[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20210110102310.GD1551@shell.armlinux.org.uk>
Date: Sun, 10 Jan 2021 10:23:10 +0000
From: Russell King - ARM Linux admin <linux@...linux.org.uk>
To: Yuusuke Ashizuka <ashiduka@...itsu.com>
Cc: andrew@...n.ch, hkallweit1@...il.com, davem@...emloft.net,
kuba@...nel.org, netdev@...r.kernel.org, torii.ken1@...itsu.com
Subject: Re: [PATCH v2] net: phy: realtek: Add support for RTL9000AA/AN
On Sun, Jan 10, 2021 at 05:52:21PM +0900, Yuusuke Ashizuka wrote:
> RTL9000AA/AN as 100BASE-T1 is following:
> - 100 Mbps
> - Full duplex
> - Link Status Change Interrupt
>
> Signed-off-by: Yuusuke Ashizuka <ashiduka@...itsu.com>
> Signed-off-by: Torii Kenichi <torii.ken1@...itsu.com>
Not a review comment on your patch, but, we really need to do
something with the way phylib handles configuration changes - we
have the current situation where config_aneg() _will_ get called
for PHYs like this that do not support autonegotiation if userspace
attempts to enable autoneg - there is nothing in
phy_ethtool_ksettings_set() that prevents this.
Returning an error from config_aneg() achieves nothing, and
resetting the settings in config_init() also does nothing to avoid
autonegotiation being enabled.
I think we need phy_ethtool_ksettings_set() to check whether
ETHTOOL_LINK_MODE_Autoneg_BIT is set in phydev->supported before
allowing the AUTONEG_ENABLE case.
--
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!
Powered by blists - more mailing lists