| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20210106130622.2110387-4-danieller@mellanox.com>
Date: Wed, 6 Jan 2021 15:06:18 +0200
From: Danielle Ratson <danieller@...lanox.com>
To: netdev@...r.kernel.org
Cc: davem@...emloft.net, kuba@...nel.org, jiri@...dia.com,
andrew@...n.ch, f.fainelli@...il.com, mkubecek@...e.cz,
mlxsw@...dia.com, idosch@...dia.com,
Danielle Ratson <danieller@...dia.com>
Subject: [PATCH net-next repost v2 3/7] ethtool: Expose the number of lanes in use
From: Danielle Ratson <danieller@...dia.com>
Currently, ethtool does not expose how many lanes are used when the
link is up.
After adding a possibility to advertise or force a specific number of
lanes, the lanes in use value can be either the maximum width of the port
or below.
Extend ethtool to expose the number of lanes currently in use for
drivers that support it.
For example:
$ ethtool -s swp1 speed 100000 lanes 4
$ ethtool -s swp2 speed 100000 lanes 4
$ ip link set swp1 up
$ ip link set swp2 up
$ ethtool swp1
Settings for swp1:
Supported ports: [ FIBRE Backplane ]
Supported link modes: 1000baseT/Full
10000baseT/Full
1000baseKX/Full
10000baseKR/Full
10000baseR_FEC
40000baseKR4/Full
40000baseCR4/Full
40000baseSR4/Full
40000baseLR4/Full
25000baseCR/Full
25000baseKR/Full
25000baseSR/Full
50000baseCR2/Full
50000baseKR2/Full
100000baseKR4/Full
100000baseSR4/Full
100000baseCR4/Full
100000baseLR4_ER4/Full
50000baseSR2/Full
10000baseCR/Full
10000baseSR/Full
10000baseLR/Full
10000baseER/Full
50000baseKR/Full
50000baseSR/Full
50000baseCR/Full
50000baseLR_ER_FR/Full
50000baseDR/Full
100000baseKR2/Full
100000baseSR2/Full
100000baseCR2/Full
100000baseLR2_ER2_FR2/Full
100000baseDR2/Full
200000baseKR4/Full
200000baseSR4/Full
200000baseLR4_ER4_FR4/Full
200000baseDR4/Full
200000baseCR4/Full
Supported pause frame use: Symmetric Receive-only
Supports auto-negotiation: Yes
Supported FEC modes: Not reported
Advertised link modes: 1000baseT/Full
10000baseT/Full
1000baseKX/Full
1000baseKX/Full
10000baseKR/Full
10000baseR_FEC
40000baseKR4/Full
40000baseCR4/Full
40000baseSR4/Full
40000baseLR4/Full
25000baseCR/Full
25000baseKR/Full
25000baseSR/Full
50000baseCR2/Full
50000baseKR2/Full
100000baseKR4/Full
100000baseSR4/Full
100000baseCR4/Full
100000baseLR4_ER4/Full
50000baseSR2/Full
10000baseCR/Full
10000baseSR/Full
10000baseLR/Full
10000baseER/Full
200000baseKR4/Full
200000baseSR4/Full
200000baseLR4_ER4_FR4/Full
200000baseDR4/Full
200000baseCR4/Full
Advertised pause frame use: No
Advertised auto-negotiation: Yes
Advertised FEC modes: Not reported
Advertised link modes: 100000baseKR4/Full
100000baseSR4/Full
100000baseCR4/Full
100000baseLR4_ER4/Full
Advertised pause frame use: No
Advertised auto-negotiation: Yes
Advertised FEC modes: Not reported
Speed: 100000Mb/s
Lanes: 4
Duplex: Full
Auto-negotiation: on
Port: Direct Attach Copper
PHYAD: 0
Transceiver: internal
Link detected: yes
Signed-off-by: Danielle Ratson <danieller@...dia.com>
---
Notes:
v2:
* Reword commit message.
* Since now we get a link mode from driver, instead of each
parameter separately, simply derive lanes from it.
net/ethtool/linkmodes.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/net/ethtool/linkmodes.c b/net/ethtool/linkmodes.c
index 505a9b395fce..f22761dcdb2e 100644
--- a/net/ethtool/linkmodes.c
+++ b/net/ethtool/linkmodes.c
@@ -166,11 +166,15 @@ static int linkmodes_prepare_data(const struct ethnl_req_info *req_base,
goto out;
}
+ if (!(dev->ethtool_ops->capabilities & ETHTOOL_CAP_LINK_LANES_SUPPORTED))
+ data->ksettings.lanes = ETHTOOL_LANES_UNKNOWN;
+
if (data->ksettings.link_mode) {
for (i = 0; i < __ETHTOOL_LINK_MODE_MASK_NBITS; i++) {
if (data->ksettings.link_mode == i) {
link_info = &link_mode_params[i];
data->lsettings->speed = link_info->speed;
+ data->ksettings.lanes = link_info->lanes;
data->lsettings->duplex = link_info->duplex;
}
}
@@ -196,6 +200,7 @@ static int linkmodes_reply_size(const struct ethnl_req_info *req_base,
len = nla_total_size(sizeof(u8)) /* LINKMODES_AUTONEG */
+ nla_total_size(sizeof(u32)) /* LINKMODES_SPEED */
+ + nla_total_size(sizeof(u32)) /* LINKMODES_LANES */
+ nla_total_size(sizeof(u8)) /* LINKMODES_DUPLEX */
+ 0;
ret = ethnl_bitset_size(ksettings->link_modes.advertising,
@@ -253,6 +258,7 @@ static int linkmodes_fill_reply(struct sk_buff *skb,
}
if (nla_put_u32(skb, ETHTOOL_A_LINKMODES_SPEED, lsettings->speed) ||
+ nla_put_u32(skb, ETHTOOL_A_LINKMODES_LANES, ksettings->lanes) ||
nla_put_u8(skb, ETHTOOL_A_LINKMODES_DUPLEX, lsettings->duplex))
return -EMSGSIZE;
--
2.26.2
Powered by blists - more mailing lists