netdev - [PATCH 1/1] can: dev: add software tx timestamps

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Sun, 10 Jan 2021 19:35:26 +0900
From:   Vincent Mailhol <mailhol.vincent@...adoo.fr>
To:     Marc Kleine-Budde <mkl@...gutronix.de>, linux-can@...r.kernel.org
Cc:     Vincent Mailhol <mailhol.vincent@...adoo.fr>,
        Wolfgang Grandegger <wg@...ndegger.com>,
        "David S. Miller" <davem@...emloft.net>,
        Jakub Kicinski <kuba@...nel.org>,
        netdev@...r.kernel.org (open list:NETWORKING DRIVERS),
        linux-kernel@...r.kernel.org (open list)
Subject: [PATCH 1/1] can: dev: add software tx timestamps

Call skb_tx_timestamp() within can_put_echo_skb() so that a software
tx timestamp gets attached on the skb.

There two main reasons to include this call in can_put_echo_skb():

  * It easily allow to enable the tx timestamp on all devices with
    just one small change.

  * According to Documentation/networking/timestamping.rst, the tx
    timestamps should be generated in the device driver as close as
    possible, but always prior to passing the packet to the network
    interface. During the call to can_put_echo_skb(), the skb gets
    cloned meaning that the driver should not dereference the skb
    variable anymore after can_put_echo_skb() returns. This makes
    can_put_echo_skb() the very last place we can use the skb without
    having to access the echo_skb[] array.

Remarks:

  * By default, skb_tx_timestamp() does nothing. It needs to be
    activated by passing the SOF_TIMESTAMPING_TX_SOFTWARE flag either
    through socket options or control messages.

  * The hardware rx timestamp of a local loopback message is the
    hardware tx timestamp. This means that there are no needs to
    implement SOF_TIMESTAMPING_TX_HARDWARE for CAN sockets.

References:

Support for the error queue in CAN RAW sockets (which is needed for tx
timestamps) was introduced in:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=eb88531bdbfaafb827192d1fc6c5a3fcc4fadd96

Signed-off-by: Vincent Mailhol <mailhol.vincent@...adoo.fr>
---
 drivers/net/can/dev.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/net/can/dev.c b/drivers/net/can/dev.c
index 3486704c8a95..3904e0874543 100644
--- a/drivers/net/can/dev.c
+++ b/drivers/net/can/dev.c
@@ -484,6 +484,8 @@ int can_put_echo_skb(struct sk_buff *skb, struct net_device *dev,
 
 		/* save this skb for tx interrupt echo handling */
 		priv->echo_skb[idx] = skb;
+
+		skb_tx_timestamp(skb);
 	} else {
 		/* locking problem with netif_stop_queue() ?? */
 		netdev_err(dev, "%s: BUG! echo_skb %d is occupied!\n", __func__, idx);
-- 
2.26.2