netdev - [PATCH bpf-next v4 5/6] selftests/bpf: XSK_TRACE_INVALID

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20210203074127.8616-6-ciara.loftus@intel.com>
Date:   Wed,  3 Feb 2021 07:41:26 +0000
From:   Ciara Loftus <ciara.loftus@...el.com>
To:     netdev@...r.kernel.org, bpf@...r.kernel.org,
        magnus.karlsson@...el.com, bjorn@...nel.org,
        weqaar.a.janjua@...el.com
Cc:     daniel@...earbox.net, Ciara Loftus <ciara.loftus@...el.com>
Subject: [PATCH bpf-next v4 5/6] selftests/bpf: XSK_TRACE_INVALID_FILLADDR test

This test supplies invalid addresses to the fill
queue at init. On RX, traces are expected which report
the invalid address which look like so:

xsk_packet_drop: netdev: ve3213 qid 0 reason: invalid fill addr: \
  addr 262144 not_used 0 not_used 0

The test validates that these traces were successfully generated.

Signed-off-by: Ciara Loftus <ciara.loftus@...el.com>
---
 tools/testing/selftests/bpf/test_xsk.sh  | 24 ++++++++++++++++++++
 tools/testing/selftests/bpf/xdpxceiver.c | 29 ++++++++++++++++++------
 2 files changed, 46 insertions(+), 7 deletions(-)

diff --git a/tools/testing/selftests/bpf/test_xsk.sh b/tools/testing/selftests/bpf/test_xsk.sh
index 5b4e42ac8c20..bc026da25d54 100755
--- a/tools/testing/selftests/bpf/test_xsk.sh
+++ b/tools/testing/selftests/bpf/test_xsk.sh
@@ -271,6 +271,30 @@ retval=$?
 test_status $retval "${TEST_NAME}"
 statusList+=($retval)
 
+### TEST 12
+TEST_NAME="SKB TRACE INVALID_FILLADDR"
+
+vethXDPgeneric ${VETH0} ${VETH1} ${NS1}
+
+params=("-S" "-t" "1" "-C" "${TRACEPKTS}")
+execxdpxceiver params
+
+retval=$?
+test_status $retval "${TEST_NAME}"
+statusList+=($retval)
+
+### TEST 13
+TEST_NAME="DRV TRACE INVALID_FILLADDR"
+
+vethXDPnative ${VETH0} ${VETH1} ${NS1}
+
+params=("-N" "-t" "1" "-C" "${TRACEPKTS}")
+execxdpxceiver params
+
+retval=$?
+test_status $retval "${TEST_NAME}"
+statusList+=($retval)
+
 ## END TESTS
 
 cleanup_exit ${VETH0} ${VETH1} ${NS1}
diff --git a/tools/testing/selftests/bpf/xdpxceiver.c b/tools/testing/selftests/bpf/xdpxceiver.c
index dda965c3d9ec..e63dc1c228ed 100644
--- a/tools/testing/selftests/bpf/xdpxceiver.c
+++ b/tools/testing/selftests/bpf/xdpxceiver.c
@@ -35,6 +35,8 @@
  *       mode is used
  *    e. Tracing - XSK_TRACE_DROP_PKT_TOO_BIG
  *       Increase the headroom size and send packets. Validate traces.
+ *    f. Tracing - XSK_TRACE_DROP_INVALID_FILLADDR
+ *       Populate the fill queue with invalid addresses. Validate traces.
  *
  * 2. AF_XDP DRV/Native mode
  *    Works on any netdevice with XDP_REDIRECT support, driver dependent. Processes
@@ -47,8 +49,9 @@
  *    - Only copy mode is supported because veth does not currently support
  *      zero-copy mode
  *    e. Tracing - XSK_TRACE_DROP_PKT_TOO_BIG
+ *    f. Tracing - XSK_TRACE_DROP_INVALID_FILLADDR
  *
- * Total tests: 10
+ * Total tests: 12
  *
  * Flow:
  * -----
@@ -276,7 +279,8 @@ static void xsk_configure_umem(struct ifobject *data, void *buffer, u64 size)
 {
 	int ret;
 	struct xsk_umem_config cfg = {
-		.fill_size = XSK_RING_PROD__DEFAULT_NUM_DESCS,
+		.fill_size = opt_trace_code == XSK_TRACE_DROP_INVALID_FILLADDR ? opt_pkt_count :
+						XSK_RING_PROD__DEFAULT_NUM_DESCS,
 		.comp_size = XSK_RING_CONS__DEFAULT_NUM_DESCS,
 		.frame_size = XSK_UMEM__DEFAULT_FRAME_SIZE,
 		.frame_headroom = XSK_UMEM__DEFAULT_FRAME_HEADROOM,
@@ -302,13 +306,21 @@ static void xsk_populate_fill_ring(struct xsk_umem_info *umem)
 {
 	int ret, i;
 	u32 idx;
+	u32 num_addrs = XSK_RING_PROD__DEFAULT_NUM_DESCS;
+	u32 invalid = 0;
 
-	ret = xsk_ring_prod__reserve(&umem->fq, XSK_RING_PROD__DEFAULT_NUM_DESCS, &idx);
-	if (ret != XSK_RING_PROD__DEFAULT_NUM_DESCS)
+	if (opt_trace_code == XSK_TRACE_DROP_INVALID_FILLADDR) {
+		num_addrs = opt_pkt_count;
+		invalid = num_frames * XSK_UMEM__DEFAULT_FRAME_SIZE;
+	}
+
+	ret = xsk_ring_prod__reserve(&umem->fq, num_addrs, &idx);
+	if (ret != num_addrs)
 		exit_with_error(ret);
-	for (i = 0; i < XSK_RING_PROD__DEFAULT_NUM_DESCS; i++)
-		*xsk_ring_prod__fill_addr(&umem->fq, idx++) = i * XSK_UMEM__DEFAULT_FRAME_SIZE;
-	xsk_ring_prod__submit(&umem->fq, XSK_RING_PROD__DEFAULT_NUM_DESCS);
+	for (i = 0; i < num_addrs; i++)
+		*xsk_ring_prod__fill_addr(&umem->fq, idx++) =
+			(i * XSK_UMEM__DEFAULT_FRAME_SIZE) + invalid;
+	xsk_ring_prod__submit(&umem->fq, num_addrs);
 }
 
 static int xsk_configure_socket(struct ifobject *ifobject)
@@ -1172,6 +1184,9 @@ int main(int argc, char **argv)
 		case XSK_TRACE_DROP_PKT_TOO_BIG:
 			reason_str = "packet too big";
 			break;
+		case XSK_TRACE_DROP_INVALID_FILLADDR:
+			reason_str = "invalid fill addr";
+			break;
 		default:
 			ksft_test_result_fail("ERROR: unsupported trace %i\n",
 						opt_trace_code);
-- 
2.17.1