| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20210113040040.50813-12-dsahern@kernel.org>
Date: Tue, 12 Jan 2021 21:00:38 -0700
From: David Ahern <dsahern@...nel.org>
To: netdev@...r.kernel.org
Cc: davem@...emloft.net, kuba@...nel.org, schoen@...alty.org,
David Ahern <dsahern@...il.com>
Subject: [PATCH net-next v3 11/13] selftests: Add separate options for server device bindings
From: David Ahern <dsahern@...il.com>
Add new options to nettest to specify device binding and expected
device binding for server mode, and update fcnal-test script. This
is needed to allow a single instance of nettest running both server
and client modes to use different device bindings.
Signed-off-by: David Ahern <dsahern@...il.com>
---
tools/testing/selftests/net/fcnal-test.sh | 282 +++++++++++-----------
tools/testing/selftests/net/nettest.c | 14 +-
2 files changed, 154 insertions(+), 142 deletions(-)
diff --git a/tools/testing/selftests/net/fcnal-test.sh b/tools/testing/selftests/net/fcnal-test.sh
index 5d15ded2433b..2514a9cb9530 100755
--- a/tools/testing/selftests/net/fcnal-test.sh
+++ b/tools/testing/selftests/net/fcnal-test.sh
@@ -869,7 +869,7 @@ ipv4_tcp_md5()
# basic use case
log_start
- run_cmd nettest -s -d ${VRF} -M ${MD5_PW} -m ${NSB_IP} &
+ run_cmd nettest -s -I ${VRF} -M ${MD5_PW} -m ${NSB_IP} &
sleep 1
run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_PW}
log_test $? 0 "MD5: VRF: Single address config"
@@ -877,7 +877,7 @@ ipv4_tcp_md5()
# client sends MD5, server not configured
log_start
show_hint "Should timeout since server does not have MD5 auth"
- run_cmd nettest -s -d ${VRF} &
+ run_cmd nettest -s -I ${VRF} &
sleep 1
run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_PW}
log_test $? 2 "MD5: VRF: Server no config, client uses password"
@@ -885,7 +885,7 @@ ipv4_tcp_md5()
# wrong password
log_start
show_hint "Should timeout since client uses wrong password"
- run_cmd nettest -s -d ${VRF} -M ${MD5_PW} -m ${NSB_IP} &
+ run_cmd nettest -s -I ${VRF} -M ${MD5_PW} -m ${NSB_IP} &
sleep 1
run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_WRONG_PW}
log_test $? 2 "MD5: VRF: Client uses wrong password"
@@ -893,7 +893,7 @@ ipv4_tcp_md5()
# client from different address
log_start
show_hint "Should timeout since server config differs from client"
- run_cmd nettest -s -d ${VRF} -M ${MD5_PW} -m ${NSB_LO_IP} &
+ run_cmd nettest -s -I ${VRF} -M ${MD5_PW} -m ${NSB_LO_IP} &
sleep 1
run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_PW}
log_test $? 2 "MD5: VRF: Client address does not match address configured with password"
@@ -904,7 +904,7 @@ ipv4_tcp_md5()
# client in prefix
log_start
- run_cmd nettest -s -d ${VRF} -M ${MD5_PW} -m ${NS_NET} &
+ run_cmd nettest -s -I ${VRF} -M ${MD5_PW} -m ${NS_NET} &
sleep 1
run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_PW}
log_test $? 0 "MD5: VRF: Prefix config"
@@ -912,7 +912,7 @@ ipv4_tcp_md5()
# client in prefix, wrong password
log_start
show_hint "Should timeout since client uses wrong password"
- run_cmd nettest -s -d ${VRF} -M ${MD5_PW} -m ${NS_NET} &
+ run_cmd nettest -s -I ${VRF} -M ${MD5_PW} -m ${NS_NET} &
sleep 1
run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_WRONG_PW}
log_test $? 2 "MD5: VRF: Prefix config, client uses wrong password"
@@ -920,7 +920,7 @@ ipv4_tcp_md5()
# client outside of prefix
log_start
show_hint "Should timeout since client address is outside of prefix"
- run_cmd nettest -s -d ${VRF} -M ${MD5_PW} -m ${NS_NET} &
+ run_cmd nettest -s -I ${VRF} -M ${MD5_PW} -m ${NS_NET} &
sleep 1
run_cmd_nsb nettest -l ${NSB_LO_IP} -r ${NSA_IP} -X ${MD5_PW}
log_test $? 2 "MD5: VRF: Prefix config, client address not in configured prefix"
@@ -930,14 +930,14 @@ ipv4_tcp_md5()
#
log_start
- run_cmd nettest -s -d ${VRF} -M ${MD5_PW} -m ${NSB_IP} &
+ run_cmd nettest -s -I ${VRF} -M ${MD5_PW} -m ${NSB_IP} &
run_cmd nettest -s -M ${MD5_WRONG_PW} -m ${NSB_IP} &
sleep 1
run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_PW}
log_test $? 0 "MD5: VRF: Single address config in default VRF and VRF, conn in VRF"
log_start
- run_cmd nettest -s -d ${VRF} -M ${MD5_PW} -m ${NSB_IP} &
+ run_cmd nettest -s -I ${VRF} -M ${MD5_PW} -m ${NSB_IP} &
run_cmd nettest -s -M ${MD5_WRONG_PW} -m ${NSB_IP} &
sleep 1
run_cmd_nsc nettest -r ${NSA_IP} -X ${MD5_WRONG_PW}
@@ -945,7 +945,7 @@ ipv4_tcp_md5()
log_start
show_hint "Should timeout since client in default VRF uses VRF password"
- run_cmd nettest -s -d ${VRF} -M ${MD5_PW} -m ${NSB_IP} &
+ run_cmd nettest -s -I ${VRF} -M ${MD5_PW} -m ${NSB_IP} &
run_cmd nettest -s -M ${MD5_WRONG_PW} -m ${NSB_IP} &
sleep 1
run_cmd_nsc nettest -r ${NSA_IP} -X ${MD5_PW}
@@ -953,21 +953,21 @@ ipv4_tcp_md5()
log_start
show_hint "Should timeout since client in VRF uses default VRF password"
- run_cmd nettest -s -d ${VRF} -M ${MD5_PW} -m ${NSB_IP} &
+ run_cmd nettest -s -I ${VRF} -M ${MD5_PW} -m ${NSB_IP} &
run_cmd nettest -s -M ${MD5_WRONG_PW} -m ${NSB_IP} &
sleep 1
run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_WRONG_PW}
log_test $? 2 "MD5: VRF: Single address config in default VRF and VRF, conn in VRF with default VRF pw"
