| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1612025611-92016-1-git-send-email-gakula@marvell.com>
Date: Sat, 30 Jan 2021 22:23:31 +0530
From: Geetha sowjanya <gakula@...vell.com>
To: netdev@...r.kernel.org, linux-kernel@...r.kernel.org
Cc: sgoutham@...vell.com, davem@...emloft.net, kuba@...nel.org,
Geetha sowjanya <gakula@...vell.com>
Subject: [net-next 06/14] octeontx2-pf: cn10k: Map LMTST region
On CN10K platform transmit/receive buffer alloc and free from/to hardware
had changed to support burst operation. Whereas pervious silicon's only
support single buffer free at a time.
To Support the same firmware allocates a DRAM region for each PF/VF for
storing LMTLINES. These LMTLINES are used for NPA batch free and for
flushing SQE to the hardware.
PF/VF LMTST region is accessed via BAR4. PFs LMTST region is followed
by its VFs mbox memory. The size of region varies from 2KB to 256KB based
on number of LMTLINES configured.
This patch adds support for
- Mapping PF/VF LMTST region.
- Reserves 0-71 (RX + TX + XDP) LMTST lines for NPA batch
free operation.
- Reserves 72-512 LMTST lines for NIX SQE flush.
Signed-off-by: Geetha sowjanya <gakula@...vell.com>
Signed-off-by: Sunil Goutham <sgoutham@...vell.com>
---
.../ethernet/marvell/octeontx2/nic/otx2_common.h | 15 ++++++-
.../net/ethernet/marvell/octeontx2/nic/otx2_pf.c | 52 +++++++++++++++++++++-
.../net/ethernet/marvell/octeontx2/nic/otx2_vf.c | 37 ++++++++++++++-
3 files changed, 100 insertions(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.h b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.h
index e05a5d5..80f892f 100644
--- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.h
+++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.h
@@ -207,7 +207,14 @@ struct otx2_hw {
u8 lbk_links; /* No. of LBK links present in HW */
#define HW_TSO BIT_ULL(0)
#define CN10K_MBOX BIT_ULL(1)
+#define CN10K_LMTST BIT_ULL(2)
unsigned long cap_flag;
+
+#define LMT_LINE_SIZE 128
+#define NIX_LMTID_BASE 72 /* RX + TX + XDP */
+ void __iomem *lmt_base;
+ u64 *npa_lmt_base;
+ u64 *nix_lmt_base;
};
struct otx2_vf_config {
@@ -317,6 +324,10 @@ struct otx2_nic {
/* Block address of NIX either BLKADDR_NIX0 or BLKADDR_NIX1 */
int nix_blkaddr;
+ /* LMTST Lines info */
+ u16 tot_lmt_lines;
+ u16 nix_lmt_lines;
+ u32 nix_lmt_size;
struct otx2_ptp *ptp;
struct hwtstamp_config tstamp;
@@ -382,8 +393,10 @@ static inline void otx2_setup_dev_hw_settings(struct otx2_nic *pfvf)
pfvf->hw.rq_skid = 600;
pfvf->qset.rqe_cnt = Q_COUNT(Q_SIZE_1K);
}
- if (!is_dev_otx2(pfvf->pdev))
+ if (!is_dev_otx2(pfvf->pdev)) {
__set_bit(CN10K_MBOX, &hw->cap_flag);
+ __set_bit(CN10K_LMTST, &hw->cap_flag);
+ }
}
/* Register read/write APIs */
diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c
index 011a56d..4097559 100644
--- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c
+++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c
@@ -46,6 +46,39 @@ enum {
static int otx2_config_hw_tx_tstamp(struct otx2_nic *pfvf, bool enable);
static int otx2_config_hw_rx_tstamp(struct otx2_nic *pfvf, bool enable);
+static int cn10k_lmtst_init(struct otx2_nic *pf)
+{
+ int size, num_lines;
+ u64 base;
+
+ if (!test_bit(CN10K_LMTST, &pf->hw.cap_flag))
+ return 0;
+
+ base = pci_resource_start(pf->pdev, PCI_MBOX_BAR_NUM) +
+ (MBOX_SIZE * (pf->total_vfs + 1));
+
+ size = pci_resource_len(pf->pdev, PCI_MBOX_BAR_NUM) -
+ (MBOX_SIZE * (pf->total_vfs + 1));
+
+ pf->hw.lmt_base = ioremap(base, size);
+
+ if (!pf->hw.lmt_base) {
+ dev_err(pf->dev, "Unable to map PF LMTST region\n");
+ return -ENOMEM;
+ }
+
+ /* FIXME: Get the num of LMTST lines from LMT table */
+ pf->tot_lmt_lines = size / LMT_LINE_SIZE;
+ num_lines = (pf->tot_lmt_lines - NIX_LMTID_BASE) /
+ pf->hw.tx_queues;
+ /* Number of LMT lines per SQ queues */
+ pf->nix_lmt_lines = num_lines > 32 ? 32 : num_lines;
+
+ pf->nix_lmt_size = pf->nix_lmt_lines * LMT_LINE_SIZE;
+
+ return 0;
+}
+
