netdev - [PATCH v5 net-next 2/5] net: dsa: Don't offload port attributes on standalone ports

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20210113084255.22675-3-tobias@waldekranz.com>
Date:   Wed, 13 Jan 2021 09:42:52 +0100
From:   Tobias Waldekranz <tobias@...dekranz.com>
To:     davem@...emloft.net, kuba@...nel.org
Cc:     andrew@...n.ch, vivien.didelot@...il.com, f.fainelli@...il.com,
        olteanv@...il.com, j.vosburgh@...il.com, vfalico@...il.com,
        andy@...yhouse.net, netdev@...r.kernel.org
Subject: [PATCH v5 net-next 2/5] net: dsa: Don't offload port attributes on standalone ports

In a situation where a standalone port is indirectly attached to a
bridge (e.g. via a LAG) which is not offloaded, do not offload any
port attributes either. The port should behave as a standard NIC.

Previously, on mv88e6xxx, this meant that in the following setup:

     br0
     /
  team0
   / \
swp0 swp1

If vlan filtering was enabled on br0, swp0's and swp1's QMode was set
to "secure". This caused all untagged packets to be dropped, as their
default VID (0) was not loaded into the VTU.

Signed-off-by: Tobias Waldekranz <tobias@...dekranz.com>
---
 net/dsa/slave.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/net/dsa/slave.c b/net/dsa/slave.c
index 5a1769602e65..e53c8ca6eb66 100644
--- a/net/dsa/slave.c
+++ b/net/dsa/slave.c
@@ -273,6 +273,9 @@ static int dsa_slave_port_attr_set(struct net_device *dev,
 	struct dsa_port *dp = dsa_slave_to_port(dev);
 	int ret;
 
+	if (attr->orig_dev != dev)
+		return -EOPNOTSUPP;
+
 	switch (attr->id) {
 	case SWITCHDEV_ATTR_ID_PORT_STP_STATE:
 		ret = dsa_port_set_state(dp, attr->u.stp_state);
-- 
2.17.1