| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20210122150517.7650-2-irusskikh@marvell.com>
Date: Fri, 22 Jan 2021 16:05:16 +0100
From: Igor Russkikh <irusskikh@...vell.com>
To: <netdev@...r.kernel.org>
CC: "David S . Miller" <davem@...emloft.net>,
Jakub Kicinski <kuba@...nel.org>,
Igor Russkikh <irusskikh@...vell.com>
Subject: [PATCH net-next 1/2] samples: pktgen: allow to specify delay parameter via new opt
DELAY may now be explicitly specified via common parameter -w
Signed-off-by: Igor Russkikh <irusskikh@...vell.com>
---
samples/pktgen/parameters.sh | 10 +++++++++-
samples/pktgen/pktgen_bench_xmit_mode_netif_receive.sh | 3 ---
samples/pktgen/pktgen_bench_xmit_mode_queue_xmit.sh | 3 ---
samples/pktgen/pktgen_sample01_simple.sh | 3 ---
samples/pktgen/pktgen_sample02_multiqueue.sh | 1 -
samples/pktgen/pktgen_sample03_burst_single_flow.sh | 3 ---
samples/pktgen/pktgen_sample04_many_flows.sh | 3 ---
samples/pktgen/pktgen_sample05_flow_per_thread.sh | 3 ---
.../pktgen_sample06_numa_awared_queue_irq_affinity.sh | 1 -
9 files changed, 9 insertions(+), 21 deletions(-)
diff --git a/samples/pktgen/parameters.sh b/samples/pktgen/parameters.sh
index ff0ed474fee9..70cc2878d479 100644
--- a/samples/pktgen/parameters.sh
+++ b/samples/pktgen/parameters.sh
@@ -19,12 +19,13 @@ function usage() {
echo " -v : (\$VERBOSE) verbose"
echo " -x : (\$DEBUG) debug"
echo " -6 : (\$IP6) IPv6"
+ echo " -w : (\$DELAY) Tx Delay value (us)"
echo ""
}
## --- Parse command line arguments / parameters ---
## echo "Commandline options:"
-while getopts "s:i:d:m:p:f:t:c:n:b:vxh6" option; do
+while getopts "s:i:d:m:p:f:t:c:n:b:w:vxh6" option; do
case $option in
i) # interface
export DEV=$OPTARG
@@ -66,6 +67,10 @@ while getopts "s:i:d:m:p:f:t:c:n:b:vxh6" option; do
export BURST=$OPTARG
info "SKB bursting: BURST=$BURST"
;;
+ w)
+ export DELAY=$OPTARG
+ info "DELAY=$DELAY"
+ ;;
v)
export VERBOSE=yes
info "Verbose mode: VERBOSE=$VERBOSE"
@@ -100,6 +105,9 @@ if [ -z "$THREADS" ]; then
export THREADS=1
fi
+# default DELAY
+[ -z "$DELAY" ] && export DELAY=0 # Zero means max speed
+
export L_THREAD=$(( THREADS + F_THREAD - 1 ))
if [ -z "$DEV" ]; then
diff --git a/samples/pktgen/pktgen_bench_xmit_mode_netif_receive.sh b/samples/pktgen/pktgen_bench_xmit_mode_netif_receive.sh
index 1b6204125d2d..30a610b541ad 100755
--- a/samples/pktgen/pktgen_bench_xmit_mode_netif_receive.sh
+++ b/samples/pktgen/pktgen_bench_xmit_mode_netif_receive.sh
@@ -50,9 +50,6 @@ if [ -n "$DST_PORT" ]; then
validate_ports $UDP_DST_MIN $UDP_DST_MAX
fi
-# Base Config
-DELAY="0" # Zero means max speed
-
# General cleanup everything since last run
pg_ctrl "reset"
diff --git a/samples/pktgen/pktgen_bench_xmit_mode_queue_xmit.sh b/samples/pktgen/pktgen_bench_xmit_mode_queue_xmit.sh
index e607cb369b20..a6195bd77532 100755
--- a/samples/pktgen/pktgen_bench_xmit_mode_queue_xmit.sh
+++ b/samples/pktgen/pktgen_bench_xmit_mode_queue_xmit.sh
@@ -33,9 +33,6 @@ if [ -n "$DST_PORT" ]; then
validate_ports $UDP_DST_MIN $UDP_DST_MAX
fi
-# Base Config
-DELAY="0" # Zero means max speed