log_start
- run_cmd nettest -s -d ${VRF} -M ${MD5_PW} -m ${NS_NET} &
+ run_cmd nettest -s -I ${VRF} -M ${MD5_PW} -m ${NS_NET} &
run_cmd nettest -s -M ${MD5_WRONG_PW} -m ${NS_NET} &
sleep 1
run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_PW}
log_test $? 0 "MD5: VRF: Prefix config in default VRF and VRF, conn in VRF"
log_start
- run_cmd nettest -s -d ${VRF} -M ${MD5_PW} -m ${NS_NET} &
+ run_cmd nettest -s -I ${VRF} -M ${MD5_PW} -m ${NS_NET} &
run_cmd nettest -s -M ${MD5_WRONG_PW} -m ${NS_NET} &
sleep 1
run_cmd_nsc nettest -r ${NSA_IP} -X ${MD5_WRONG_PW}
@@ -975,7 +975,7 @@ ipv4_tcp_md5()
log_start
show_hint "Should timeout since client in default VRF uses VRF password"
- run_cmd nettest -s -d ${VRF} -M ${MD5_PW} -m ${NS_NET} &
+ run_cmd nettest -s -I ${VRF} -M ${MD5_PW} -m ${NS_NET} &
run_cmd nettest -s -M ${MD5_WRONG_PW} -m ${NS_NET} &
sleep 1
run_cmd_nsc nettest -r ${NSA_IP} -X ${MD5_PW}
@@ -983,7 +983,7 @@ ipv4_tcp_md5()
log_start
show_hint "Should timeout since client in VRF uses default VRF password"
- run_cmd nettest -s -d ${VRF} -M ${MD5_PW} -m ${NS_NET} &
+ run_cmd nettest -s -I ${VRF} -M ${MD5_PW} -m ${NS_NET} &
run_cmd nettest -s -M ${MD5_WRONG_PW} -m ${NS_NET} &
sleep 1
run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_WRONG_PW}
@@ -993,11 +993,11 @@ ipv4_tcp_md5()
# negative tests
#
log_start
- run_cmd nettest -s -d ${NSA_DEV} -M ${MD5_PW} -m ${NSB_IP}
+ run_cmd nettest -s -I ${NSA_DEV} -M ${MD5_PW} -m ${NSB_IP}
log_test $? 1 "MD5: VRF: Device must be a VRF - single address"
log_start
- run_cmd nettest -s -d ${NSA_DEV} -M ${MD5_PW} -m ${NS_NET}
+ run_cmd nettest -s -I ${NSA_DEV} -M ${MD5_PW} -m ${NS_NET}
log_test $? 1 "MD5: VRF: Device must be a VRF - prefix"
}
@@ -1020,7 +1020,7 @@ ipv4_tcp_novrf()
a=${NSA_IP}
log_start
- run_cmd nettest -s -d ${NSA_DEV} &
+ run_cmd nettest -s -I ${NSA_DEV} &
sleep 1
run_cmd_nsb nettest -r ${a}
log_test_addr ${a} $? 0 "Device server"
@@ -1076,7 +1076,7 @@ ipv4_tcp_novrf()
a=${NSA_IP}
log_start
- run_cmd nettest -s -d ${NSA_DEV} &
+ run_cmd nettest -s -I ${NSA_DEV} &
sleep 1
run_cmd nettest -r ${a} -0 ${a}
log_test_addr ${a} $? 0 "Device server, unbound client, local connection"
@@ -1085,7 +1085,7 @@ ipv4_tcp_novrf()
do
log_start
show_hint "Should fail 'Connection refused' since addresses on loopback are out of device scope"
- run_cmd nettest -s -d ${NSA_DEV} &
+ run_cmd nettest -s -I ${NSA_DEV} &
sleep 1
run_cmd nettest -r ${a}
log_test_addr ${a} $? 1 "Device server, unbound client, local connection"
@@ -1110,7 +1110,7 @@ ipv4_tcp_novrf()
a=${NSA_IP}
log_start
- run_cmd nettest -s -d ${NSA_DEV} -2 ${NSA_DEV} &
+ run_cmd nettest -s -I ${NSA_DEV} -3 ${NSA_DEV} &
sleep 1
run_cmd nettest -d ${NSA_DEV} -r ${a} -0 ${a}
log_test_addr ${a} $? 0 "Device server, device client, local connection"
@@ -1145,13 +1145,13 @@ ipv4_tcp_vrf()
log_test_addr ${a} $? 1 "Global server"
log_start
- run_cmd nettest -s -d ${VRF} -2 ${VRF} &
+ run_cmd nettest -s -I ${VRF} -3 ${VRF} &
sleep 1
run_cmd_nsb nettest -r ${a}
log_test_addr ${a} $? 0 "VRF server"
log_start
- run_cmd nettest -s -d ${NSA_DEV} -2 ${NSA_DEV} &
+ run_cmd nettest -s -I ${NSA_DEV} -3 ${NSA_DEV} &
sleep 1
run_cmd_nsb nettest -r ${a}
log_test_addr ${a} $? 0 "Device server"
@@ -1186,14 +1186,14 @@ ipv4_tcp_vrf()
do
log_start
show_hint "client socket should be bound to VRF"
- run_cmd nettest -s -2 ${VRF} &
+ run_cmd nettest -s -3 ${VRF} &
sleep 1
run_cmd_nsb nettest -r ${a}
log_test_addr ${a} $? 0 "Global server"
log_start
show_hint "client socket should be bound to VRF"
- run_cmd nettest -s -d ${VRF} -2 ${VRF} &
+ run_cmd nettest -s -I ${VRF} -3 ${VRF} &
sleep 1
run_cmd_nsb nettest -r ${a}
log_test_addr ${a} $? 0 "VRF server"
@@ -1208,7 +1208,7 @@ ipv4_tcp_vrf()
a=${NSA_IP}
log_start
show_hint "client socket should be bound to device"
- run_cmd nettest -s -d ${NSA_DEV} -2 ${NSA_DEV} &
+ run_cmd nettest -s -I ${NSA_DEV} -3 ${NSA_DEV} &
sleep 1
run_cmd_nsb nettest -r ${a}
log_test_addr ${a} $? 0 "Device server"
@@ -1218,7 +1218,7 @@ ipv4_tcp_vrf()
do
log_start
show_hint "Should fail 'Connection refused' since client is not bound to VRF"
- run_cmd nettest -s -d ${VRF} &
+ run_cmd nettest -s -I ${VRF} &
sleep 1
run_cmd nettest -r ${a}
log_test_addr ${a} $? 1 "Global server, local connection"
@@ -1255,7 +1255,7 @@ ipv4_tcp_vrf()
for a in ${NSA_IP} ${VRF_IP} 127.0.0.1
do
log_start
- run_cmd nettest -s -d ${VRF} -2 ${VRF} &
+ run_cmd nettest -s -I ${VRF} -3 ${VRF} &
sleep 1
run_cmd nettest -r ${a} -d ${VRF} -0 ${a}
log_test_addr ${a} $? 0 "VRF server, VRF client, local connection"
@@ -1263,26 +1263,26 @@ ipv4_tcp_vrf()
a=${NSA_IP}
log_start
- run_cmd nettest -s -d ${VRF} -2 ${VRF} &
+ run_cmd nettest -s -I ${VRF} -3 ${VRF} &
sleep 1
run_cmd nettest -r ${a} -d ${NSA_DEV} -0 ${a}
log_test_addr ${a} $? 0 "VRF server, device client, local connection"
log_start
show_hint "Should fail 'No route to host' since client is out of VRF scope"
- run_cmd nettest -s -d ${VRF} &
+ run_cmd nettest -s -I ${VRF} &
sleep 1
run_cmd nettest -r ${a}
log_test_addr ${a} $? 1 "VRF server, unbound client, local connection"
