[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20210114044331.5073-4-kabel@kernel.org>
Date: Thu, 14 Jan 2021 05:43:29 +0100
From: Marek Behún <kabel@...nel.org>
To: netdev@...r.kernel.org
Cc: Russell King <rmk+kernel@...linux.org.uk>,
Andrew Lunn <andrew@...n.ch>, Jakub Kicinski <kuba@...nel.org>,
davem@...emloft.net, pali@...nel.org,
Marek Behún <kabel@...nel.org>
Subject: [PATCH net-next v5 3/5] net: phylink: allow attaching phy for SFP modules on 802.3z mode
Some SFPs may contain an internal PHY which may in some cases want to
connect with the host interface in 1000base-x/2500base-x mode.
Do not fail if such PHY is being attached in one of these PHY interface
modes.
Signed-off-by: Marek Behún <kabel@...nel.org>
Reviewed-by: Russell King <rmk+kernel@...linux.org.uk>
Reviewed-by: Pali Rohár <pali@...nel.org>
Cc: Andrew Lunn <andrew@...n.ch>
---
drivers/net/phy/phylink.c | 5 +----
1 file changed, 1 insertion(+), 4 deletions(-)
diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
index 84f6e197f965..f97d041f82f4 100644
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -1018,7 +1018,7 @@ static int phylink_attach_phy(struct phylink *pl, struct phy_device *phy,
{
if (WARN_ON(pl->cfg_link_an_mode == MLO_AN_FIXED ||
(pl->cfg_link_an_mode == MLO_AN_INBAND &&
- phy_interface_mode_is_8023z(interface))))
+ phy_interface_mode_is_8023z(interface) && !pl->sfp_bus)))
return -EINVAL;
if (pl->phydev)
@@ -2069,9 +2069,6 @@ static int phylink_sfp_config(struct phylink *pl, u8 mode,
phylink_an_mode_str(mode), phy_modes(config.interface),
__ETHTOOL_LINK_MODE_MASK_NBITS, support);
- if (phy_interface_mode_is_8023z(iface) && pl->phydev)
- return -EINVAL;
-
changed = !linkmode_equal(pl->supported, support);
if (changed) {
linkmode_copy(pl->supported, support);
--
2.26.2
Powered by blists - more mailing lists