[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20210112095437.6488-1-mailhol.vincent@wanadoo.fr>
Date: Tue, 12 Jan 2021 18:54:36 +0900
From: Vincent Mailhol <mailhol.vincent@...adoo.fr>
To: Marc Kleine-Budde <mkl@...gutronix.de>, linux-can@...r.kernel.org,
Jeroen Hofstee <jhofstee@...tronenergy.com>,
Richard Cochran <richardcochran@...il.com>
Cc: Wolfgang Grandegger <wg@...ndegger.com>,
"David S . Miller" <davem@...emloft.net>,
Jakub Kicinski <kuba@...nel.org>,
"open list : NETWORKING DRIVERS" <netdev@...r.kernel.org>,
Vincent Mailhol <mailhol.vincent@...adoo.fr>
Subject: [PATCH v4 0/1] Add software TX timestamps to the CAN devices
With the ongoing work to add BQL to Socket CAN, I figured out that it
would be nice to have an easy way to mesure the latency.
And one easy way to do so it to check the round trip time of the
packet by doing the difference between the software rx timestamp and
the software tx timestamp.
rx timestamps are already available. This patch gives the missing
piece: add a tx software timestamp feature to the CAN devices.
Of course, the tx software timestamp might also be used for other
purposes such as performance measurements of the different queuing
disciplines (e.g. by checking the difference between the kernel tx
software timestamp and the userland tx software timestamp).
v2 was a mistake, please ignore it (fogot to do git add, changes were
not reflected...)
v3 reflects the comments that Jeroen made in
https://lkml.org/lkml/2021/1/10/54
v4 rebases the patch on linux-can-next/testing and suppress the
comment related to SOF_TIMESTAMPING_TX_HARDWARE.
Reference: https://lore.kernel.org/linux-can/20210111171152.GB11715@hoboy.vegasvil.org/
Vincent Mailhol (1):
can: dev: add software tx timestamps
drivers/net/can/dev/skb.c | 2 ++
1 file changed, 2 insertions(+)
--
2.26.2
Powered by blists - more mailing lists