lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  PHC 
Open Source and information security mailing list archives
 
Hash Suite for Android: free password hash cracker in your pocket
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Date:   Sat, 16 Jan 2021 14:45:25 +0100
From:   Heiner Kallweit <hkallweit1@...il.com>
To:     Raju Rangoju <rajur@...lsio.com>,
        David Miller <davem@...emloft.net>,
        Jakub Kicinski <kuba@...nel.org>
Cc:     "netdev@...r.kernel.org" <netdev@...r.kernel.org>
Subject: [PATCH net-next] cxgb4: remove bogus CHELSIO_VPD_UNIQUE_ID constant

The comment is quite weird, there is no such thing as a vendor-specific
VPD id. 0x82 is the value of PCI_VPD_LRDT_ID_STRING. So what we are
doing here is simply checking whether the byte at VPD address VPD_BASE
is a valid string LRDT, same as what is done a few lines later in
the code.
LRDT = Large Resource Data Tag, see PCI 2.2 spec, VPD chapter

Signed-off-by: Heiner Kallweit <hkallweit1@...il.com>
---
 drivers/net/ethernet/chelsio/cxgb4/t4_hw.c | 16 +++++-----------
 1 file changed, 5 insertions(+), 11 deletions(-)

diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
index 2c80371f9..48f20a6a0 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
@@ -2689,7 +2689,6 @@ void t4_get_regs(struct adapter *adap, void *buf, size_t buf_size)
 #define VPD_BASE           0x400
 #define VPD_BASE_OLD       0
 #define VPD_LEN            1024
-#define CHELSIO_VPD_UNIQUE_ID 0x82
 
 /**
  * t4_eeprom_ptov - translate a physical EEPROM address to virtual
@@ -2743,9 +2742,9 @@ int t4_seeprom_wp(struct adapter *adapter, bool enable)
  */
 int t4_get_raw_vpd_params(struct adapter *adapter, struct vpd_params *p)
 {
-	int i, ret = 0, addr;
+	int i, ret = 0, addr = VPD_BASE;
 	int ec, sn, pn, na;
-	u8 *vpd, csum;
+	u8 *vpd, csum, base_val = 0;
 	unsigned int vpdr_len, kw_offset, id_len;
 
 	vpd = vmalloc(VPD_LEN);
@@ -2755,17 +2754,12 @@ int t4_get_raw_vpd_params(struct adapter *adapter, struct vpd_params *p)
 	/* Card information normally starts at VPD_BASE but early cards had
 	 * it at 0.
 	 */
-	ret = pci_read_vpd(adapter->pdev, VPD_BASE, sizeof(u32), vpd);
+	ret = pci_read_vpd(adapter->pdev, VPD_BASE, 1, &base_val);
 	if (ret < 0)
 		goto out;
 
-	/* The VPD shall have a unique identifier specified by the PCI SIG.
-	 * For chelsio adapters, the identifier is 0x82. The first byte of a VPD
-	 * shall be CHELSIO_VPD_UNIQUE_ID (0x82). The VPD programming software
-	 * is expected to automatically put this entry at the
-	 * beginning of the VPD.
-	 */
-	addr = *vpd == CHELSIO_VPD_UNIQUE_ID ? VPD_BASE : VPD_BASE_OLD;
+	if (base_val != PCI_VPD_LRDT_ID_STRING)
+		addr = VPD_BASE_OLD;
 
 	ret = pci_read_vpd(adapter->pdev, addr, VPD_LEN, vpd);
 	if (ret < 0)
-- 
2.30.0

Powered by blists - more mailing lists