netdev - Re: [PATCH v2] lan743x: add virtual PHY for PHY-less devices

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <2014021.cZaaFtpcjn@metabook>
Date:   Mon, 25 Jan 2021 13:23:25 +0300
From:   Sergej Bauer <sbauer@...ckbox.su>
To:     Andrew Lunn <andrew@...n.ch>
Cc:     netdev@...r.kernel.org, f.fainelli@...il.com,
        "David S. Miller" <davem@...emloft.net>,
        Jakub Kicinski <kuba@...nel.org>,
        Bryan Whitehead <bryan.whitehead@...rochip.com>,
        UNGLinuxDriver@...rochip.com,
        Simon Horman <simon.horman@...ronome.com>,
        Mark Einon <mark.einon@...il.com>,
        Madalin Bucur <madalin.bucur@....nxp.com>,
        Arnd Bergmann <arnd@...db.de>,
        Masahiro Yamada <masahiroy@...nel.org>,
        linux-kernel@...r.kernel.org
Subject: Re: [PATCH v2] lan743x: add virtual PHY for PHY-less devices

On Saturday, January 23, 2021 2:23:25 AM MSK Andrew Lunn wrote:
> > > > @@ -1000,8 +1005,10 @@ static void lan743x_phy_close(struct
> > > > lan743x_adapter *adapter)>
> > > > 
> > > >  	struct net_device *netdev = adapter->netdev;
> > > >  	
> > > >  	phy_stop(netdev->phydev);
> > > > 
> > > > -	phy_disconnect(netdev->phydev);
> > > > -	netdev->phydev = NULL;
> > > > +	if (phy_is_pseudo_fixed_link(netdev->phydev))
> > > > +		lan743x_virtual_phy_disconnect(netdev->phydev);
> > > > +	else
> > > > +		phy_disconnect(netdev->phydev);
> > > 
> > > phy_disconnect() should work. You might want to call
> 
> There are drivers which call phy_disconnect() on a fixed_link. e.g.
> 
> https://elixir.bootlin.com/linux/v5.11-rc4/source/drivers/net/usb/lan78xx.c#
> L3555.
> 
> It could be your missing call to fixed_phy_unregister() is leaving
> behind bad state.
> 
fixed_phy_unregister() were inside of lan743x_virtual_phy_disconnect()

> > It was to make ethtool show full set of supported speeds and MII only in
> > supported ports (without TP and the no any ports in the bare card).
> 
> But fixed link does not support the full set of speed. It is fixed. It
> supports only one speed it is configured with.  And by setting it
> wrongly, you are going to allow the user to do odd things, like use
> ethtool force the link speed to a speed which is not actually
> supported.
when writing virtual phy i have used "Microchip AN2948 Configuration Registers
of LAN743x" document and the lan743x is designed only for LAN7430 either
LAN7431 as it pointed in the document and in lan743x_pcidev_tbl. which both
support speeds 10/100/1000 Mbps.


-- 
                                Regards,
                                    Sergej.