static int otx2_change_mtu(struct net_device *netdev, int new_mtu)
{
bool if_up = netif_running(netdev);
@@ -1495,6 +1528,14 @@ int otx2_open(struct net_device *netdev)
if (!qset->rq)
goto err_free_mem;
+ if (test_bit(CN10K_LMTST, &pf->hw.cap_flag)) {
+ /* Reserve LMT lines for NPA AURA batch free */
+ pf->hw.npa_lmt_base = (__force u64 *)pf->hw.lmt_base;
+ /* Reserve LMT lines for NIX TX */
+ pf->hw.nix_lmt_base = (__force u64 *)((u64)pf->hw.npa_lmt_base +
+ (NIX_LMTID_BASE * LMT_LINE_SIZE));
+ }
+
err = otx2_init_hw_resources(pf);
if (err)
goto err_free_mem;
@@ -2333,6 +2374,8 @@ static int otx2_probe(struct pci_dev *pdev, const struct pci_device_id *id)
goto err_free_netdev;
}
+ otx2_setup_dev_hw_settings(pf);
+
/* Init PF <=> AF mailbox stuff */
err = otx2_pfaf_mbox_init(pf);
if (err)
@@ -2358,7 +2401,9 @@ static int otx2_probe(struct pci_dev *pdev, const struct pci_device_id *id)
if (err)
goto err_detach_rsrc;
- otx2_setup_dev_hw_settings(pf);
+ err = cn10k_lmtst_init(pf);
+ if (err)
+ goto err_detach_rsrc;
/* Assign default mac address */
otx2_get_mac_from_af(netdev);
@@ -2443,6 +2488,8 @@ static int otx2_probe(struct pci_dev *pdev, const struct pci_device_id *id)
err_ptp_destroy:
otx2_ptp_destroy(pf);
err_detach_rsrc:
+ if (hw->lmt_base)
+ iounmap(hw->lmt_base);
otx2_detach_resources(&pf->mbox);
err_disable_mbox_intr:
otx2_disable_mbox_intr(pf);
@@ -2602,6 +2649,9 @@ static void otx2_remove(struct pci_dev *pdev)
otx2_ptp_destroy(pf);
otx2_mcam_flow_del(pf);
otx2_detach_resources(&pf->mbox);
+ if (pf->hw.lmt_base)
+ iounmap(pf->hw.lmt_base);
+
otx2_disable_mbox_intr(pf);
otx2_pfaf_mbox_destroy(pf);
pci_free_irq_vectors(pf->pdev);
diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_vf.c b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_vf.c
index 6a2dde2..0ab7cf8 100644
--- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_vf.c
+++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_vf.c
@@ -27,6 +27,31 @@ enum {
RVU_VF_INT_VEC_MBOX = 0x0,
};
+static int cn10k_lmtst_init(struct otx2_nic *vf)
+{
+ int size, num_lines;
+
+ if (!test_bit(CN10K_LMTST, &vf->hw.cap_flag))
+ return 0;
+
+ size = pci_resource_len(vf->pdev, PCI_MBOX_BAR_NUM);
+ vf->hw.lmt_base = ioremap_wc(pci_resource_start(vf->pdev,
+ PCI_MBOX_BAR_NUM),
+ size);
+ if (!vf->hw.lmt_base) {
+ dev_err(vf->dev, "Unable to map VF LMTST region\n");
+ return -ENOMEM;
+ }
+
+ vf->tot_lmt_lines = size / LMT_LINE_SIZE;
+ /* LMTST lines per SQ */
+ num_lines = (vf->tot_lmt_lines - NIX_LMTID_BASE) /
+ vf->hw.tx_queues;
+ vf->nix_lmt_lines = num_lines > 32 ? 32 : num_lines;
+ vf->nix_lmt_size = vf->nix_lmt_lines * LMT_LINE_SIZE;
+ return 0;
+}
+
static void otx2vf_process_vfaf_mbox_msg(struct otx2_nic *vf,
struct mbox_msghdr *msg)
{
@@ -536,6 +561,7 @@ static int otx2vf_probe(struct pci_dev *pdev, const struct pci_device_id *id)
goto err_free_irq_vectors;
}
+ otx2_setup_dev_hw_settings(vf);
/* Init VF <=> PF mailbox stuff */
err = otx2vf_vfaf_mbox_init(vf);
if (err)
@@ -559,7 +585,9 @@ static int otx2vf_probe(struct pci_dev *pdev, const struct pci_device_id *id)
if (err)
goto err_detach_rsrc;
- otx2_setup_dev_hw_settings(vf);
+ err = cn10k_lmtst_init(vf);
+ if (err)
+ goto err_detach_rsrc;
/* Assign default mac address */
otx2_get_mac_from_af(netdev);
@@ -611,6 +639,8 @@ static int otx2vf_probe(struct pci_dev *pdev, const struct pci_device_id *id)
return 0;
err_detach_rsrc:
+ if (hw->lmt_base)
+ iounmap(hw->lmt_base);
otx2_detach_resources(&vf->mbox);
err_disable_mbox_intr:
otx2vf_disable_mbox_intr(vf);
@@ -639,8 +669,11 @@ static void otx2vf_remove(struct pci_dev *pdev)
cancel_work_sync(&vf->reset_task);
unregister_netdev(netdev);
otx2vf_disable_mbox_intr(vf);
-
otx2_detach_resources(&vf->mbox);
+
+ if (vf->hw.lmt_base)
+ iounmap(vf->hw.lmt_base);
+
otx2vf_vfaf_mbox_destroy(vf);
pci_free_irq_vectors(vf->pdev);
pci_set_drvdata(pdev, NULL);
--
2.7.4
Powered by blists - more mailing lists