-
# General cleanup everything since last run
pg_ctrl "reset"
diff --git a/samples/pktgen/pktgen_sample01_simple.sh b/samples/pktgen/pktgen_sample01_simple.sh
index a4e250b45dce..c2ad1fa32d3f 100755
--- a/samples/pktgen/pktgen_sample01_simple.sh
+++ b/samples/pktgen/pktgen_sample01_simple.sh
@@ -31,9 +31,6 @@ if [ -n "$DST_PORT" ]; then
validate_ports $UDP_DST_MIN $UDP_DST_MAX
fi
-# Base Config
-DELAY="0" # Zero means max speed
-
# Flow variation random source port between min and max
UDP_SRC_MIN=9
UDP_SRC_MAX=109
diff --git a/samples/pktgen/pktgen_sample02_multiqueue.sh b/samples/pktgen/pktgen_sample02_multiqueue.sh
index cb2495fcdc60..49e1e81a2945 100755
--- a/samples/pktgen/pktgen_sample02_multiqueue.sh
+++ b/samples/pktgen/pktgen_sample02_multiqueue.sh
@@ -17,7 +17,6 @@ source ${basedir}/parameters.sh
[ -z "$COUNT" ] && COUNT="100000" # Zero means indefinitely
# Base Config
-DELAY="0" # Zero means max speed
[ -z "$CLONE_SKB" ] && CLONE_SKB="0"
# Flow variation random source port between min and max
diff --git a/samples/pktgen/pktgen_sample03_burst_single_flow.sh b/samples/pktgen/pktgen_sample03_burst_single_flow.sh
index fff50765a5aa..f9b67affb567 100755
--- a/samples/pktgen/pktgen_sample03_burst_single_flow.sh
+++ b/samples/pktgen/pktgen_sample03_burst_single_flow.sh
@@ -42,9 +42,6 @@ if [ -n "$DST_PORT" ]; then
validate_ports $UDP_DST_MIN $UDP_DST_MAX
fi
-# Base Config
-DELAY="0" # Zero means max speed
-
# General cleanup everything since last run
pg_ctrl "reset"
diff --git a/samples/pktgen/pktgen_sample04_many_flows.sh b/samples/pktgen/pktgen_sample04_many_flows.sh
index 2cd6b701400d..ac2d037a6160 100755
--- a/samples/pktgen/pktgen_sample04_many_flows.sh
+++ b/samples/pktgen/pktgen_sample04_many_flows.sh
@@ -34,9 +34,6 @@ fi
[ -z "$FLOWS" ] && FLOWS="8000"
[ -z "$FLOWLEN" ] && FLOWLEN="10"
-# Base Config
-DELAY="0" # Zero means max speed
-
if [[ -n "$BURST" ]]; then
err 1 "Bursting not supported for this mode"
fi
diff --git a/samples/pktgen/pktgen_sample05_flow_per_thread.sh b/samples/pktgen/pktgen_sample05_flow_per_thread.sh
index 4cb6252ade39..85256484c86f 100755
--- a/samples/pktgen/pktgen_sample05_flow_per_thread.sh
+++ b/samples/pktgen/pktgen_sample05_flow_per_thread.sh
@@ -31,9 +31,6 @@ if [ -n "$DST_PORT" ]; then
validate_ports $UDP_DST_MIN $UDP_DST_MAX
fi
-# Base Config
-DELAY="0" # Zero means max speed
-
# General cleanup everything since last run
pg_ctrl "reset"
diff --git a/samples/pktgen/pktgen_sample06_numa_awared_queue_irq_affinity.sh b/samples/pktgen/pktgen_sample06_numa_awared_queue_irq_affinity.sh
index 728106060a02..7c73ab8fbe3c 100755
--- a/samples/pktgen/pktgen_sample06_numa_awared_queue_irq_affinity.sh
+++ b/samples/pktgen/pktgen_sample06_numa_awared_queue_irq_affinity.sh
@@ -15,7 +15,6 @@ root_check_run_with_sudo "$@"
source ${basedir}/parameters.sh
# Base Config
-DELAY="0" # Zero means max speed
[ -z "$COUNT" ] && COUNT="20000000" # Zero means indefinitely
[ -z "$CLONE_SKB" ] && CLONE_SKB="0"
--
2.17.1
Powered by blists - more mailing lists