[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <X/c8EoDjpj3PgSkI@lunn.ch>
Date: Thu, 7 Jan 2021 17:51:30 +0100
From: Andrew Lunn <andrew@...n.ch>
To: Pali Rohár <pali@...nel.org>
Cc: Russell King - ARM Linux admin <linux@...linux.org.uk>,
"David S. Miller" <davem@...emloft.net>,
Jakub Kicinski <kuba@...nel.org>,
Thomas Schreiber <tschreibe@...il.com>,
Heiner Kallweit <hkallweit1@...il.com>,
Marek Behún <kabel@...nel.org>,
netdev@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v2 3/3] net: sfp: add mode quirk for GPON module Ubiquiti
U-Fiber Instant
On Wed, Jan 06, 2021 at 04:37:49PM +0100, Pali Rohár wrote:
> SFP GPON module Ubiquiti U-Fiber Instant has in its EEPROM stored nonsense
> information. It claims that support all transceiver types including 10G
> Ethernet which is not truth. So clear all claimed modes and set only one
> mode which module supports: 1000baseX_Full.
>
> Also this module have set SFF phys_id in its EEPROM. Kernel SFP subsustem
> currently does not allow to use SFP modules detected as SFF. Therefore add
> and exception for this module so it can be detected as supported.
>
> This change finally allows to detect and use SFP GPON module Ubiquiti
> U-Fiber Instant on Linux system.
>
> EEPROM content of this SFP module is (where XX is serial number):
>
> 00: 02 04 0b ff ff ff ff ff ff ff ff 03 0c 00 14 c8 ???........??.??
> 10: 00 00 00 00 55 42 4e 54 20 20 20 20 20 20 20 20 ....UBNT
> 20: 20 20 20 20 00 18 e8 29 55 46 2d 49 4e 53 54 41 .??)UF-INSTA
> 30: 4e 54 20 20 20 20 20 20 34 20 20 20 05 1e 00 36 NT 4 ??.6
> 40: 00 06 00 00 55 42 4e 54 XX XX XX XX XX XX XX XX .?..UBNTXXXXXXXX
> 50: 20 20 20 20 31 34 30 31 32 33 20 20 60 80 02 41 140123 `??A
>
> Signed-off-by: Pali Rohár <pali@...nel.org>
Reviewed-by: Andrew Lunn <andrew@...n.ch>
Andrew
Powered by blists - more mailing lists