| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20210117081548.1278992-5-leon@kernel.org>
Date: Sun, 17 Jan 2021 10:15:47 +0200
From: Leon Romanovsky <leon@...nel.org>
To: Bjorn Helgaas <bhelgaas@...gle.com>,
Saeed Mahameed <saeedm@...dia.com>
Cc: Leon Romanovsky <leonro@...dia.com>,
Jason Gunthorpe <jgg@...dia.com>,
Jakub Kicinski <kuba@...nel.org>, linux-pci@...r.kernel.org,
linux-rdma@...r.kernel.org, netdev@...r.kernel.org,
Don Dutile <ddutile@...hat.com>,
Alex Williamson <alex.williamson@...hat.com>,
Alexander Duyck <alexander.duyck@...il.com>
Subject: [PATCH mlx5-next v3 4/5] net/mlx5: Dynamically assign MSI-X vectors count
From: Leon Romanovsky <leonro@...dia.com>
The number of MSI-X vectors is PCI property visible through lspci, that
field is read-only and configured by the device. The static assignment
of an amount of MSI-X vectors doesn't allow utilize the newly created
VF because it is not known to the device the future load and configuration
where that VF will be used.
To overcome the inefficiency in the spread of such MSI-X vectors, we
allow the kernel to instruct the device with the needed number of such
vectors.
Such change immediately increases the amount of MSI-X vectors for the
system with @ VFs from 12 vectors per-VF, to be 32 vectors per-VF.
Before this patch:
[root@...ver ~]# lspci -vs 0000:08:00.2
08:00.2 Ethernet controller: Mellanox Technologies MT27800 Family [ConnectX-5 Virtual Function]
....
Capabilities: [9c] MSI-X: Enable- Count=12 Masked-
After this patch:
[root@...ver ~]# lspci -vs 0000:08:00.2
08:00.2 Ethernet controller: Mellanox Technologies MT27800 Family [ConnectX-5 Virtual Function]
....
Capabilities: [9c] MSI-X: Enable- Count=32 Masked-
Signed-off-by: Leon Romanovsky <leonro@...dia.com>
---
.../net/ethernet/mellanox/mlx5/core/main.c | 4 ++
.../ethernet/mellanox/mlx5/core/mlx5_core.h | 5 ++
.../net/ethernet/mellanox/mlx5/core/pci_irq.c | 72 +++++++++++++++++++
.../net/ethernet/mellanox/mlx5/core/sriov.c | 13 +++-
4 files changed, 92 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/main.c b/drivers/net/ethernet/mellanox/mlx5/core/main.c
index c08315b51fd3..8269cfbfc69d 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/main.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/main.c
@@ -567,6 +567,10 @@ static int handle_hca_cap(struct mlx5_core_dev *dev, void *set_ctx)
if (MLX5_CAP_GEN_MAX(dev, mkey_by_name))
MLX5_SET(cmd_hca_cap, set_hca_cap, mkey_by_name, 1);
+ if (MLX5_CAP_GEN_MAX(dev, num_total_dynamic_vf_msix))
+ MLX5_SET(cmd_hca_cap, set_hca_cap, num_total_dynamic_vf_msix,
+ MLX5_CAP_GEN_MAX(dev, num_total_dynamic_vf_msix));
+
return set_caps(dev, set_ctx, MLX5_SET_HCA_CAP_OP_MOD_GENERAL_DEVICE);
}
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/mlx5_core.h b/drivers/net/ethernet/mellanox/mlx5/core/mlx5_core.h
index 0a0302ce7144..5babb4434a87 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/mlx5_core.h
+++ b/drivers/net/ethernet/mellanox/mlx5/core/mlx5_core.h
@@ -172,6 +172,11 @@ int mlx5_irq_attach_nb(struct mlx5_irq_table *irq_table, int vecidx,
struct notifier_block *nb);
int mlx5_irq_detach_nb(struct mlx5_irq_table *irq_table, int vecidx,
struct notifier_block *nb);
+
+int mlx5_set_msix_vec_count(struct mlx5_core_dev *dev, int devfn,
+ int msix_vec_count);
+int mlx5_get_default_msix_vec_count(struct mlx5_core_dev *dev, int num_vfs);
+
struct cpumask *
mlx5_irq_get_affinity_mask(struct mlx5_irq_table *irq_table, int vecidx);
struct cpu_rmap *mlx5_irq_get_rmap(struct mlx5_irq_table *table);
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/pci_irq.c b/drivers/net/ethernet/mellanox/mlx5/core/pci_irq.c
index 6fd974920394..2a35888fcff0 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/pci_irq.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/pci_irq.c
@@ -55,6 +55,78 @@ static struct mlx5_irq *mlx5_irq_get(struct mlx5_core_dev *dev, int vecidx)
return &irq_table->irq[vecidx];
}
+/**
+ * mlx5_get_default_msix_vec_count() - Get defaults of number of MSI-X vectors
+ * to be set
+ * @dev: PF to work on
+ * @num_vfs: Number of VFs was asked when SR-IOV was enabled
+ **/
+int mlx5_get_default_msix_vec_count(struct mlx5_core_dev *dev, int num_vfs)
+{
+ int num_vf_msix, min_msix, max_msix;
+
+ num_vf_msix = MLX5_CAP_GEN_MAX(dev, num_total_dynamic_vf_msix);
+ if (!num_vf_msix)
+ return 0;
+
+ min_msix = MLX5_CAP_GEN(dev, min_dynamic_vf_msix_table_size);
+ max_msix = MLX5_CAP_GEN(dev, max_dynamic_vf_msix_table_size);
+
+ /* Limit maximum number of MSI-X to leave some of them free in the
+ * pool and ready to be assigned by the users without need to resize
+ * other Vfs.
