| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20210129010009.3959398-11-olteanv@gmail.com>
Date: Fri, 29 Jan 2021 03:00:08 +0200
From: Vladimir Oltean <olteanv@...il.com>
To: "David S . Miller" <davem@...emloft.net>,
Jakub Kicinski <kuba@...nel.org>, netdev@...r.kernel.org
Cc: Andrew Lunn <andrew@...n.ch>,
Florian Fainelli <f.fainelli@...il.com>,
Vivien Didelot <vivien.didelot@...il.com>,
Claudiu Manoil <claudiu.manoil@....com>,
Alexandre Belloni <alexandre.belloni@...tlin.com>,
Vladimir Oltean <vladimir.oltean@....com>,
UNGLinuxDriver@...rochip.com
Subject: [PATCH v8 net-next 10/11] net: dsa: add a second tagger for Ocelot switches based on tag_8021q
From: Vladimir Oltean <vladimir.oltean@....com>
There are use cases for which the existing tagger, based on the NPI
(Node Processor Interface) functionality, is insufficient.
Namely:
- Frames injected through the NPI port bypass the frame analyzer, so no
source address learning is performed, no TSN stream classification,
etc.
- Flow control is not functional over an NPI port (PAUSE frames are
encapsulated in the same Extraction Frame Header as all other frames)
- There can be at most one NPI port configured for an Ocelot switch. But
in NXP LS1028A and T1040 there are two Ethernet CPU ports. The non-NPI
port is currently either disabled, or operated as a plain user port
(albeit an internally-facing one). Having the ability to configure the
two CPU ports symmetrically could pave the way for e.g. creating a LAG
between them, to increase bandwidth seamlessly for the system.
So there is a desire to have an alternative to the NPI mode. This change
keeps the default tagger for the Seville and Felix switches as "ocelot",
but it can be changed via the following device attribute:
echo ocelot-8021q > /sys/class/<dsa-master>/dsa/tagging
Signed-off-by: Vladimir Oltean <vladimir.oltean@....com>
Reviewed-by: Florian Fainelli <f.fainelli@...il.com>
---
Changes in v7:
Made struct dsa_device_ops const and gave it a unique name to
distinguish from the NPI-based tagger.
Changes in v6:
None.
Changes in v5:
Path is split from previous monolithic patch "net: dsa: felix: add new
VLAN-based tagger".
MAINTAINERS | 1 +
drivers/net/dsa/ocelot/Kconfig | 2 +
include/net/dsa.h | 2 +
net/dsa/Kconfig | 21 +++++++++--
net/dsa/Makefile | 1 +
net/dsa/tag_ocelot_8021q.c | 68 ++++++++++++++++++++++++++++++++++
6 files changed, 92 insertions(+), 3 deletions(-)
create mode 100644 net/dsa/tag_ocelot_8021q.c
diff --git a/MAINTAINERS b/MAINTAINERS
index 650deb973913..9f5d5bc3dd2e 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -12850,6 +12850,7 @@ F: drivers/net/dsa/ocelot/*
F: drivers/net/ethernet/mscc/
F: include/soc/mscc/ocelot*
F: net/dsa/tag_ocelot.c
+F: net/dsa/tag_ocelot_8021q.c
F: tools/testing/selftests/drivers/net/ocelot/*
