lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20210125214430.24079-1-pchaudhary@linkedin.com>
Date:   Mon, 25 Jan 2021 13:44:30 -0800
From:   Praveen Chaudhary <praveen5582@...il.com>
To:     davem@...emloft.net, kuba@...nel.org, corbet@....net,
        kuznet@....inr.ac.ru, yoshfuji@...ux-ipv6.org,
        netdev@...r.kernel.org, linux-doc@...r.kernel.org,
        linux-kernel@...r.kernel.org
Cc:     dsahern@...il.com, Zhenggen Xu <zxu@...kedin.com>,
        David Ahern <dsahern@...nel.org>
Subject: [PATCH v4 net-next 1/1] Allow user to set metric on default route learned via Router Advertisement.

For IPv4, default route is learned via DHCPv4 and user is allowed to change
metric using config etc/network/interfaces. But for IPv6, default route can
be learned via RA, for which, currently a fixed metric value 1024 is used.

Ideally, user should be able to configure metric on default route for IPv6
similar to IPv4. This fix adds sysctl for the same.

Signed-off-by: Praveen Chaudhary <pchaudhary@...kedin.com>
Signed-off-by: Zhenggen Xu <zxu@...kedin.com>

Reviewed-by: David Ahern <dsahern@...nel.org>

Changes in v1.
1.) Correct the call to rt6_add_dflt_router.

Changes in v2.
1.) Replace accept_ra_defrtr_metric to ra_defrtr_metric.
2.) Change Type to __u32 instead of __s32.
3.) Change description in Documentation/networking/ip-sysctl.rst.
4.) Use proc_douintvec instead of proc_dointvec.
5.) Code style in ndisc_router_discovery().
6.) Change Type to u32 instead of unsigned int.

Changes in v3:
1.) Removed '---' and '```' from description.
2.) Remove stray ' after accept_ra_defrtr.
3.) Fix tab in net/ipv6/addrconf.c.

Changes in v4:
1.) Remove special case of 0 and use IP6_RT_PRIO_USER as default.
2.) Do not allow 0.
3.) Change Documentation accordingly.
4.) Remove extra brackets and compare with zero in ndisc_router_discovery().
5.) Remove compare with zero in rt6_add_dflt_router().

Logs:

For IPv4:

Config in etc/network/interfaces:
auto eth0
iface eth0 inet dhcp
    metric 4261413864

IPv4 Kernel Route Table:
$ ip route list
default via 172.21.47.1 dev eth0 metric 4261413864

FRR Table, if a static route is configured:
[In real scenario, it is useful to prefer BGP learned default route over DHCPv4 default route.]
Codes: K - kernel route, C - connected, S - static, R - RIP,
       O - OSPF, I - IS-IS, B - BGP, P - PIM, E - EIGRP, N - NHRP,
       T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
       > - selected route, * - FIB route

S>* 0.0.0.0/0 [20/0] is directly connected, eth0, 00:00:03
K   0.0.0.0/0 [254/1000] via 172.21.47.1, eth0, 6d08h51m

i.e. User can prefer Default Router learned via Routing Protocol in IPv4.
Similar behavior is not possible for IPv6, without this fix.

After fix [for IPv6]:
sudo sysctl -w net.ipv6.conf.eth0.net.ipv6.conf.eth0.ra_defrtr_metric=1996489705

IP monitor: [When IPv6 RA is received]
default via fe80::xx16:xxxx:feb3:ce8e dev eth0 proto ra metric 1996489705  pref high

Kernel IPv6 routing table
$ ip -6 route list
default via fe80::be16:65ff:feb3:ce8e dev eth0 proto ra metric 1996489705 expires 21sec hoplimit 64 pref high

FRR Table, if a static route is configured:
[In real scenario, it is useful to prefer BGP learned default route over IPv6 RA default route.]
Codes: K - kernel route, C - connected, S - static, R - RIPng,
       O - OSPFv3, I - IS-IS, B - BGP, N - NHRP, T - Table,
       v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
       > - selected route, * - FIB route

S>* ::/0 [20/0] is directly connected, eth0, 00:00:06
K   ::/0 [119/1001] via fe80::xx16:xxxx:feb3:ce8e, eth0, 6d07h43m

If the metric is changed later, the effect will be seen only when next IPv6
RA is received, because the default route must be fully controlled by RA msg.
Below metric is changed from 1996489705 to 1996489704.

