netdev - Re: [PATCH iproute2] bond: support xmit_hash

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20210115151254.GB1176575@redhat.com>
Date:   Fri, 15 Jan 2021 10:12:54 -0500
From:   Jarod Wilson <jarod@...hat.com>
To:     netdev@...r.kernel.org
Cc:     Stephen Hemminger <stephen@...workplumber.org>,
        Jay Vosburgh <j.vosburgh@...il.com>
Subject: Re: [PATCH iproute2] bond: support xmit_hash_policy=vlan+mac

On Wed, Jan 13, 2021 at 06:41:17PM -0500, Jarod Wilson wrote:
> There's a new transmit hash policy being added to the bonding driver that
> is a simple XOR of vlan ID and source MAC, xmit_hash_policy vlan+mac. This
> trivial patch makes it configurable and queryable via iproute2.
> 
> $ sudo modprobe bonding mode=2 max_bonds=1 xmit_hash_policy=0
> 
> $ sudo ip link set bond0 type bond xmit_hash_policy vlan+mac
> 
> $ ip -d link show bond0
> 11: bond0: <BROADCAST,MULTICAST,MASTER> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
>     link/ether ce:85:5e:24:ce:90 brd ff:ff:ff:ff:ff:ff promiscuity 0 minmtu 68 maxmtu 65535
>     bond mode balance-xor miimon 0 updelay 0 downdelay 0 peer_notify_delay 0 use_carrier 1 arp_interval 0 arp_validate none arp_all_targets any
> primary_reselect always fail_over_mac none xmit_hash_policy vlan+mac resend_igmp 1 num_grat_arp 1 all_slaves_active 0 min_links 0 lp_interval 1
> packets_per_slave 1 lacp_rate slow ad_select stable tlb_dynamic_lb 1 addrgenmode eui64 numtxqueues 16 numrxqueues 16 gso_max_size 65536 gso_max_segs
> 65535
> 
> $ grep Hash /proc/net/bonding/bond0
> Transmit Hash Policy: vlan+mac (5)
> 
> $ sudo ip link add test type bond help
> Usage: ... bond [ mode BONDMODE ] [ active_slave SLAVE_DEV ]
>                 [ clear_active_slave ] [ miimon MIIMON ]
>                 [ updelay UPDELAY ] [ downdelay DOWNDELAY ]
>                 [ peer_notify_delay DELAY ]
>                 [ use_carrier USE_CARRIER ]
>                 [ arp_interval ARP_INTERVAL ]
>                 [ arp_validate ARP_VALIDATE ]
>                 [ arp_all_targets ARP_ALL_TARGETS ]
>                 [ arp_ip_target [ ARP_IP_TARGET, ... ] ]
>                 [ primary SLAVE_DEV ]
>                 [ primary_reselect PRIMARY_RESELECT ]
>                 [ fail_over_mac FAIL_OVER_MAC ]
>                 [ xmit_hash_policy XMIT_HASH_POLICY ]
>                 [ resend_igmp RESEND_IGMP ]
>                 [ num_grat_arp|num_unsol_na NUM_GRAT_ARP|NUM_UNSOL_NA ]
>                 [ all_slaves_active ALL_SLAVES_ACTIVE ]
>                 [ min_links MIN_LINKS ]
>                 [ lp_interval LP_INTERVAL ]
>                 [ packets_per_slave PACKETS_PER_SLAVE ]
>                 [ tlb_dynamic_lb TLB_DYNAMIC_LB ]
>                 [ lacp_rate LACP_RATE ]
>                 [ ad_select AD_SELECT ]
>                 [ ad_user_port_key PORTKEY ]
>                 [ ad_actor_sys_prio SYSPRIO ]
>                 [ ad_actor_system LLADDR ]
> 
> BONDMODE := balance-rr|active-backup|balance-xor|broadcast|802.3ad|balance-tlb|balance-alb
> ARP_VALIDATE := none|active|backup|all
> ARP_ALL_TARGETS := any|all
> PRIMARY_RESELECT := always|better|failure
> FAIL_OVER_MAC := none|active|follow
> XMIT_HASH_POLICY := layer2|layer2+3|layer3+4|encap2+3|encap3+4|vlan+mac
> LACP_RATE := slow|fast
> AD_SELECT := stable|bandwidth|count
> 
> Cc: Stephen Hemminger <stephen@...workplumber.org>
> Cc: Jay Vosburgh <j.vosburgh@...il.com>
> Signed-off-by: Jarod Wilson <jarod@...hat.com>

Self-nack on this version, renaming the mode to vlan+srcmac as discussed.

-- 
Jarod Wilson
jarod@...hat.com