netdev - Re: [patch net-next RFC 00/10] introduce line card support for modular switch

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20210119115610.GZ3565223@nanopsycho.orion>
Date:   Tue, 19 Jan 2021 12:56:10 +0100
From:   Jiri Pirko <jiri@...nulli.us>
To:     Andrew Lunn <andrew@...n.ch>
Cc:     netdev@...r.kernel.org, davem@...emloft.net, kuba@...nel.org,
        jacob.e.keller@...el.com, roopa@...dia.com, mlxsw@...dia.com
Subject: Re: [patch net-next RFC 00/10] introduce line card support for
 modular switch

Thu, Jan 14, 2021 at 03:07:18AM CET, andrew@...n.ch wrote:
>> $ devlink lc provision netdevsim/netdevsim10 lc 0 type card4ports
>> $ devlink lc
>> netdevsim/netdevsim10:
>>   lc 0 state provisioned type card4ports
>>     supported_types:
>>        card1port card2ports card4ports
>>   lc 1 state unprovisioned
>>     supported_types:
>>        card1port card2ports card4ports
>
>Hi Jiri
>
>> # Now activate the line card using debugfs. That emulates plug-in event
>> # on real hardware:
>> $ echo "Y"> /sys/kernel/debug/netdevsim/netdevsim10/linecards/0/active
>> $ ip link show eni10nl0p1
>> 165: eni10nl0p1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP mode DEFAULT group default qlen 1000
>>     link/ether 7e:2d:05:93:d3:d1 brd ff:ff:ff:ff:ff:ff
>> # The carrier is UP now.
>
>What is missing from the devlink lc view is what line card is actually
>in the slot. Say if i provision for a card4port, but actually insert a
>card2port. It would be nice to have something like:

I checked, our hw does not support that. Only provides info that
linecard activation was/wasn't successful.


>
> $ devlink lc
> netdevsim/netdevsim10:
>   lc 0 state provisioned type card4ports
>     supported_types:
>        card1port card2ports card4ports
>     inserted_type:
>        card2ports;
>   lc 1 state unprovisioned
>     supported_types:
>        card1port card2ports card4ports
>     inserted_type:
>        None
>
>I assume if i prevision for card4ports but actually install a
>card2ports, all the interfaces stay down?
>
>Maybe
>
>> $ echo "Y"> /sys/kernel/debug/netdevsim/netdevsim10/linecards/0/active
>
>should actually be
>    echo "card2ports" > /sys/kernel/debug/netdevsim/netdevsim10/linecards/0/active
>
>so you can emulate somebody putting the wrong card in the slot?
>
>    Andrew