netdev - [PATCH 5/6] dpaa2-mac: remove an unnecessary check

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20210107153638.753942-6-ciorneiioana@gmail.com>
Date:   Thu,  7 Jan 2021 17:36:37 +0200
From:   Ioana Ciornei <ciorneiioana@...il.com>
To:     davem@...emloft.net, kuba@...nel.org, netdev@...r.kernel.org
Cc:     laurentiu.tudor@....com, Ioana Ciornei <ioana.ciornei@....com>
Subject: [PATCH 5/6] dpaa2-mac: remove an unnecessary check

From: Ioana Ciornei <ioana.ciornei@....com>

The dpaa2-eth driver has phylink integration only if the connected dpmac
object is in TYPE_PHY (aka the PCS/PHY etc link status is managed by
Linux instead of the firmware). The check is thus unnecessary because
the code path that reaches the .mac_link_up() callback is only with
TYPE_PHY dpmac objects.

Signed-off-by: Ioana Ciornei <ioana.ciornei@....com>
---
 .../net/ethernet/freescale/dpaa2/dpaa2-mac.c  | 43 ++++++++-----------
 1 file changed, 19 insertions(+), 24 deletions(-)

diff --git a/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c b/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c
index 666bc88c178f..40aa81eb3c4b 100644
--- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c
+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c
@@ -174,30 +174,25 @@ static void dpaa2_mac_link_up(struct phylink_config *config,
 
 	dpmac_state->up = 1;
 
-	if (mac->if_link_type == DPMAC_LINK_TYPE_PHY) {
-		/* If the DPMAC is configured for PHY mode, we need
-		 * to pass the link parameters to the MC firmware.
-		 */
-		dpmac_state->rate = speed;
-
-		if (duplex == DUPLEX_HALF)
-			dpmac_state->options |= DPMAC_LINK_OPT_HALF_DUPLEX;
-		else if (duplex == DUPLEX_FULL)
-			dpmac_state->options &= ~DPMAC_LINK_OPT_HALF_DUPLEX;
-
-		/* This is lossy; the firmware really should take the pause
-		 * enablement status rather than pause/asym pause status.
-		 */
-		if (rx_pause)
-			dpmac_state->options |= DPMAC_LINK_OPT_PAUSE;
-		else
-			dpmac_state->options &= ~DPMAC_LINK_OPT_PAUSE;
-
-		if (rx_pause ^ tx_pause)
-			dpmac_state->options |= DPMAC_LINK_OPT_ASYM_PAUSE;
-		else
-			dpmac_state->options &= ~DPMAC_LINK_OPT_ASYM_PAUSE;
-	}
+	dpmac_state->rate = speed;
+
+	if (duplex == DUPLEX_HALF)
+		dpmac_state->options |= DPMAC_LINK_OPT_HALF_DUPLEX;
+	else if (duplex == DUPLEX_FULL)
+		dpmac_state->options &= ~DPMAC_LINK_OPT_HALF_DUPLEX;
+
+	/* This is lossy; the firmware really should take the pause
+	 * enablement status rather than pause/asym pause status.
+	 */
+	if (rx_pause)
+		dpmac_state->options |= DPMAC_LINK_OPT_PAUSE;
+	else
+		dpmac_state->options &= ~DPMAC_LINK_OPT_PAUSE;
+
+	if (rx_pause ^ tx_pause)
+		dpmac_state->options |= DPMAC_LINK_OPT_ASYM_PAUSE;
+	else
+		dpmac_state->options &= ~DPMAC_LINK_OPT_ASYM_PAUSE;
 
 	err = dpmac_set_link_state(mac->mc_io, 0,
 				   mac->mc_dev->mc_handle, dpmac_state);
-- 
2.29.2