log_start
- run_cmd nettest -s -d ${NSA_DEV} -2 ${NSA_DEV} &
+ run_cmd nettest -s -I ${NSA_DEV} -3 ${NSA_DEV} &
sleep 1
run_cmd nettest -r ${a} -d ${VRF} -0 ${a}
log_test_addr ${a} $? 0 "Device server, VRF client, local connection"
log_start
- run_cmd nettest -s -d ${NSA_DEV} -2 ${NSA_DEV} &
+ run_cmd nettest -s -I ${NSA_DEV} -3 ${NSA_DEV} &
sleep 1
run_cmd nettest -r ${a} -d ${NSA_DEV} -0 ${a}
log_test_addr ${a} $? 0 "Device server, device client, local connection"
@@ -1321,7 +1321,7 @@ ipv4_udp_novrf()
for a in ${NSA_IP} ${NSA_LO_IP}
do
log_start
- run_cmd nettest -D -s -2 ${NSA_DEV} &
+ run_cmd nettest -D -s -3 ${NSA_DEV} &
sleep 1
run_cmd_nsb nettest -D -r ${a}
log_test_addr ${a} $? 0 "Global server"
@@ -1334,7 +1334,7 @@ ipv4_udp_novrf()
a=${NSA_IP}
log_start
- run_cmd nettest -D -d ${NSA_DEV} -s -2 ${NSA_DEV} &
+ run_cmd nettest -D -I ${NSA_DEV} -s -3 ${NSA_DEV} &
sleep 1
run_cmd_nsb nettest -D -r ${a}
log_test_addr ${a} $? 0 "Device server"
@@ -1393,7 +1393,7 @@ ipv4_udp_novrf()
a=${NSA_IP}
log_start
- run_cmd nettest -s -D -d ${NSA_DEV} -2 ${NSA_DEV} &
+ run_cmd nettest -s -D -I ${NSA_DEV} -3 ${NSA_DEV} &
sleep 1
run_cmd nettest -D -r ${a}
log_test_addr ${a} $? 0 "Device server, unbound client, local connection"
@@ -1402,7 +1402,7 @@ ipv4_udp_novrf()
do
log_start
show_hint "Should fail 'Connection refused' since address is out of device scope"
- run_cmd nettest -s -D -d ${NSA_DEV} &
+ run_cmd nettest -s -D -I ${NSA_DEV} &
sleep 1
run_cmd nettest -D -r ${a}
log_test_addr ${a} $? 1 "Device server, unbound client, local connection"
@@ -1456,7 +1456,7 @@ ipv4_udp_novrf()
a=${NSA_IP}
log_start
- run_cmd nettest -D -s -d ${NSA_DEV} -2 ${NSA_DEV} &
+ run_cmd nettest -D -s -I ${NSA_DEV} -3 ${NSA_DEV} &
sleep 1
run_cmd nettest -D -d ${NSA_DEV} -r ${a} -0 ${a}
log_test_addr ${a} $? 0 "Device server, device client, local conn"
@@ -1487,13 +1487,13 @@ ipv4_udp_vrf()
log_test_addr ${a} $? 1 "Global server"
log_start
- run_cmd nettest -D -d ${VRF} -s -2 ${NSA_DEV} &
+ run_cmd nettest -D -I ${VRF} -s -3 ${NSA_DEV} &
sleep 1
run_cmd_nsb nettest -D -r ${a}
log_test_addr ${a} $? 0 "VRF server"
log_start
- run_cmd nettest -D -d ${NSA_DEV} -s -2 ${NSA_DEV} &
+ run_cmd nettest -D -I ${NSA_DEV} -s -3 ${NSA_DEV} &
sleep 1
run_cmd_nsb nettest -D -r ${a}
log_test_addr ${a} $? 0 "Enslaved device server"
@@ -1513,26 +1513,26 @@ ipv4_udp_vrf()
a=${NSA_IP}
log_start
- run_cmd nettest -s -D -d ${VRF} -2 ${NSA_DEV} &
+ run_cmd nettest -s -D -I ${VRF} -3 ${NSA_DEV} &
sleep 1
run_cmd nettest -D -d ${VRF} -r ${a}
log_test_addr ${a} $? 0 "VRF server, VRF client, local conn"
log_start
- run_cmd nettest -s -D -d ${VRF} -2 ${NSA_DEV} &
+ run_cmd nettest -s -D -I ${VRF} -3 ${NSA_DEV} &
sleep 1
run_cmd nettest -D -d ${NSA_DEV} -r ${a}
log_test_addr ${a} $? 0 "VRF server, enslaved device client, local connection"
a=${NSA_IP}
log_start
- run_cmd nettest -s -D -d ${NSA_DEV} -2 ${NSA_DEV} &
+ run_cmd nettest -s -D -I ${NSA_DEV} -3 ${NSA_DEV} &
sleep 1
run_cmd nettest -D -d ${VRF} -r ${a}
log_test_addr ${a} $? 0 "Enslaved device server, VRF client, local conn"
log_start
- run_cmd nettest -s -D -d ${NSA_DEV} -2 ${NSA_DEV} &
+ run_cmd nettest -s -D -I ${NSA_DEV} -3 ${NSA_DEV} &
sleep 1
run_cmd nettest -D -d ${NSA_DEV} -r ${a}
log_test_addr ${a} $? 0 "Enslaved device server, device client, local conn"
@@ -1547,19 +1547,19 @@ ipv4_udp_vrf()
for a in ${NSA_IP} ${VRF_IP}
do
log_start
- run_cmd nettest -D -s -2 ${NSA_DEV} &
+ run_cmd nettest -D -s -3 ${NSA_DEV} &
sleep 1
run_cmd_nsb nettest -D -r ${a}
log_test_addr ${a} $? 0 "Global server"
log_start
- run_cmd nettest -D -d ${VRF} -s -2 ${NSA_DEV} &
+ run_cmd nettest -D -I ${VRF} -s -3 ${NSA_DEV} &
sleep 1
run_cmd_nsb nettest -D -r ${a}
log_test_addr ${a} $? 0 "VRF server"
log_start
- run_cmd nettest -D -d ${NSA_DEV} -s -2 ${NSA_DEV} &
+ run_cmd nettest -D -I ${NSA_DEV} -s -3 ${NSA_DEV} &
sleep 1
run_cmd_nsb nettest -D -r ${a}
log_test_addr ${a} $? 0 "Enslaved device server"
@@ -1601,31 +1601,31 @@ ipv4_udp_vrf()
#
a=${NSA_IP}
log_start
- run_cmd nettest -D -s -2 ${NSA_DEV} &
+ run_cmd nettest -D -s -3 ${NSA_DEV} &
sleep 1
run_cmd nettest -D -d ${VRF} -r ${a}
log_test_addr ${a} $? 0 "Global server, VRF client, local conn"
log_start
- run_cmd nettest -s -D -d ${VRF} -2 ${NSA_DEV} &
+ run_cmd nettest -s -D -I ${VRF} -3 ${NSA_DEV} &
sleep 1
run_cmd nettest -D -d ${VRF} -r ${a}
log_test_addr ${a} $? 0 "VRF server, VRF client, local conn"
log_start
- run_cmd nettest -s -D -d ${VRF} -2 ${NSA_DEV} &
+ run_cmd nettest -s -D -I ${VRF} -3 ${NSA_DEV} &
sleep 1
run_cmd nettest -D -d ${NSA_DEV} -r ${a}
log_test_addr ${a} $? 0 "VRF server, device client, local conn"
log_start
- run_cmd nettest -s -D -d ${NSA_DEV} -2 ${NSA_DEV} &
+ run_cmd nettest -s -D -I ${NSA_DEV} -3 ${NSA_DEV} &
sleep 1
run_cmd nettest -D -d ${VRF} -r ${a}
log_test_addr ${a} $? 0 "Enslaved device server, VRF client, local conn"
log_start
- run_cmd nettest -s -D -d ${NSA_DEV} -2 ${NSA_DEV} &
+ run_cmd nettest -s -D -I ${NSA_DEV} -3 ${NSA_DEV} &
sleep 1
run_cmd nettest -D -d ${NSA_DEV} -r ${a}