OCXL (Open Coherent Accelerator Processor Interface OpenCAPI) DRIVER
diff --git a/drivers/net/dsa/ocelot/Kconfig b/drivers/net/dsa/ocelot/Kconfig
index c110e82a7973..932b6b6fe817 100644
--- a/drivers/net/dsa/ocelot/Kconfig
+++ b/drivers/net/dsa/ocelot/Kconfig
@@ -6,6 +6,7 @@ config NET_DSA_MSCC_FELIX
depends on NET_VENDOR_FREESCALE
depends on HAS_IOMEM
select MSCC_OCELOT_SWITCH_LIB
+ select NET_DSA_TAG_OCELOT_8021Q
select NET_DSA_TAG_OCELOT
select FSL_ENETC_MDIO
select PCS_LYNX
@@ -19,6 +20,7 @@ config NET_DSA_MSCC_SEVILLE
depends on NET_VENDOR_MICROSEMI
depends on HAS_IOMEM
select MSCC_OCELOT_SWITCH_LIB
+ select NET_DSA_TAG_OCELOT_8021Q
select NET_DSA_TAG_OCELOT
select PCS_LYNX
help
diff --git a/include/net/dsa.h b/include/net/dsa.h
index 7ea3918b2e61..60acb9fca124 100644
--- a/include/net/dsa.h
+++ b/include/net/dsa.h
@@ -47,6 +47,7 @@ struct phylink_link_state;
#define DSA_TAG_PROTO_RTL4_A_VALUE 17
#define DSA_TAG_PROTO_HELLCREEK_VALUE 18
#define DSA_TAG_PROTO_XRS700X_VALUE 19
+#define DSA_TAG_PROTO_OCELOT_8021Q_VALUE 20
enum dsa_tag_protocol {
DSA_TAG_PROTO_NONE = DSA_TAG_PROTO_NONE_VALUE,
@@ -69,6 +70,7 @@ enum dsa_tag_protocol {
DSA_TAG_PROTO_RTL4_A = DSA_TAG_PROTO_RTL4_A_VALUE,
DSA_TAG_PROTO_HELLCREEK = DSA_TAG_PROTO_HELLCREEK_VALUE,
DSA_TAG_PROTO_XRS700X = DSA_TAG_PROTO_XRS700X_VALUE,
+ DSA_TAG_PROTO_OCELOT_8021Q = DSA_TAG_PROTO_OCELOT_8021Q_VALUE,
};
struct packet_type;
diff --git a/net/dsa/Kconfig b/net/dsa/Kconfig
index 2d226a5c085f..a45572cfb71a 100644
--- a/net/dsa/Kconfig
+++ b/net/dsa/Kconfig
@@ -105,11 +105,26 @@ config NET_DSA_TAG_RTL4_A
the Realtek RTL8366RB.
config NET_DSA_TAG_OCELOT
- tristate "Tag driver for Ocelot family of switches"
+ tristate "Tag driver for Ocelot family of switches, using NPI port"
select PACKING
help
- Say Y or M if you want to enable support for tagging frames for the
- Ocelot switches (VSC7511, VSC7512, VSC7513, VSC7514, VSC9959).
+ Say Y or M if you want to enable NPI tagging for the Ocelot switches
+ (VSC7511, VSC7512, VSC7513, VSC7514, VSC9953, VSC9959). In this mode,
+ the frames over the Ethernet CPU port are prepended with a
+ hardware-defined injection/extraction frame header. Flow control
+ (PAUSE frames) over the CPU port is not supported when operating in
+ this mode.
+
+config NET_DSA_TAG_OCELOT_8021Q
+ tristate "Tag driver for Ocelot family of switches, using VLAN"
+ select NET_DSA_TAG_8021Q
+ help
+ Say Y or M if you want to enable support for tagging frames with a
+ custom VLAN-based header. Frames that require timestamping, such as
+ PTP, are not delivered over Ethernet but over register-based MMIO.
+ Flow control over the CPU port is functional in this mode. When using
+ this mode, less TCAM resources (VCAP IS1, IS2, ES0) are available for
+ use with tc-flower.
