == 8) {
- if (priv->type == BCM7445_DEVICE_ID)
+ if (priv->type == BCM4908_DEVICE_ID ||
+ priv->type == BCM7445_DEVICE_ID)
offset = CORE_STS_OVERRIDE_IMP;
else
offset = CORE_STS_OVERRIDE_IMP2;
@@ -715,7 +716,8 @@ static void bcm_sf2_sw_mac_link_down(struct dsa_switch *ds, int port,
u32 reg, offset;
if (port != core_readl(priv, CORE_IMP0_PRT_ID)) {
- if (priv->type == BCM7445_DEVICE_ID)
+ if (priv->type == BCM4908_DEVICE_ID ||
+ priv->type == BCM7445_DEVICE_ID)
offset = CORE_STS_OVERRIDE_GMIIP_PORT(port);
else
offset = CORE_STS_OVERRIDE_GMIIP2_PORT(port);
@@ -742,7 +744,8 @@ static void bcm_sf2_sw_mac_link_up(struct dsa_switch *ds, int port,
bcm_sf2_sw_mac_link_set(ds, port, interface, true);
if (port != core_readl(priv, CORE_IMP0_PRT_ID)) {
- if (priv->type == BCM7445_DEVICE_ID)
+ if (priv->type == BCM4908_DEVICE_ID ||
+ priv->type == BCM7445_DEVICE_ID)
offset = CORE_STS_OVERRIDE_GMIIP_PORT(port);
else
offset = CORE_STS_OVERRIDE_GMIIP2_PORT(port);
@@ -1135,6 +1138,30 @@ struct bcm_sf2_of_data {
unsigned int num_cfp_rules;
};
+static const u16 bcm_sf2_4908_reg_offsets[] = {
+ [REG_SWITCH_CNTRL] = 0x00,
+ [REG_SWITCH_STATUS] = 0x04,
+ [REG_DIR_DATA_WRITE] = 0x08,
+ [REG_DIR_DATA_READ] = 0x0c,
+ [REG_SWITCH_REVISION] = 0x10,
+ [REG_PHY_REVISION] = 0x14,
+ [REG_SPHY_CNTRL] = 0x24,
+ [REG_CROSSBAR] = 0xc8,
+ [REG_RGMII_0_CNTRL] = 0xe0,
+ [REG_RGMII_1_CNTRL] = 0xec,
+ [REG_RGMII_2_CNTRL] = 0xf8,
+ [REG_LED_0_CNTRL] = 0x40,
+ [REG_LED_1_CNTRL] = 0x4c,
+ [REG_LED_2_CNTRL] = 0x58,
+};
+
+static const struct bcm_sf2_of_data bcm_sf2_4908_data = {
+ .type = BCM4908_DEVICE_ID,
+ .core_reg_align = 0,
+ .reg_offsets = bcm_sf2_4908_reg_offsets,
+ .num_cfp_rules = 0,
+};
+
/* Register offsets for the SWITCH_REG_* block */
static const u16 bcm_sf2_7445_reg_offsets[] = {
[REG_SWITCH_CNTRL] = 0x00,
@@ -1183,6 +1210,9 @@ static const struct bcm_sf2_of_data bcm_sf2_7278_data = {
};
static const struct of_device_id bcm_sf2_of_match[] = {
+ { .compatible = "brcm,bcm4908-switch",
+ .data = &bcm_sf2_4908_data
+ },
{ .compatible = "brcm,bcm7445-switch-v4.0",
.data = &bcm_sf2_7445_data
},
diff --git a/drivers/net/dsa/bcm_sf2_regs.h b/drivers/net/dsa/bcm_sf2_regs.h
index d8a5e6269c0e..1d2d55c9f8aa 100644
--- a/drivers/net/dsa/bcm_sf2_regs.h
+++ b/drivers/net/dsa/bcm_sf2_regs.h
@@ -17,6 +17,7 @@ enum bcm_sf2_reg_offs {
REG_SWITCH_REVISION,
REG_PHY_REVISION,
REG_SPHY_CNTRL,
+ REG_CROSSBAR,
REG_RGMII_0_CNTRL,
REG_RGMII_1_CNTRL,
REG_RGMII_2_CNTRL,
--
2.26.2
Powered by blists - more mailing lists