log_test_addr ${a} $? 0 "Enslaved device server, device client, local conn"
@@ -1633,7 +1633,7 @@ ipv4_udp_vrf()
for a in ${VRF_IP} 127.0.0.1
do
log_start
- run_cmd nettest -D -s -2 ${VRF} &
+ run_cmd nettest -D -s -3 ${VRF} &
sleep 1
run_cmd nettest -D -d ${VRF} -r ${a}
log_test_addr ${a} $? 0 "Global server, VRF client, local conn"
@@ -1642,7 +1642,7 @@ ipv4_udp_vrf()
for a in ${VRF_IP} 127.0.0.1
do
log_start
- run_cmd nettest -s -D -d ${VRF} -2 ${VRF} &
+ run_cmd nettest -s -D -I ${VRF} -3 ${VRF} &
sleep 1
run_cmd nettest -D -d ${VRF} -r ${a}
log_test_addr ${a} $? 0 "VRF server, VRF client, local conn"
@@ -1697,7 +1697,7 @@ ipv4_addr_bind_novrf()
log_test_addr ${a} $? 0 "Raw socket bind to local address"
log_start
- run_cmd nettest -s -R -P icmp -l ${a} -d ${NSA_DEV} -b
+ run_cmd nettest -s -R -P icmp -l ${a} -I ${NSA_DEV} -b
log_test_addr ${a} $? 0 "Raw socket bind to local address after device bind"
done
@@ -1720,7 +1720,7 @@ ipv4_addr_bind_novrf()
#a=${NSA_LO_IP}
#log_start
#show_hint "Should fail with 'Cannot assign requested address'"
- #run_cmd nettest -s -l ${a} -d ${NSA_DEV} -t1 -b
+ #run_cmd nettest -s -l ${a} -I ${NSA_DEV} -t1 -b
#log_test_addr ${a} $? 1 "TCP socket bind to out of scope local address"
}
@@ -1736,17 +1736,17 @@ ipv4_addr_bind_vrf()
log_test_addr ${a} $? 0 "Raw socket bind to local address"
log_start
- run_cmd nettest -s -R -P icmp -l ${a} -d ${NSA_DEV} -b
+ run_cmd nettest -s -R -P icmp -l ${a} -I ${NSA_DEV} -b
log_test_addr ${a} $? 0 "Raw socket bind to local address after device bind"
log_start
- run_cmd nettest -s -R -P icmp -l ${a} -d ${VRF} -b
+ run_cmd nettest -s -R -P icmp -l ${a} -I ${VRF} -b
log_test_addr ${a} $? 0 "Raw socket bind to local address after VRF bind"
done
a=${NSA_LO_IP}
log_start
show_hint "Address on loopback is out of VRF scope"
- run_cmd nettest -s -R -P icmp -l ${a} -d ${VRF} -b
+ run_cmd nettest -s -R -P icmp -l ${a} -I ${VRF} -b
log_test_addr ${a} $? 1 "Raw socket bind to out of scope address after VRF bind"
#
@@ -1755,23 +1755,23 @@ ipv4_addr_bind_vrf()
for a in ${NSA_IP} ${VRF_IP}
do
log_start
- run_cmd nettest -s -l ${a} -d ${VRF} -t1 -b
+ run_cmd nettest -s -l ${a} -I ${VRF} -t1 -b
log_test_addr ${a} $? 0 "TCP socket bind to local address"
log_start
- run_cmd nettest -s -l ${a} -d ${NSA_DEV} -t1 -b
+ run_cmd nettest -s -l ${a} -I ${NSA_DEV} -t1 -b
log_test_addr ${a} $? 0 "TCP socket bind to local address after device bind"
done
a=${NSA_LO_IP}
log_start
show_hint "Address on loopback out of scope for VRF"
- run_cmd nettest -s -l ${a} -d ${VRF} -t1 -b
+ run_cmd nettest -s -l ${a} -I ${VRF} -t1 -b
log_test_addr ${a} $? 1 "TCP socket bind to invalid local address for VRF"
log_start
show_hint "Address on loopback out of scope for device in VRF"
- run_cmd nettest -s -l ${a} -d ${NSA_DEV} -t1 -b
+ run_cmd nettest -s -l ${a} -I ${NSA_DEV} -t1 -b
log_test_addr ${a} $? 1 "TCP socket bind to invalid local address for device bind"
}
@@ -1818,7 +1818,7 @@ ipv4_rt()
for a in ${NSA_IP} ${VRF_IP}
do
log_start
- run_cmd nettest ${varg} -s -d ${VRF} &
+ run_cmd nettest ${varg} -s -I ${VRF} &
sleep 1
run_cmd_nsb nettest ${varg} -r ${a} &
sleep 3
@@ -1831,7 +1831,7 @@ ipv4_rt()
a=${NSA_IP}
log_start
- run_cmd nettest ${varg} -s -d ${NSA_DEV} &
+ run_cmd nettest ${varg} -s -I ${NSA_DEV} &
sleep 1
run_cmd_nsb nettest ${varg} -r ${a} &
sleep 3
@@ -1886,7 +1886,7 @@ ipv4_rt()
for a in ${NSA_IP} ${VRF_IP}
do
log_start
- run_cmd nettest ${varg} -d ${VRF} -s &
+ run_cmd nettest ${varg} -I ${VRF} -s &
sleep 1
run_cmd nettest ${varg} -d ${VRF} -r ${a} &
sleep 3
@@ -1910,7 +1910,7 @@ ipv4_rt()
setup ${with_vrf}
log_start
- run_cmd nettest ${varg} -d ${VRF} -s &
+ run_cmd nettest ${varg} -I ${VRF} -s &
sleep 1
run_cmd nettest ${varg} -d ${NSA_DEV} -r ${a} &
sleep 3
@@ -1921,7 +1921,7 @@ ipv4_rt()
setup ${with_vrf}
log_start
- run_cmd nettest ${varg} -d ${NSA_DEV} -s &
+ run_cmd nettest ${varg} -I ${NSA_DEV} -s &
sleep 1
run_cmd nettest ${varg} -d ${NSA_DEV} -r ${a} &
sleep 3
@@ -2333,7 +2333,7 @@ ipv6_tcp_md5()
# basic use case
log_start
- run_cmd nettest -6 -s -d ${VRF} -M ${MD5_PW} -m ${NSB_IP6} &
+ run_cmd nettest -6 -s -I ${VRF} -M ${MD5_PW} -m ${NSB_IP6} &
sleep 1
run_cmd_nsb nettest -6 -r ${NSA_IP6} -X ${MD5_PW}
log_test $? 0 "MD5: VRF: Single address config"
@@ -2341,7 +2341,7 @@ ipv6_tcp_md5()
# client sends MD5, server not configured
log_start
show_hint "Should timeout since server does not have MD5 auth"
- run_cmd nettest -6 -s -d ${VRF} &
+ run_cmd nettest -6 -s -I ${VRF} &
sleep 1
run_cmd_nsb nettest -6 -r ${NSA_IP6} -X ${MD5_PW}
log_test $? 2 "MD5: VRF: Server no config, client uses password"
@@ -2349,7 +2349,7 @@ ipv6_tcp_md5()
# wrong password
log_start
show_hint "Should timeout since client uses wrong password"
- run_cmd nettest -6 -s -d ${VRF} -M ${MD5_PW} -m ${NSB_IP6} &
+ run_cmd nettest -6 -s -I ${VRF} -M ${MD5_PW} -m ${NSB_IP6} &
sleep 1
run_cmd_nsb nettest -6 -r ${NSA_IP6} -X ${MD5_WRONG_PW}
log_test $? 2 "MD5: VRF: Client uses wrong password"
@@ -2357,7 +2357,7 @@ ipv6_tcp_md5()
# client from different address
log_start