config NET_DSA_TAG_QCA
tristate "Tag driver for Qualcomm Atheros QCA8K switches"
diff --git a/net/dsa/Makefile b/net/dsa/Makefile
index 92cea2132241..44bc79952b8b 100644
--- a/net/dsa/Makefile
+++ b/net/dsa/Makefile
@@ -15,6 +15,7 @@ obj-$(CONFIG_NET_DSA_TAG_RTL4_A) += tag_rtl4_a.o
obj-$(CONFIG_NET_DSA_TAG_LAN9303) += tag_lan9303.o
obj-$(CONFIG_NET_DSA_TAG_MTK) += tag_mtk.o
obj-$(CONFIG_NET_DSA_TAG_OCELOT) += tag_ocelot.o
+obj-$(CONFIG_NET_DSA_TAG_OCELOT_8021Q) += tag_ocelot_8021q.o
obj-$(CONFIG_NET_DSA_TAG_QCA) += tag_qca.o
obj-$(CONFIG_NET_DSA_TAG_SJA1105) += tag_sja1105.o
obj-$(CONFIG_NET_DSA_TAG_TRAILER) += tag_trailer.o
diff --git a/net/dsa/tag_ocelot_8021q.c b/net/dsa/tag_ocelot_8021q.c
new file mode 100644
index 000000000000..8991ebf098a3
--- /dev/null
+++ b/net/dsa/tag_ocelot_8021q.c
@@ -0,0 +1,68 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright 2020-2021 NXP Semiconductors
+ *
+ * An implementation of the software-defined tag_8021q.c tagger format, which
+ * also preserves full functionality under a vlan_filtering bridge. It does
+ * this by using the TCAM engines for:
+ * - pushing the RX VLAN as a second, outer tag, on egress towards the CPU port
+ * - redirecting towards the correct front port based on TX VLAN and popping
+ * that on egress
+ */
+#include <linux/dsa/8021q.h>
+#include "dsa_priv.h"
+
+static struct sk_buff *ocelot_xmit(struct sk_buff *skb,
+ struct net_device *netdev)
+{
+ struct dsa_port *dp = dsa_slave_to_port(netdev);
+ u16 tx_vid = dsa_8021q_tx_vid(dp->ds, dp->index);
+ u16 queue_mapping = skb_get_queue_mapping(skb);
+ u8 pcp = netdev_txq_to_tc(netdev, queue_mapping);
+
+ return dsa_8021q_xmit(skb, netdev, ETH_P_8021Q,
+ ((pcp << VLAN_PRIO_SHIFT) | tx_vid));
+}
+
+static struct sk_buff *ocelot_rcv(struct sk_buff *skb,
+ struct net_device *netdev,
+ struct packet_type *pt)
+{
+ int src_port, switch_id, qos_class;
+ u16 vid, tci;
+
+ skb_push_rcsum(skb, ETH_HLEN);
+ if (skb_vlan_tag_present(skb)) {
+ tci = skb_vlan_tag_get(skb);
+ __vlan_hwaccel_clear_tag(skb);
+ } else {
+ __skb_vlan_pop(skb, &tci);
+ }
+ skb_pull_rcsum(skb, ETH_HLEN);
+
+ vid = tci & VLAN_VID_MASK;
+ src_port = dsa_8021q_rx_source_port(vid);
+ switch_id = dsa_8021q_rx_switch_id(vid);
+ qos_class = (tci & VLAN_PRIO_MASK) >> VLAN_PRIO_SHIFT;
+
+ skb->dev = dsa_master_find_slave(netdev, switch_id, src_port);
+ if (!skb->dev)
+ return NULL;
+
+ skb->offload_fwd_mark = 1;
+ skb->priority = qos_class;
+
+ return skb;
+}
+
+static const struct dsa_device_ops ocelot_8021q_netdev_ops = {
+ .name = "ocelot-8021q",
+ .proto = DSA_TAG_PROTO_OCELOT_8021Q,
+ .xmit = ocelot_xmit,
+ .rcv = ocelot_rcv,
+ .overhead = VLAN_HLEN,
+};
+
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS_DSA_TAG_DRIVER(DSA_TAG_PROTO_OCELOT_8021Q);
+
+module_dsa_tag_driver(ocelot_8021q_netdev_ops);
--
2.25.1
Powered by blists - more mailing lists