[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20210112195405.12890-1-kabel@kernel.org>
Date: Tue, 12 Jan 2021 20:53:59 +0100
From: Marek Behún <kabel@...nel.org>
To: netdev@...r.kernel.org
Cc: pavana.sharma@...i.com, vivien.didelot@...il.com,
f.fainelli@...il.com, kuba@...nel.org, lkp@...el.com,
davem@...emloft.net, ashkan.boldaji@...i.com, andrew@...n.ch,
Chris Packham <chris.packham@...iedtelesis.co.nz>,
olteanv@...il.com,
Russell King - ARM Linux admin <linux@...linux.org.uk>,
Marek Behún <kabel@...nel.org>
Subject: [PATCH net-next v15 0/6] Add support for mv88e6393x family of Marvell
Hello,
this is version 15 of patches adding support for Amethyst family to
mv88e6xxx. It should apply cleanly on net-next.
This series is tested on Marvell CN9130-CRB.
Changes from v14:
- added my Signed-off-by tags to Pavana's patches, since I am sending
them (as suggested by Andrew)
- added documentation to second patch adding 5gbase-r mode (as requested
by Russell)
- added Reviewed-by tags
- applied Vladimir's suggestions:
- reduced indentation level in mv88e6xxx_set_egress_port and
mv88e6393x_serdes_port_config
- removed 10000baseKR_Full from mv88e6393x_phylink_validate
- removed PHY_INTERFACE_MODE_10GKR from mv88e6xxx_port_set_cmode
Changes from v13:
- added patch that wraps .set_egress_port into mv88e6xxx_set_egress_port,
so that we do not have to set chip->*gress_dest_port members in every
implementation of this method
- for the patch that adds Amethyst support:
- added more information into commit message
- added these methods for mv88e6393x_ops:
.port_sync_link
.port_setup_message_port
.port_max_speed_mode (new implementation needed)
.atu_get_hash
.atu_set_hash
.serdes_pcs_config
.serdes_pcs_an_restart
.serdes_pcs_link_up
- this device can set upstream port per port, so implement
.port_set_upstream_port
instead of
.set_cpu_port
- removed USXGMII cmode (not yet supported, working on it)
- added debug messages into mv88e6393x_port_set_speed_duplex
- added Amethyst errata 4.5 (EEE should be disabled on SERDES ports)
- fixed 5gbase-r serdes configuration and interrupt handling
- refactored mv88e6393x_serdes_setup_errata
- refactored mv88e6393x_port_policy_write
- added patch implementing .port_set_policy for Amethyst
Marek
Marek Behún (2):
net: dsa: mv88e6xxx: wrap .set_egress_port method
net: dsa: mv88e6xxx: implement .port_set_policy for Amethyst
Pavana Sharma (4):
dt-bindings: net: Add 5GBASER phy interface
net: phy: Add 5GBASER interface mode
net: dsa: mv88e6xxx: Change serdes lane parameter type from u8 type to
int
net: dsa: mv88e6xxx: Add support for mv88e6393x family of Marvell
.../bindings/net/ethernet-controller.yaml | 1 +
Documentation/networking/phy.rst | 6 +
drivers/net/dsa/mv88e6xxx/chip.c | 227 ++++++++--
drivers/net/dsa/mv88e6xxx/chip.h | 20 +-
drivers/net/dsa/mv88e6xxx/global1.c | 19 +-
drivers/net/dsa/mv88e6xxx/global1.h | 2 +
drivers/net/dsa/mv88e6xxx/global2.h | 8 +
drivers/net/dsa/mv88e6xxx/port.c | 397 ++++++++++++++++--
drivers/net/dsa/mv88e6xxx/port.h | 50 ++-
drivers/net/dsa/mv88e6xxx/serdes.c | 394 +++++++++++++++--
drivers/net/dsa/mv88e6xxx/serdes.h | 108 +++--
include/linux/phy.h | 4 +
12 files changed, 1073 insertions(+), 163 deletions(-)
base-commit: c73a45965dd54a10c368191804b9de661eee1007
--
2.26.2
Powered by blists - more mailing lists