show_hint "Should timeout since server config differs from client"
- run_cmd nettest -6 -s -d ${VRF} -M ${MD5_PW} -m ${NSB_LO_IP6} &
+ run_cmd nettest -6 -s -I ${VRF} -M ${MD5_PW} -m ${NSB_LO_IP6} &
sleep 1
run_cmd_nsb nettest -6 -r ${NSA_IP6} -X ${MD5_PW}
log_test $? 2 "MD5: VRF: Client address does not match address configured with password"
@@ -2368,7 +2368,7 @@ ipv6_tcp_md5()
# client in prefix
log_start
- run_cmd nettest -6 -s -d ${VRF} -M ${MD5_PW} -m ${NS_NET6} &
+ run_cmd nettest -6 -s -I ${VRF} -M ${MD5_PW} -m ${NS_NET6} &
sleep 1
run_cmd_nsb nettest -6 -r ${NSA_IP6} -X ${MD5_PW}
log_test $? 0 "MD5: VRF: Prefix config"
@@ -2376,7 +2376,7 @@ ipv6_tcp_md5()
# client in prefix, wrong password
log_start
show_hint "Should timeout since client uses wrong password"
- run_cmd nettest -6 -s -d ${VRF} -M ${MD5_PW} -m ${NS_NET6} &
+ run_cmd nettest -6 -s -I ${VRF} -M ${MD5_PW} -m ${NS_NET6} &
sleep 1
run_cmd_nsb nettest -6 -r ${NSA_IP6} -X ${MD5_WRONG_PW}
log_test $? 2 "MD5: VRF: Prefix config, client uses wrong password"
@@ -2384,7 +2384,7 @@ ipv6_tcp_md5()
# client outside of prefix
log_start
show_hint "Should timeout since client address is outside of prefix"
- run_cmd nettest -6 -s -d ${VRF} -M ${MD5_PW} -m ${NS_NET6} &
+ run_cmd nettest -6 -s -I ${VRF} -M ${MD5_PW} -m ${NS_NET6} &
sleep 1
run_cmd_nsb nettest -6 -l ${NSB_LO_IP6} -r ${NSA_IP6} -X ${MD5_PW}
log_test $? 2 "MD5: VRF: Prefix config, client address not in configured prefix"
@@ -2394,14 +2394,14 @@ ipv6_tcp_md5()
#
log_start
- run_cmd nettest -6 -s -d ${VRF} -M ${MD5_PW} -m ${NSB_IP6} &
+ run_cmd nettest -6 -s -I ${VRF} -M ${MD5_PW} -m ${NSB_IP6} &
run_cmd nettest -6 -s -M ${MD5_WRONG_PW} -m ${NSB_IP6} &
sleep 1
run_cmd_nsb nettest -6 -r ${NSA_IP6} -X ${MD5_PW}
log_test $? 0 "MD5: VRF: Single address config in default VRF and VRF, conn in VRF"
log_start
- run_cmd nettest -6 -s -d ${VRF} -M ${MD5_PW} -m ${NSB_IP6} &
+ run_cmd nettest -6 -s -I ${VRF} -M ${MD5_PW} -m ${NSB_IP6} &
run_cmd nettest -6 -s -M ${MD5_WRONG_PW} -m ${NSB_IP6} &
sleep 1
run_cmd_nsc nettest -6 -r ${NSA_IP6} -X ${MD5_WRONG_PW}
@@ -2409,7 +2409,7 @@ ipv6_tcp_md5()
log_start
show_hint "Should timeout since client in default VRF uses VRF password"
- run_cmd nettest -6 -s -d ${VRF} -M ${MD5_PW} -m ${NSB_IP6} &
+ run_cmd nettest -6 -s -I ${VRF} -M ${MD5_PW} -m ${NSB_IP6} &
run_cmd nettest -6 -s -M ${MD5_WRONG_PW} -m ${NSB_IP6} &
sleep 1
run_cmd_nsc nettest -6 -r ${NSA_IP6} -X ${MD5_PW}
@@ -2417,21 +2417,21 @@ ipv6_tcp_md5()
log_start
show_hint "Should timeout since client in VRF uses default VRF password"
- run_cmd nettest -6 -s -d ${VRF} -M ${MD5_PW} -m ${NSB_IP6} &
+ run_cmd nettest -6 -s -I ${VRF} -M ${MD5_PW} -m ${NSB_IP6} &
run_cmd nettest -6 -s -M ${MD5_WRONG_PW} -m ${NSB_IP6} &
sleep 1
run_cmd_nsb nettest -6 -r ${NSA_IP6} -X ${MD5_WRONG_PW}
log_test $? 2 "MD5: VRF: Single address config in default VRF and VRF, conn in VRF with default VRF pw"
log_start
- run_cmd nettest -6 -s -d ${VRF} -M ${MD5_PW} -m ${NS_NET6} &
+ run_cmd nettest -6 -s -I ${VRF} -M ${MD5_PW} -m ${NS_NET6} &
run_cmd nettest -6 -s -M ${MD5_WRONG_PW} -m ${NS_NET6} &
sleep 1
run_cmd_nsb nettest -6 -r ${NSA_IP6} -X ${MD5_PW}
log_test $? 0 "MD5: VRF: Prefix config in default VRF and VRF, conn in VRF"
log_start
- run_cmd nettest -6 -s -d ${VRF} -M ${MD5_PW} -m ${NS_NET6} &
+ run_cmd nettest -6 -s -I ${VRF} -M ${MD5_PW} -m ${NS_NET6} &
run_cmd nettest -6 -s -M ${MD5_WRONG_PW} -m ${NS_NET6} &
sleep 1
run_cmd_nsc nettest -6 -r ${NSA_IP6} -X ${MD5_WRONG_PW}
@@ -2439,7 +2439,7 @@ ipv6_tcp_md5()
log_start
show_hint "Should timeout since client in default VRF uses VRF password"
- run_cmd nettest -6 -s -d ${VRF} -M ${MD5_PW} -m ${NS_NET6} &
+ run_cmd nettest -6 -s -I ${VRF} -M ${MD5_PW} -m ${NS_NET6} &
run_cmd nettest -6 -s -M ${MD5_WRONG_PW} -m ${NS_NET6} &
sleep 1
run_cmd_nsc nettest -6 -r ${NSA_IP6} -X ${MD5_PW}
@@ -2447,7 +2447,7 @@ ipv6_tcp_md5()
log_start
show_hint "Should timeout since client in VRF uses default VRF password"
- run_cmd nettest -6 -s -d ${VRF} -M ${MD5_PW} -m ${NS_NET6} &
+ run_cmd nettest -6 -s -I ${VRF} -M ${MD5_PW} -m ${NS_NET6} &
run_cmd nettest -6 -s -M ${MD5_WRONG_PW} -m ${NS_NET6} &
sleep 1
run_cmd_nsb nettest -6 -r ${NSA_IP6} -X ${MD5_WRONG_PW}
@@ -2457,11 +2457,11 @@ ipv6_tcp_md5()
# negative tests
#
log_start
- run_cmd nettest -6 -s -d ${NSA_DEV} -M ${MD5_PW} -m ${NSB_IP6}
+ run_cmd nettest -6 -s -I ${NSA_DEV} -M ${MD5_PW} -m ${NSB_IP6}
log_test $? 1 "MD5: VRF: Device must be a VRF - single address"
log_start
- run_cmd nettest -6 -s -d ${NSA_DEV} -M ${MD5_PW} -m ${NS_NET6}
+ run_cmd nettest -6 -s -I ${NSA_DEV} -M ${MD5_PW} -m ${NS_NET6}
log_test $? 1 "MD5: VRF: Device must be a VRF - prefix"
}
@@ -2534,7 +2534,7 @@ ipv6_tcp_novrf()
a=${NSA_IP6}
log_start
- run_cmd nettest -6 -s -d ${NSA_DEV} -2 ${NSA_DEV} &
+ run_cmd nettest -6 -s -I ${NSA_DEV} -3 ${NSA_DEV} &
sleep 1
run_cmd nettest -6 -r ${a} -0 ${a}
log_test_addr ${a} $? 0 "Device server, unbound client, local connection"
@@ -2543,7 +2543,7 @@ ipv6_tcp_novrf()
do
log_start
show_hint "Should fail 'Connection refused' since addresses on loopback are out of device scope"
