lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20210113234117.3805255-1-jarod@redhat.com>
Date:   Wed, 13 Jan 2021 18:41:17 -0500
From:   Jarod Wilson <jarod@...hat.com>
To:     netdev@...r.kernel.org
Cc:     Jarod Wilson <jarod@...hat.com>,
        Stephen Hemminger <stephen@...workplumber.org>,
        Jay Vosburgh <j.vosburgh@...il.com>
Subject: [PATCH iproute2] bond: support xmit_hash_policy=vlan+mac

There's a new transmit hash policy being added to the bonding driver that
is a simple XOR of vlan ID and source MAC, xmit_hash_policy vlan+mac. This
trivial patch makes it configurable and queryable via iproute2.

$ sudo modprobe bonding mode=2 max_bonds=1 xmit_hash_policy=0

$ sudo ip link set bond0 type bond xmit_hash_policy vlan+mac

$ ip -d link show bond0
11: bond0: <BROADCAST,MULTICAST,MASTER> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
    link/ether ce:85:5e:24:ce:90 brd ff:ff:ff:ff:ff:ff promiscuity 0 minmtu 68 maxmtu 65535
    bond mode balance-xor miimon 0 updelay 0 downdelay 0 peer_notify_delay 0 use_carrier 1 arp_interval 0 arp_validate none arp_all_targets any
primary_reselect always fail_over_mac none xmit_hash_policy vlan+mac resend_igmp 1 num_grat_arp 1 all_slaves_active 0 min_links 0 lp_interval 1
packets_per_slave 1 lacp_rate slow ad_select stable tlb_dynamic_lb 1 addrgenmode eui64 numtxqueues 16 numrxqueues 16 gso_max_size 65536 gso_max_segs
65535

$ grep Hash /proc/net/bonding/bond0
Transmit Hash Policy: vlan+mac (5)

$ sudo ip link add test type bond help
Usage: ... bond [ mode BONDMODE ] [ active_slave SLAVE_DEV ]
                [ clear_active_slave ] [ miimon MIIMON ]
                [ updelay UPDELAY ] [ downdelay DOWNDELAY ]
                [ peer_notify_delay DELAY ]
                [ use_carrier USE_CARRIER ]
                [ arp_interval ARP_INTERVAL ]
                [ arp_validate ARP_VALIDATE ]
                [ arp_all_targets ARP_ALL_TARGETS ]
                [ arp_ip_target [ ARP_IP_TARGET, ... ] ]
                [ primary SLAVE_DEV ]
                [ primary_reselect PRIMARY_RESELECT ]
                [ fail_over_mac FAIL_OVER_MAC ]
                [ xmit_hash_policy XMIT_HASH_POLICY ]
                [ resend_igmp RESEND_IGMP ]
                [ num_grat_arp|num_unsol_na NUM_GRAT_ARP|NUM_UNSOL_NA ]
                [ all_slaves_active ALL_SLAVES_ACTIVE ]
                [ min_links MIN_LINKS ]
                [ lp_interval LP_INTERVAL ]
                [ packets_per_slave PACKETS_PER_SLAVE ]
                [ tlb_dynamic_lb TLB_DYNAMIC_LB ]
                [ lacp_rate LACP_RATE ]
                [ ad_select AD_SELECT ]
                [ ad_user_port_key PORTKEY ]
                [ ad_actor_sys_prio SYSPRIO ]
                [ ad_actor_system LLADDR ]

BONDMODE := balance-rr|active-backup|balance-xor|broadcast|802.3ad|balance-tlb|balance-alb
ARP_VALIDATE := none|active|backup|all
ARP_ALL_TARGETS := any|all
PRIMARY_RESELECT := always|better|failure
FAIL_OVER_MAC := none|active|follow
XMIT_HASH_POLICY := layer2|layer2+3|layer3+4|encap2+3|encap3+4|vlan+mac
LACP_RATE := slow|fast
AD_SELECT := stable|bandwidth|count

Cc: Stephen Hemminger <stephen@...workplumber.org>
Cc: Jay Vosburgh <j.vosburgh@...il.com>
Signed-off-by: Jarod Wilson <jarod@...hat.com>
---
 ip/iplink_bond.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/ip/iplink_bond.c b/ip/iplink_bond.c
index 585b6be1..b9470b98 100644
--- a/ip/iplink_bond.c
+++ b/ip/iplink_bond.c
@@ -70,6 +70,7 @@ static const char *xmit_hash_policy_tbl[] = {
 	"layer2+3",
 	"encap2+3",
 	"encap3+4",
+	"vlan+mac",
 	NULL,
 };
 
@@ -148,7 +149,7 @@ static void print_explain(FILE *f)
 		"ARP_ALL_TARGETS := any|all\n"
 		"PRIMARY_RESELECT := always|better|failure\n"
 		"FAIL_OVER_MAC := none|active|follow\n"
-		"XMIT_HASH_POLICY := layer2|layer2+3|layer3+4|encap2+3|encap3+4\n"
+		"XMIT_HASH_POLICY := layer2|layer2+3|layer3+4|encap2+3|encap3+4|vlan+mac\n"
 		"LACP_RATE := slow|fast\n"
 		"AD_SELECT := stable|bandwidth|count\n"
 	);
-- 
2.27.0

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