+ */
+ return max(min(num_vf_msix / num_vfs, max_msix / 2), min_msix);
+}
+
+/**
+ * mlx5_set_msix_vec_count() - Set dynamically allocated MSI-X to the VF
+ * @dev: PF to work on
+ * @function_id: Internal PCI VF function id
+ * @msix_vec_count: Number of MSI-X to set
+ **/
+int mlx5_set_msix_vec_count(struct mlx5_core_dev *dev, int function_id,
+ int msix_vec_count)
+{
+ int sz = MLX5_ST_SZ_BYTES(set_hca_cap_in);
+ int num_vf_msix, min_msix, max_msix;
+ void *hca_cap, *cap;
+ int ret;
+
+ num_vf_msix = MLX5_CAP_GEN_MAX(dev, num_total_dynamic_vf_msix);
+ if (!num_vf_msix)
+ return 0;
+
+ if (!MLX5_CAP_GEN(dev, vport_group_manager) || !mlx5_core_is_pf(dev))
+ return -EOPNOTSUPP;
+
+ min_msix = MLX5_CAP_GEN(dev, min_dynamic_vf_msix_table_size);
+ max_msix = MLX5_CAP_GEN(dev, max_dynamic_vf_msix_table_size);
+
+ if (msix_vec_count < min_msix)
+ return -EINVAL;
+
+ if (msix_vec_count > max_msix)
+ return -EOVERFLOW;
+
+ hca_cap = kzalloc(sz, GFP_KERNEL);
+ if (!hca_cap)
+ return -ENOMEM;
+
+ cap = MLX5_ADDR_OF(set_hca_cap_in, hca_cap, capability);
+ MLX5_SET(cmd_hca_cap, cap, dynamic_msix_table_size, msix_vec_count);
+
+ MLX5_SET(set_hca_cap_in, hca_cap, opcode, MLX5_CMD_OP_SET_HCA_CAP);
+ MLX5_SET(set_hca_cap_in, hca_cap, other_function, 1);
+ MLX5_SET(set_hca_cap_in, hca_cap, function_id, function_id);
+
+ MLX5_SET(set_hca_cap_in, hca_cap, op_mod,
+ MLX5_SET_HCA_CAP_OP_MOD_GENERAL_DEVICE << 1);
+ ret = mlx5_cmd_exec_in(dev, set_hca_cap, hca_cap);
+ kfree(hca_cap);
+ return ret;
+}
+
int mlx5_irq_attach_nb(struct mlx5_irq_table *irq_table, int vecidx,
struct notifier_block *nb)
{
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/sriov.c b/drivers/net/ethernet/mellanox/mlx5/core/sriov.c
index 3094d20297a9..f0ec86a1c8a6 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/sriov.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/sriov.c
@@ -71,8 +71,7 @@ static int sriov_restore_guids(struct mlx5_core_dev *dev, int vf)
static int mlx5_device_enable_sriov(struct mlx5_core_dev *dev, int num_vfs)
{
struct mlx5_core_sriov *sriov = &dev->priv.sriov;
- int err;
- int vf;
+ int err, vf, num_msix_count;
if (!MLX5_ESWITCH_MANAGER(dev))
goto enable_vfs_hca;
@@ -85,12 +84,22 @@ static int mlx5_device_enable_sriov(struct mlx5_core_dev *dev, int num_vfs)
}
enable_vfs_hca:
+ num_msix_count = mlx5_get_default_msix_vec_count(dev, num_vfs);
for (vf = 0; vf < num_vfs; vf++) {
err = mlx5_core_enable_hca(dev, vf + 1);
if (err) {
mlx5_core_warn(dev, "failed to enable VF %d (%d)\n", vf, err);
continue;
}
+
+ err = mlx5_set_msix_vec_count(dev, vf + 1, num_msix_count);
+ if (err) {
+ mlx5_core_warn(dev,
+ "failed to set MSI-X vector counts VF %d, err %d\n",
+ vf, err);
+ continue;
+ }
+
sriov->vfs_ctx[vf].enabled = 1;
if (MLX5_CAP_GEN(dev, port_type) == MLX5_CAP_PORT_TYPE_IB) {
err = sriov_restore_guids(dev, vf);
--
2.29.2
Powered by blists - more mailing lists