- run_cmd nettest -6 -s -d ${NSA_DEV} &
+ run_cmd nettest -6 -s -I ${NSA_DEV} &
sleep 1
run_cmd nettest -6 -r ${a}
log_test_addr ${a} $? 1 "Device server, unbound client, local connection"
@@ -2569,7 +2569,7 @@ ipv6_tcp_novrf()
for a in ${NSA_IP6} ${NSA_LINKIP6}
do
log_start
- run_cmd nettest -6 -s -d ${NSA_DEV} -2 ${NSA_DEV} &
+ run_cmd nettest -6 -s -I ${NSA_DEV} -3 ${NSA_DEV} &
sleep 1
run_cmd nettest -6 -d ${NSA_DEV} -r ${a}
log_test_addr ${a} $? 0 "Device server, device client, local conn"
@@ -2611,7 +2611,7 @@ ipv6_tcp_vrf()
for a in ${NSA_IP6} ${VRF_IP6}
do
log_start
- run_cmd nettest -6 -s -d ${VRF} -2 ${VRF} &
+ run_cmd nettest -6 -s -I ${VRF} -3 ${VRF} &
sleep 1
run_cmd_nsb nettest -6 -r ${a}
log_test_addr ${a} $? 0 "VRF server"
@@ -2620,7 +2620,7 @@ ipv6_tcp_vrf()
# link local is always bound to ingress device
a=${NSA_LINKIP6}%${NSB_DEV}
log_start
- run_cmd nettest -6 -s -d ${VRF} -2 ${NSA_DEV} &
+ run_cmd nettest -6 -s -I ${VRF} -3 ${NSA_DEV} &
sleep 1
run_cmd_nsb nettest -6 -r ${a}
log_test_addr ${a} $? 0 "VRF server"
@@ -2628,7 +2628,7 @@ ipv6_tcp_vrf()
for a in ${NSA_IP6} ${VRF_IP6} ${NSA_LINKIP6}%${NSB_DEV}
do
log_start
- run_cmd nettest -6 -s -d ${NSA_DEV} -2 ${NSA_DEV} &
+ run_cmd nettest -6 -s -I ${NSA_DEV} -3 ${NSA_DEV} &
sleep 1
run_cmd_nsb nettest -6 -r ${a}
log_test_addr ${a} $? 0 "Device server"
@@ -2664,7 +2664,7 @@ ipv6_tcp_vrf()
for a in ${NSA_IP6} ${VRF_IP6}
do
log_start
- run_cmd nettest -6 -s -2 ${VRF} &
+ run_cmd nettest -6 -s -3 ${VRF} &
sleep 1
run_cmd_nsb nettest -6 -r ${a}
log_test_addr ${a} $? 0 "Global server"
@@ -2673,7 +2673,7 @@ ipv6_tcp_vrf()
for a in ${NSA_IP6} ${VRF_IP6}
do
log_start
- run_cmd nettest -6 -s -d ${VRF} -2 ${VRF} &
+ run_cmd nettest -6 -s -I ${VRF} -3 ${VRF} &
sleep 1
run_cmd_nsb nettest -6 -r ${a}
log_test_addr ${a} $? 0 "VRF server"
@@ -2682,13 +2682,13 @@ ipv6_tcp_vrf()
# For LLA, child socket is bound to device
a=${NSA_LINKIP6}%${NSB_DEV}
log_start
- run_cmd nettest -6 -s -2 ${NSA_DEV} &
+ run_cmd nettest -6 -s -3 ${NSA_DEV} &
sleep 1
run_cmd_nsb nettest -6 -r ${a}
log_test_addr ${a} $? 0 "Global server"
log_start
- run_cmd nettest -6 -s -d ${VRF} -2 ${NSA_DEV} &
+ run_cmd nettest -6 -s -I ${VRF} -3 ${NSA_DEV} &
sleep 1
run_cmd_nsb nettest -6 -r ${a}
log_test_addr ${a} $? 0 "VRF server"
@@ -2696,7 +2696,7 @@ ipv6_tcp_vrf()
for a in ${NSA_IP6} ${NSA_LINKIP6}%${NSB_DEV}
do
log_start
- run_cmd nettest -6 -s -d ${NSA_DEV} -2 ${NSA_DEV} &
+ run_cmd nettest -6 -s -I ${NSA_DEV} -3 ${NSA_DEV} &
sleep 1
run_cmd_nsb nettest -6 -r ${a}
log_test_addr ${a} $? 0 "Device server"
@@ -2716,7 +2716,7 @@ ipv6_tcp_vrf()
do
log_start
show_hint "Fails 'Connection refused' since client is not in VRF"
- run_cmd nettest -6 -s -d ${VRF} &
+ run_cmd nettest -6 -s -I ${VRF} &
sleep 1
run_cmd nettest -6 -r ${a}
log_test_addr ${a} $? 1 "Global server, local connection"
@@ -2771,7 +2771,7 @@ ipv6_tcp_vrf()
for a in ${NSA_IP6} ${VRF_IP6} ::1
do
log_start
- run_cmd nettest -6 -s -d ${VRF} -2 ${VRF} &
+ run_cmd nettest -6 -s -I ${VRF} -3 ${VRF} &
sleep 1
run_cmd nettest -6 -r ${a} -d ${VRF} -0 ${a}
log_test_addr ${a} $? 0 "VRF server, VRF client, local connection"
@@ -2779,7 +2779,7 @@ ipv6_tcp_vrf()
a=${NSA_IP6}
log_start
- run_cmd nettest -6 -s -d ${VRF} -2 ${VRF} &
+ run_cmd nettest -6 -s -I ${VRF} -3 ${VRF} &
sleep 1
run_cmd nettest -6 -r ${a} -d ${NSA_DEV} -0 ${a}
log_test_addr ${a} $? 0 "VRF server, device client, local connection"
@@ -2787,13 +2787,13 @@ ipv6_tcp_vrf()
a=${NSA_IP6}
log_start
show_hint "Should fail since unbound client is out of VRF scope"
- run_cmd nettest -6 -s -d ${VRF} &
+ run_cmd nettest -6 -s -I ${VRF} &
sleep 1
run_cmd nettest -6 -r ${a}
log_test_addr ${a} $? 1 "VRF server, unbound client, local connection"
log_start
- run_cmd nettest -6 -s -d ${NSA_DEV} -2 ${NSA_DEV} &
+ run_cmd nettest -6 -s -I ${NSA_DEV} -3 ${NSA_DEV} &
sleep 1
run_cmd nettest -6 -r ${a} -d ${VRF} -0 ${a}
log_test_addr ${a} $? 0 "Device server, VRF client, local connection"
@@ -2801,7 +2801,7 @@ ipv6_tcp_vrf()
for a in ${NSA_IP6} ${NSA_LINKIP6}
do
log_start
- run_cmd nettest -6 -s -d ${NSA_DEV} -2 ${NSA_DEV} &
+ run_cmd nettest -6 -s -I ${NSA_DEV} -3 ${NSA_DEV} &
sleep 1
run_cmd nettest -6 -r ${a} -d ${NSA_DEV} -0 ${a}
log_test_addr ${a} $? 0 "Device server, device client, local connection"
@@ -2841,13 +2841,13 @@ ipv6_udp_novrf()
for a in ${NSA_IP6} ${NSA_LINKIP6}%${NSB_DEV}
do
log_start
- run_cmd nettest -6 -D -s -2 ${NSA_DEV} &
+ run_cmd nettest -6 -D -s -3 ${NSA_DEV} &
sleep 1
run_cmd_nsb nettest -6 -D -r ${a}
log_test_addr ${a} $? 0 "Global server"
log_start
- run_cmd nettest -6 -D -d ${NSA_DEV} -s -2 ${NSA_DEV} &
+ run_cmd nettest -6 -D -I ${NSA_DEV} -s -3 ${NSA_DEV} &
sleep 1
run_cmd_nsb nettest -6 -D -r ${a}
log_test_addr ${a} $? 0 "Device server"
@@ -2855,7 +2855,7 @@ ipv6_udp_novrf()
a=${NSA_LO_IP6}
log_start
- run_cmd nettest -6 -D -s -2 ${NSA_DEV} &
+ run_cmd nettest -6 -D -s -3 ${NSA_DEV} &
sleep 1
run_cmd_nsb nettest -6 -D -r ${a}
log_test_addr ${a} $? 0 "Global server"
@@ -2865,7 +2865,7 @@ ipv6_udp_novrf()