$ sudo sysctl -w net.ipv6.conf.eth0.ra_defrtr_metric=1996489704
net.ipv6.conf.eth0.ra_defrtr_metric = 1996489704

IP monitor:
[On next IPv6 RA msg, Kernel deletes prev route and installs new route with updated metric]

Deleted default via fe80::xx16:xxxx:feb3:ce8e dev eth0 proto ra metric 1996489705  expires 3sec hoplimit 64 pref high
default via fe80::xx16:xxxx:feb3:ce8e dev eth0 proto ra metric 1996489704  pref high
---
 Documentation/networking/ip-sysctl.rst | 10 ++++++++++
 include/linux/ipv6.h                   |  1 +
 include/net/ip6_route.h                |  3 ++-
 include/uapi/linux/ipv6.h              |  1 +
 include/uapi/linux/sysctl.h            |  1 +
 net/ipv6/addrconf.c                    | 11 +++++++++++
 net/ipv6/ndisc.c                       | 12 ++++++++----
 net/ipv6/route.c                       |  5 +++--
 8 files changed, 37 insertions(+), 7 deletions(-)

diff --git a/Documentation/networking/ip-sysctl.rst b/Documentation/networking/ip-sysctl.rst
index dd2b12a32b73..0e51ddd9a2f1 100644
--- a/Documentation/networking/ip-sysctl.rst
+++ b/Documentation/networking/ip-sysctl.rst
@@ -1871,6 +1871,16 @@ accept_ra_defrtr - BOOLEAN
 		- enabled if accept_ra is enabled.
 		- disabled if accept_ra is disabled.
 
+ra_defrtr_metric - UNSIGNED INTEGER
+	Route metric for default route learned in Router Advertisement. This value
+	will be assigned as metric for the default route learned via IPv6 Router
+	Advertisement. Takes affect only if accept_ra_defrtr is enabled.
+
+	Possible values:
+		1 to 0xFFFFFFFF
+
+		Default: IP6_RT_PRIO_USER i.e. 1024.
+
 accept_ra_from_local - BOOLEAN
 	Accept RA with source-address that is found on local machine
 	if the RA is otherwise proper and able to be accepted.
diff --git a/include/linux/ipv6.h b/include/linux/ipv6.h
index dda61d150a13..9d1f29f0c512 100644
--- a/include/linux/ipv6.h
+++ b/include/linux/ipv6.h
@@ -31,6 +31,7 @@ struct ipv6_devconf {
 	__s32		max_desync_factor;
 	__s32		max_addresses;
 	__s32		accept_ra_defrtr;
+	__u32		ra_defrtr_metric;
 	__s32		accept_ra_min_hop_limit;
 	__s32		accept_ra_pinfo;
 	__s32		ignore_routes_with_linkdown;
diff --git a/include/net/ip6_route.h b/include/net/ip6_route.h
index 2a5277758379..f51a118bfce8 100644
--- a/include/net/ip6_route.h
+++ b/include/net/ip6_route.h
@@ -174,7 +174,8 @@ struct fib6_info *rt6_get_dflt_router(struct net *net,
 				     struct net_device *dev);
 struct fib6_info *rt6_add_dflt_router(struct net *net,
 				     const struct in6_addr *gwaddr,
-				     struct net_device *dev, unsigned int pref);
+				     struct net_device *dev, unsigned int pref,
+				     u32 defrtr_usr_metric);
 
 void rt6_purge_dflt_routers(struct net *net);
 
diff --git a/include/uapi/linux/ipv6.h b/include/uapi/linux/ipv6.h
index 13e8751bf24a..70603775fe91 100644
--- a/include/uapi/linux/ipv6.h
+++ b/include/uapi/linux/ipv6.h
@@ -189,6 +189,7 @@ enum {
 	DEVCONF_ACCEPT_RA_RT_INFO_MIN_PLEN,
 	DEVCONF_NDISC_TCLASS,
 	DEVCONF_RPL_SEG_ENABLED,
+	DEVCONF_RA_DEFRTR_METRIC,
 	DEVCONF_MAX
 };
 
diff --git a/include/uapi/linux/sysctl.h b/include/uapi/linux/sysctl.h
index 458179df9b27..1e05d3caa712 100644
--- a/include/uapi/linux/sysctl.h
+++ b/include/uapi/linux/sysctl.h
@@ -571,6 +571,7 @@ enum {
 	NET_IPV6_ACCEPT_SOURCE_ROUTE=25,
 	NET_IPV6_ACCEPT_RA_FROM_LOCAL=26,
 	NET_IPV6_ACCEPT_RA_RT_INFO_MIN_PLEN=27,
+	NET_IPV6_RA_DEFRTR_METRIC=28,
 	__NET_IPV6_MAX
 };
 
diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c
index eff2cacd5209..7aff1a81b7f5 100644
--- a/net/ipv6/addrconf.c
+++ b/net/ipv6/addrconf.c
@@ -205,6 +205,7 @@ static struct ipv6_devconf ipv6_devconf __read_mostly = {
 	.max_desync_factor	= MAX_DESYNC_FACTOR,
 	.max_addresses		= IPV6_MAX_ADDRESSES,
 	.accept_ra_defrtr	= 1,
+	.ra_defrtr_metric	= IP6_RT_PRIO_USER,
 	.accept_ra_from_local	= 0,
 	.accept_ra_min_hop_limit= 1,
 	.accept_ra_pinfo	= 1,
@@ -260,6 +261,7 @@ static struct ipv6_devconf ipv6_devconf_dflt __read_mostly = {
 	.max_desync_factor	= MAX_DESYNC_FACTOR,
 	.max_addresses		= IPV6_MAX_ADDRESSES,
 	.accept_ra_defrtr	= 1,
+	.ra_defrtr_metric	= IP6_RT_PRIO_USER,
 	.accept_ra_from_local	= 0,
 	.accept_ra_min_hop_limit= 1,
 	.accept_ra_pinfo	= 1,
@@ -5475,6 +5477,7 @@ static inline void ipv6_store_devconf(struct ipv6_devconf *cnf,
 	array[DEVCONF_MAX_DESYNC_FACTOR] = cnf->max_desync_factor;
 	array[DEVCONF_MAX_ADDRESSES] = cnf->max_addresses;
 	array[DEVCONF_ACCEPT_RA_DEFRTR] = cnf->accept_ra_defrtr;
+	array[DEVCONF_RA_DEFRTR_METRIC] = cnf->ra_defrtr_metric;
 	array[DEVCONF_ACCEPT_RA_MIN_HOP_LIMIT] = cnf->accept_ra_min_hop_limit;
 	array[DEVCONF_ACCEPT_RA_PINFO] = cnf->accept_ra_pinfo;
 #ifdef CONFIG_IPV6_ROUTER_PREF
@@ -6667,6 +6670,14 @@ static const struct ctl_table addrconf_sysctl[] = {
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec,
 	},
+	{
+		.procname	= "ra_defrtr_metric",
+		.data		= &ipv6_devconf.ra_defrtr_metric,
+		.maxlen		= sizeof(u32),
+		.mode		= 0644,
+		.proc_handler	= proc_douintvec_minmax,
+		.extra1		= (void *)SYSCTL_ONE,
+	},
 	{
 		.procname	= "accept_ra_min_hop_limit",
 		.data		= &ipv6_devconf.accept_ra_min_hop_limit,
diff --git a/net/ipv6/ndisc.c b/net/ipv6/ndisc.c
index 76717478f173..c467c6419893 100644
--- a/net/ipv6/ndisc.c
+++ b/net/ipv6/ndisc.c
@@ -1173,6 +1173,7 @@ static void ndisc_router_discovery(struct sk_buff *skb)
 	struct neighbour *neigh = NULL;
 	struct inet6_dev *in6_dev;
 	struct fib6_info *rt = NULL;
+	u32 defrtr_usr_metric;
 	struct net *net;
 	int lifetime;
 	struct ndisc_options ndopts;
@@ -1303,18 +1304,21 @@ static void ndisc_router_discovery(struct sk_buff *skb)
 			return;
 		}
 	}
-	if (rt && lifetime == 0) {
+	/* Set default route metric as specified by user */
+	defrtr_usr_metric = in6_dev->cnf.ra_defrtr_metric;
+	/* delete the route if lifetime is 0 or if metric needs change */
+	if (rt && (lifetime == 0 || rt->fib6_metric != defrtr_usr_metric)) {
 		ip6_del_rt(net, rt, false);
 		rt = NULL;
 	}
 
-	ND_PRINTK(3, info, "RA: rt: %p  lifetime: %d, for dev: %s\n",
-		  rt, lifetime, skb->dev->name);
+	ND_PRINTK(3, info, "RA: rt: %p  lifetime: %d, metric: %d, for dev: %s\n",
+		  rt, lifetime, defrtr_usr_metric, skb->dev->name);
 	if (!rt && lifetime) {
 		ND_PRINTK(3, info, "RA: adding default router\n");
 
 		rt = rt6_add_dflt_router(net, &ipv6_hdr(skb)->saddr,
-					 skb->dev, pref);
+					 skb->dev, pref, defrtr_usr_metric);
 		if (!rt) {
 			ND_PRINTK(0, err,
 				  "RA: %s failed to add default route\n",
diff --git a/net/ipv6/route.c b/net/ipv6/route.c
index 188e114b29b4..41d8f801b75f 100644
--- a/net/ipv6/route.c
+++ b/net/ipv6/route.c
@@ -4252,11 +4252,12 @@ struct fib6_info *rt6_get_dflt_router(struct net *net,
 struct fib6_info *rt6_add_dflt_router(struct net *net,
 				     const struct in6_addr *gwaddr,
 				     struct net_device *dev,
-				     unsigned int pref)
+				     unsigned int pref,
+				     u32 defrtr_usr_metric)
 {
 	struct fib6_config cfg = {
 		.fc_table	= l3mdev_fib_table(dev) ? : RT6_TABLE_DFLT,
-		.fc_metric	= IP6_RT_PRIO_USER,
+		.fc_metric	= defrtr_usr_metric,
 		.fc_ifindex	= dev->ifindex,
 		.fc_flags	= RTF_GATEWAY | RTF_ADDRCONF | RTF_DEFAULT |
 				  RTF_UP | RTF_EXPIRES | RTF_PREF(pref),

base-commit: 139711f033f636cc78b6aaf7363252241b9698ef
-- 
2.29.0

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