[<prev] [next>] [day] [month] [year] [list]
Message-ID: <1611858682-9845-19-git-send-email-stefanc@marvell.com>
Date: Thu, 28 Jan 2021 20:31:22 +0200
From: <stefanc@...vell.com>
To: <netdev@...r.kernel.org>
CC: <thomas.petazzoni@...tlin.com>, <davem@...emloft.net>,
<nadavh@...vell.com>, <ymarkman@...vell.com>,
<linux-kernel@...r.kernel.org>, <stefanc@...vell.com>,
<kuba@...nel.org>, <linux@...linux.org.uk>, <mw@...ihalf.com>,
<andrew@...n.ch>, <rmk+kernel@...linux.org.uk>,
<atenart@...nel.org>
Subject: [PATCH v5 net-next 18/18] net: mvpp2: add TX FC firmware check
From: Stefan Chulski <stefanc@...vell.com>
Patch check that TX FC firmware is running in CM3.
If not, global TX FC would be disabled.
Signed-off-by: Stefan Chulski <stefanc@...vell.com>
---
drivers/net/ethernet/marvell/mvpp2/mvpp2.h | 1 +
drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c | 42 ++++++++++++++++----
2 files changed, 36 insertions(+), 7 deletions(-)
diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2.h b/drivers/net/ethernet/marvell/mvpp2/mvpp2.h
index 9947385..25013a4 100644
--- a/drivers/net/ethernet/marvell/mvpp2/mvpp2.h
+++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2.h
@@ -829,6 +829,7 @@
#define MSS_THRESHOLD_STOP 768
#define MSS_THRESHOLD_START 1024
+#define MSS_FC_MAX_TIMEOUT 5000
/* RX buffer constants */
#define MVPP2_SKB_SHINFO_SIZE \
diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
index 98849b0..0273134 100644
--- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
+++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
@@ -932,6 +932,34 @@ static void mvpp2_bm_pool_update_fc(struct mvpp2_port *port,
spin_unlock_irqrestore(&port->priv->mss_spinlock, flags);
}
+static int mvpp2_enable_global_fc(struct mvpp2 *priv)
+{
+ int val, timeout = 0;
+
+ /* Enable global flow control. In this stage global
+ * flow control enabled, but still disabled per port.
+ */
+ val = mvpp2_cm3_read(priv, MSS_FC_COM_REG);
+ val |= FLOW_CONTROL_ENABLE_BIT;
+ mvpp2_cm3_write(priv, MSS_FC_COM_REG, val);
+
+ /* Check if Firmware running and disable FC if not*/
+ val |= FLOW_CONTROL_UPDATE_COMMAND_BIT;
+ mvpp2_cm3_write(priv, MSS_FC_COM_REG, val);
+
+ while (timeout < MSS_FC_MAX_TIMEOUT) {
+ val = mvpp2_cm3_read(priv, MSS_FC_COM_REG);
+
+ if (!(val & FLOW_CONTROL_UPDATE_COMMAND_BIT))
+ return 0;
+ usleep_range(10, 20);
+ timeout++;
+ }
+
+ priv->global_tx_fc = false;
+ return -EOPNOTSUPP;
+}
+
/* Release buffer to BM */
static inline void mvpp2_bm_pool_put(struct mvpp2_port *port, int pool,
dma_addr_t buf_dma_addr,
@@ -7281,7 +7309,7 @@ static int mvpp2_probe(struct platform_device *pdev)
struct resource *res;
void __iomem *base;
int i, shared;
- int err, val;
+ int err;
priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
@@ -7509,13 +7537,13 @@ static int mvpp2_probe(struct platform_device *pdev)
goto err_port_probe;
}
- /* Enable global flow control. In this stage global
- * flow control enabled, but still disabled per port.
- */
if (priv->global_tx_fc && priv->hw_version != MVPP21) {
- val = mvpp2_cm3_read(priv, MSS_FC_COM_REG);
- val |= FLOW_CONTROL_ENABLE_BIT;
- mvpp2_cm3_write(priv, MSS_FC_COM_REG, val);
+ err = mvpp2_enable_global_fc(priv);
+ if (err) {
+ dev_warn(&pdev->dev, "CM3 firmware not running, version should be higher than 18.09 ");
+ dev_warn(&pdev->dev, "and chip revision B0\n");
+ dev_warn(&pdev->dev, "Flow control not supported\n");
+ }
}
mvpp2_dbgfs_init(priv, pdev->name);
--
1.9.1
Powered by blists - more mailing lists