# behavior.
#log_start
#show_hint "Should fail since loopback address is out of scope"
- #run_cmd nettest -6 -D -d ${NSA_DEV} -s -2 ${NSA_DEV} &
+ #run_cmd nettest -6 -D -I ${NSA_DEV} -s -3 ${NSA_DEV} &
#sleep 1
#run_cmd_nsb nettest -6 -D -r ${a}
#log_test_addr ${a} $? 1 "Device server"
@@ -2933,7 +2933,7 @@ ipv6_udp_novrf()
a=${NSA_IP6}
log_start
- run_cmd nettest -6 -s -D -d ${NSA_DEV} -2 ${NSA_DEV} &
+ run_cmd nettest -6 -s -D -I ${NSA_DEV} -3 ${NSA_DEV} &
sleep 1
run_cmd nettest -6 -D -r ${a}
log_test_addr ${a} $? 0 "Device server, unbound client, local connection"
@@ -2942,7 +2942,7 @@ ipv6_udp_novrf()
do
log_start
show_hint "Should fail 'Connection refused' since address is out of device scope"
- run_cmd nettest -6 -s -D -d ${NSA_DEV} &
+ run_cmd nettest -6 -s -D -I ${NSA_DEV} &
sleep 1
run_cmd nettest -6 -D -r ${a}
log_test_addr ${a} $? 1 "Device server, local connection"
@@ -2993,7 +2993,7 @@ ipv6_udp_novrf()
a=${NSA_IP6}
log_start
- run_cmd nettest -6 -D -s -d ${NSA_DEV} -2 ${NSA_DEV} &
+ run_cmd nettest -6 -D -s -I ${NSA_DEV} -3 ${NSA_DEV} &
sleep 1
run_cmd nettest -6 -D -d ${NSA_DEV} -r ${a} -0 ${a}
log_test_addr ${a} $? 0 "Device server, device client, local conn"
@@ -3040,7 +3040,7 @@ ipv6_udp_vrf()
for a in ${NSA_IP6} ${VRF_IP6}
do
log_start
- run_cmd nettest -6 -D -d ${VRF} -s -2 ${NSA_DEV} &
+ run_cmd nettest -6 -D -I ${VRF} -s -3 ${NSA_DEV} &
sleep 1
run_cmd_nsb nettest -6 -D -r ${a}
log_test_addr ${a} $? 0 "VRF server"
@@ -3049,7 +3049,7 @@ ipv6_udp_vrf()
for a in ${NSA_IP6} ${VRF_IP6}
do
log_start
- run_cmd nettest -6 -D -d ${NSA_DEV} -s -2 ${NSA_DEV} &
+ run_cmd nettest -6 -D -I ${NSA_DEV} -s -3 ${NSA_DEV} &
sleep 1
run_cmd_nsb nettest -6 -D -r ${a}
log_test_addr ${a} $? 0 "Enslaved device server"
@@ -3080,7 +3080,7 @@ ipv6_udp_vrf()
for a in ${NSA_IP6} ${VRF_IP6}
do
log_start
- run_cmd nettest -6 -D -d ${VRF} -s &
+ run_cmd nettest -6 -D -I ${VRF} -s &
sleep 1
run_cmd nettest -6 -D -d ${VRF} -r ${a}
log_test_addr ${a} $? 0 "VRF server, VRF client, local conn"
@@ -3095,19 +3095,19 @@ ipv6_udp_vrf()
log_test_addr ${a} $? 1 "Global server, device client, local conn"
log_start
- run_cmd nettest -6 -D -d ${VRF} -s -2 ${NSA_DEV} &
+ run_cmd nettest -6 -D -I ${VRF} -s -3 ${NSA_DEV} &
sleep 1
run_cmd nettest -6 -D -d ${NSA_DEV} -r ${a}
log_test_addr ${a} $? 0 "VRF server, device client, local conn"
log_start
- run_cmd nettest -6 -D -d ${NSA_DEV} -s -2 ${NSA_DEV} &
+ run_cmd nettest -6 -D -I ${NSA_DEV} -s -3 ${NSA_DEV} &
sleep 1
run_cmd nettest -6 -D -d ${VRF} -r ${a}
log_test_addr ${a} $? 0 "Enslaved device server, VRF client, local conn"
log_start
- run_cmd nettest -6 -D -d ${NSA_DEV} -s -2 ${NSA_DEV} &
+ run_cmd nettest -6 -D -I ${NSA_DEV} -s -3 ${NSA_DEV} &
sleep 1
run_cmd nettest -6 -D -d ${NSA_DEV} -r ${a}
log_test_addr ${a} $? 0 "Enslaved device server, device client, local conn"
@@ -3122,7 +3122,7 @@ ipv6_udp_vrf()
for a in ${NSA_IP6} ${VRF_IP6}
do
log_start
- run_cmd nettest -6 -D -s -2 ${NSA_DEV} &
+ run_cmd nettest -6 -D -s -3 ${NSA_DEV} &
sleep 1
run_cmd_nsb nettest -6 -D -r ${a}
log_test_addr ${a} $? 0 "Global server"
@@ -3131,7 +3131,7 @@ ipv6_udp_vrf()
for a in ${NSA_IP6} ${VRF_IP6}
do
log_start
- run_cmd nettest -6 -D -d ${VRF} -s -2 ${NSA_DEV} &
+ run_cmd nettest -6 -D -I ${VRF} -s -3 ${NSA_DEV} &
sleep 1
run_cmd_nsb nettest -6 -D -r ${a}
log_test_addr ${a} $? 0 "VRF server"
@@ -3140,7 +3140,7 @@ ipv6_udp_vrf()
for a in ${NSA_IP6} ${VRF_IP6}
do
log_start
- run_cmd nettest -6 -D -d ${NSA_DEV} -s -2 ${NSA_DEV} &
+ run_cmd nettest -6 -D -I ${NSA_DEV} -s -3 ${NSA_DEV} &
sleep 1
run_cmd_nsb nettest -6 -D -r ${a}
log_test_addr ${a} $? 0 "Enslaved device server"
@@ -3184,13 +3184,13 @@ ipv6_udp_vrf()
#
a=${NSA_IP6}
log_start
- run_cmd nettest -6 -D -s -2 ${NSA_DEV} &
+ run_cmd nettest -6 -D -s -3 ${NSA_DEV} &
sleep 1
run_cmd nettest -6 -D -d ${VRF} -r ${a}
log_test_addr ${a} $? 0 "Global server, VRF client, local conn"
#log_start
- run_cmd nettest -6 -D -d ${VRF} -s -2 ${NSA_DEV} &
+ run_cmd nettest -6 -D -I ${VRF} -s -3 ${NSA_DEV} &
sleep 1
run_cmd nettest -6 -D -d ${VRF} -r ${a}
log_test_addr ${a} $? 0 "VRF server, VRF client, local conn"
@@ -3198,13 +3198,13 @@ ipv6_udp_vrf()
a=${VRF_IP6}
log_start
- run_cmd nettest -6 -D -s -2 ${VRF} &
+ run_cmd nettest -6 -D -s -3 ${VRF} &
sleep 1
run_cmd nettest -6 -D -d ${VRF} -r ${a}
log_test_addr ${a} $? 0 "Global server, VRF client, local conn"
log_start
- run_cmd nettest -6 -D -d ${VRF} -s -2 ${VRF} &
+ run_cmd nettest -6 -D -I ${VRF} -s -3 ${VRF} &
sleep 1
run_cmd nettest -6 -D -d ${VRF} -r ${a}
log_test_addr ${a} $? 0 "VRF server, VRF client, local conn"
@@ -3220,25 +3220,25 @@ ipv6_udp_vrf()
# device to global IP
a=${NSA_IP6}
log_start
- run_cmd nettest -6 -D -s -2 ${NSA_DEV} &
+ run_cmd nettest -6 -D -s -3 ${NSA_DEV} &
sleep 1
run_cmd nettest -6 -D -d ${NSA_DEV} -r ${a}
log_test_addr ${a} $? 0 "Global server, device client, local conn"
log_start
- run_cmd nettest -6 -D -d ${VRF} -s -2 ${NSA_DEV} &
+ run_cmd nettest -6 -D -I ${VRF} -s -3 ${NSA_DEV} &
sleep 1
run_cmd nettest -6 -D -d ${NSA_DEV} -r ${a}
log_test_addr ${a} $? 0 "VRF server, device client, local conn"
log_start
- run_cmd nettest -6 -D -d ${NSA_DEV} -s -2 ${NSA_DEV} &
+ run_cmd nettest -6 -D -I ${NSA_DEV} -s -3 ${NSA_DEV} &
sleep 1
run_cmd nettest -6 -D -d ${VRF} -r ${a}
log_test_addr ${a} $? 0 "Device server, VRF client, local conn"
log_start
- run_cmd nettest -6 -D -d ${NSA_DEV} -s -2 ${NSA_DEV} &
+ run_cmd nettest -6 -D -I ${NSA_DEV} -s -3 ${NSA_DEV} &
sleep 1
run_cmd nettest -6 -D -d ${NSA_DEV} -r ${a}
log_test_addr ${a} $? 0 "Device server, device client, local conn"
@@ -3332,7 +3332,7 @@ ipv6_addr_bind_novrf()
log_test_addr ${a} $? 0 "Raw socket bind to local address"
log_start
- run_cmd nettest -6 -s -R -P ipv6-icmp -l ${a} -d ${NSA_DEV} -b
+ run_cmd nettest -6 -s -R -P ipv6-icmp -l ${a} -I ${NSA_DEV} -b
log_test_addr ${a} $? 0 "Raw socket bind to local address after device bind"
done
@@ -3345,13 +3345,13 @@ ipv6_addr_bind_novrf()
log_test_addr ${a} $? 0 "TCP socket bind to local address"
log_start
- run_cmd nettest -6 -s -l ${a} -d ${NSA_DEV} -t1 -b
+ run_cmd nettest -6 -s -l ${a} -I ${NSA_DEV} -t1 -b
log_test_addr ${a} $? 0 "TCP socket bind to local address after device bind"
a=${NSA_LO_IP6}
log_start
show_hint "Should fail with 'Cannot assign requested address'"
- run_cmd nettest -6 -s -l ${a} -d ${NSA_DEV} -t1 -b
+ run_cmd nettest -6 -s -l ${a} -I ${NSA_DEV} -t1 -b
log_test_addr ${a} $? 1 "TCP socket bind to out of scope local address"
}
@@ -3363,18 +3363,18 @@ ipv6_addr_bind_vrf()
for a in ${NSA_IP6} ${VRF_IP6}
do
log_start
- run_cmd nettest -6 -s -R -P ipv6-icmp -l ${a} -d ${VRF} -b
+ run_cmd nettest -6 -s -R -P ipv6-icmp -l ${a} -I ${VRF} -b
log_test_addr ${a} $? 0 "Raw socket bind to local address after vrf bind"
log_start
- run_cmd nettest -6 -s -R -P ipv6-icmp -l ${a} -d ${NSA_DEV} -b
+ run_cmd nettest -6 -s -R -P ipv6-icmp -l ${a} -I ${NSA_DEV} -b
log_test_addr ${a} $? 0 "Raw socket bind to local address after device bind"
done
a=${NSA_LO_IP6}
log_start
show_hint "Address on loopback is out of VRF scope"
- run_cmd nettest -6 -s -R -P ipv6-icmp -l ${a} -d ${VRF} -b
+ run_cmd nettest -6 -s -R -P ipv6-icmp -l ${a} -I ${VRF} -b
log_test_addr ${a} $? 1 "Raw socket bind to invalid local address after vrf bind"
#
@@ -3384,29 +3384,29 @@ ipv6_addr_bind_vrf()
for a in ${NSA_IP6} ${VRF_IP6}
do
log_start
- run_cmd nettest -6 -s -l ${a} -d ${VRF} -t1 -b
+ run_cmd nettest -6 -s -l ${a} -I ${VRF} -t1 -b
log_test_addr ${a} $? 0 "TCP socket bind to local address with VRF bind"
done
a=${NSA_IP6}
log_start
- run_cmd nettest -6 -s -l ${a} -d ${NSA_DEV} -t1 -b
+ run_cmd nettest -6 -s -l ${a} -I ${NSA_DEV} -t1 -b
log_test_addr ${a} $? 0 "TCP socket bind to local address with device bind"
a=${VRF_IP6}
log_start
- run_cmd nettest -6 -s -l ${a} -d ${NSA_DEV} -t1 -b
+ run_cmd nettest -6 -s -l ${a} -I ${NSA_DEV} -t1 -b
log_test_addr ${a} $? 1 "TCP socket bind to VRF address with device bind"
a=${NSA_LO_IP6}
log_start
show_hint "Address on loopback out of scope for VRF"
- run_cmd nettest -6 -s -l ${a} -d ${VRF} -t1 -b
+ run_cmd nettest -6 -s -l ${a} -I ${VRF} -t1 -b
log_test_addr ${a} $? 1 "TCP socket bind to invalid local address for VRF"
log_start
show_hint "Address on loopback out of scope for device in VRF"
- run_cmd nettest -6 -s -l ${a} -d ${NSA_DEV} -t1 -b
+ run_cmd nettest -6 -s -l ${a} -I ${NSA_DEV} -t1 -b
log_test_addr ${a} $? 1 "TCP socket bind to invalid local address for device bind"
}
@@ -3454,7 +3454,7 @@ ipv6_rt()
for a in ${NSA_IP6} ${VRF_IP6}
do
log_start
- run_cmd nettest ${varg} -d ${VRF} -s &
+ run_cmd nettest ${varg} -I ${VRF} -s &
sleep 1
run_cmd_nsb nettest ${varg} -r ${a} &
sleep 3
@@ -3468,7 +3468,7 @@ ipv6_rt()
for a in ${NSA_IP6} ${VRF_IP6}
do
log_start
- run_cmd nettest ${varg} -d ${NSA_DEV} -s &
+ run_cmd nettest ${varg} -I ${NSA_DEV} -s &
sleep 1
run_cmd_nsb nettest ${varg} -r ${a} &
sleep 3
@@ -3525,7 +3525,7 @@ ipv6_rt()
for a in ${NSA_IP6} ${VRF_IP6}
do
log_start
- run_cmd nettest ${varg} -d ${VRF} -s &
+ run_cmd nettest ${varg} -I ${VRF} -s &
sleep 1
run_cmd nettest ${varg} -d ${VRF} -r ${a} &
sleep 3
@@ -3549,7 +3549,7 @@ ipv6_rt()
setup ${with_vrf}
log_start
- run_cmd nettest ${varg} -d ${VRF} -s &
+ run_cmd nettest ${varg} -I ${VRF} -s &
sleep 1
run_cmd nettest ${varg} -d ${NSA_DEV} -r ${a} &
sleep 3
@@ -3560,7 +3560,7 @@ ipv6_rt()
setup ${with_vrf}
log_start
- run_cmd nettest ${varg} -d ${NSA_DEV} -s &
+ run_cmd nettest ${varg} -I ${NSA_DEV} -s &
sleep 1
run_cmd nettest ${varg} -d ${NSA_DEV} -r ${a} &
sleep 3
diff --git a/tools/testing/selftests/net/nettest.c b/tools/testing/selftests/net/nettest.c
index 6c3b02efde3c..8865cc00e93a 100644
--- a/tools/testing/selftests/net/nettest.c
+++ b/tools/testing/selftests/net/nettest.c
@@ -79,6 +79,7 @@ struct sock_args {
int use_setsockopt;
int use_cmsg;
const char *dev;
+ const char *server_dev;
int ifindex;
const char *clientns;
@@ -96,6 +97,7 @@ struct sock_args {
/* expected addresses and device index for connection */
const char *expected_dev;
+ const char *expected_server_dev;
int expected_ifindex;
/* local address */
@@ -1424,6 +1426,8 @@ static int do_server(struct sock_args *args, int ipc_fd)
log_msg("Switched server netns\n");
}
+ args->dev = args->server_dev;
+ args->expected_dev = args->expected_server_dev;
if (resolve_devices(args) || validate_addresses(args))
goto err_exit;
@@ -1766,7 +1770,7 @@ static int ipc_parent(int cpid, int fd, struct sock_args *args)
return client_status;
}
-#define GETOPT_STR "sr:l:p:t:g:P:DRn:M:X:m:d:BN:O:SCi6L:0:1:2:Fbq"
+#define GETOPT_STR "sr:l:p:t:g:P:DRn:M:X:m:d:I:BN:O:SCi6L:0:1:2:3:Fbq"
static void print_usage(char *prog)
{
@@ -1790,6 +1794,7 @@ static void print_usage(char *prog)
" -l addr local address to bind to\n"
"\n"
" -d dev bind socket to given device name\n"
+ " -I dev bind socket to given device name - server mode\n"
" -S use setsockopt (IP_UNICAST_IF or IP_MULTICAST_IF)\n"
" to set device binding\n"
" -C use cmsg and IP_PKTINFO to specify device binding\n"
@@ -1806,6 +1811,7 @@ static void print_usage(char *prog)
" -0 addr Expected local address\n"
" -1 addr Expected remote address\n"
" -2 dev Expected device name (or index) to receive packet\n"
+ " -3 dev Expected device name (or index) to receive packets - server mode\n"
"\n"
" -b Bind test only.\n"
" -q Be quiet. Run test without printing anything.\n"
@@ -1918,6 +1924,9 @@ int main(int argc, char *argv[])
case 'd':
args.dev = optarg;
break;
+ case 'I':
+ args.server_dev = optarg;
+ break;
case 'i':
interactive = 1;
break;
@@ -1944,6 +1953,9 @@ int main(int argc, char *argv[])
case '2':
args.expected_dev = optarg;
break;
+ case '3':
+ args.expected_server_dev = optarg;
+ break;
case 'q':
quiet = 1;
break;
--
2.24.3 (Apple Git-128)
Powered by blists - more mailing lists